HT1212 every time i connect it on itunes it says that it failed what should i do????help!!!!!

every time i connect my ipad2 to itunes it says that connection faled what should i do??????HELP!!!!!!!

- Try DFU mode and restore:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next try the manual install as described here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
After yo successfully download the file, plae the iPod in recovery mode and try a restore.
It sounds like the file is not fully downloaded before the recoverymode expires on the iPod.

Similar Messages

  • HT201263 I have tried this several times but cannot switch the ipod touch back on - but every time I connect it to itunes it says that is in recovery mode stil.  What am I doing wrong?

    I have tried several times to unlock my daughter's ipod touch by following the instructions, but so far I cannot turn the ipod back on.  Everytime it seems to be finished updating I unplug it and it again says that the ipod is disabled and gives me the prompt to start again.  Can someone help please?  Am I doing something wrong?

    - Try DFU mode and restore:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Next try the manual install as described here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    After yo successfully download the file, plae the iPod in recovery mode and try a restore.
    It sounds like the file is not fully downloaded before the recoverymode expires on the iPod.

  • Every time I try to download itunes 10. says unknown publisher. Whats next?

    every time I try to download itunes 10.5.8 after waiting up to 50 min. each time it wont download and has the message unknown publisher. Whats the next step?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Regards.

  • HT1926 Every time I try and download iTunes it says that iTunes Script is invalid

    I tried updating iTunes and it wouldnt work so I uninstalled every apple program on my computer and everything else has installed except iTunes. When it's almost done installing, something pops up saying that iTunes has an invalid signature and cannot be downloaded.
    Help me fix this!!

    Every time i try to download it, it says i have insufficient access to bonjour and to log in as administrator and i am logged in as the administrator.
    What's the precise text of the error message, please? (There's a couple of different ones I can think of that you might be getting.)

  • Every time I try to install Itunes, it says that I have to verify the package exists.

    I recently bought an ASUS X502C notebook and have not been able to install this in the last three months that I've had it. At first I thought it was the issue that it is a  32-bit computer but then I tried installing a 32-bit download of Itunes and it still didn't work.

    A quick thing to try:
    Download the iTunes insatller from
    http://www.apple.com/itunes/download/
    if you have not already done so.
    Right click on it and select Run as administrator.

  • I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing.

    I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing. And I can't download any app because problems with my account regarding the credit card but the information is correct and it says it is not!!!

    You'll have to contact iTunes store support regarding your credit card information problem: http://www.apple.com/emea/support/itunes/contact.html.  I'm not clear on what you're saying about your backup.  Are you saying that when you connect to iTunes it's asking you to restore from backup even though you already have?

  • I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. Help?

    I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. I've tried every single solution I've seen, and none of them work. I know the Classic is outdated, but my other iPod doesn't have nearly as much room. Can anyone help with this?

    See Corrupt iPod classic.
    tt2

  • Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost.  How can I fix this?

    Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost.  How can I fix this?

    Note For others.
    For the Port Changes (or server names in some cases) you have to be logged out to make changes on the Server Settings pane.
    9:41 PM      Friday; October 28, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?

    I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    The previous responses did not say how to place in recovery mode or DFU mode

  • I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?

    I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?

    What version of iTunes do you have installed? If you are trying to update to iOS 6 you need iTunes 10.7 or later.

  • HT201210 my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this

    my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this?

    Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
    iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

  • Spinning rainbow wheel every time I connect phone to itunes....

    I have an iphone (I'm not sure the model but I bought it in January). Did the recent software update and now every time I connect my phone it recognizes it in itunes and immediately starts with "verifying iphone" but in less than a minute if I click on anything in itunes or not it starts with a spinning rainbow wheel and the only way it stops is if I force quit itunes.
    I can't update, change, add, delete anythig on my phone and also as a result the itunes/ipod function on the phone doesn't work and also freezes up.
    Someone suggested I might have a bad file on there somewhere, like an mp3 or what have you, but how would I even go about deleting the music or the files if I can't even connect to itunes?
    Can I do a factory restore without connecting as well?

    I would try a normal restart first and if that doesn't help, try a reset.
    Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    If they don't work you can do the factory reset (without connecting) and when it's complete you'll have to register the phone again with iTunes.

  • Every time i try to download itunes it says insufficient access to bonjour.

    i recently bought a new toshiba laptop with windows seven, i have an iphone and have never had any problems with itunes before. I tried to download it to my new laptop in order to run updates to my phone. Every time i try to download it, it says i have insufficient access to bonjour and to log in as administrator and i am logged in as the administrator. Would really apreciate some help please.

    Every time i try to download it, it says i have insufficient access to bonjour and to log in as administrator and i am logged in as the administrator.
    What's the precise text of the error message, please? (There's a couple of different ones I can think of that you might be getting.)

  • I have been trying to set a new voicemail greeting on my iphone 4s but every time i check the 'save' button it says Voicemail Unavailable, try again later. Any help would be greatly appreciated! thanks

    I have been trying to set a new voicemail greeting on my iphone 4s but every time i check the 'save' button it says voicemail unavaliable, try again later. Really do not know what else to try. Any help would be greatly appreciated! thanks

    Voicemail is a Carrier feature... Contact your Carrier...
    But first... Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Every time I try to access iTunes I get Erorr (11333). What do I do???

    I ran a Diagnostics and this is what I got.
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Compaq Presario 061 PS513AA-ABA SR1313CL NA510
    iTunes 7.4.2.4
    Current user is an administrator.
    Network Adapter Information
    Adapter Name: {E6BF3977-9B72-4191-A736-CD3AAFF9314F}
    Description: Linksys Wireless-G USB Network Adapter #4 - Packet Scheduler Miniport
    IP Address: 192.168.1.101
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Tue Sep 25 16:51:07 2007
    Lease Expires: Wed Sep 26 16:51:07 2007
    DNS Servers: 68.87.77.130
    10.0.1.1
    Adapter Name: {0AFF400A-212D-46C0-9A0E-5508AB3D2C15}
    Description: VIA Compatable Fast Ethernet Adapter - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server: 168.94.2.51
    Lease Obtained: Thu Apr 20 08:06:46 2006
    Lease Expires: Thu Apr 20 10:05:40 2006
    DNS Servers:
    Adapter Name: {C6274013-7D8B-4A18-B533-1D9B87F6B0B7}
    Description: Hamachi Network Interface
    IP Address: 5.147.61.55
    Subnet Mask: 255.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server: 5.0.0.1
    Lease Obtained: Tue Sep 25 17:21:55 2007
    Lease Expires: Tue Sep 25 17:26:10 2007
    DNS Servers:
    Network Connection Information
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    McAfee Personal Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.

    Hello aristilus2,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing and reinstalling iTunes for the issue you described.  The following article has steps to do this, and I recommend removing iTunes and all related componenets as outlined in the article:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • In iPhoto'09 why can it not forget previous image names?

    iPhoto'09 - 27" iMac, 3.06 GHz Intel Core 2 Duo, 12gig RAM, OSX10.8.4, 1 TBHD In iPhoto'09 I renamed 29 images using Photos/Batch Change. I then exported the images full size to my desktop folder. Deleted the 29 images in iPhoto09 and emptied the iPh

  • IPhone 4s AT&T camera/video question

    I have an iPhone 4s AT&T.  I thought that I was to be able to shoot in 1080HD but I can only achieve 720.  Any help would be greatly appreciated.

  • XPR0 and XLR0

    Dear Experts, I'm reading last payroll result using AMT= O XXXX where XXXX is the wagetype calculated on the basis of Basic Pay. The requirement is the value of the wagetype should be unchanged except in the start of Financial Year. The value of Basi

  • Park Documents for T.codes F-28, F-44, and F-54

    Hello guru....! Here at one of My client requirement is parking documents while using T.codes F-28, F-44, and F-54. Is it possible to park documents while doing  any transactions using through above mention t.codes? also can we restrict through givin

  • Trouble with InstallShield X and .msm files

    I cannot use the distributed .msm files in InstallShield X - they give warnings(errors really) when included in an InstallShiel project. In addition, I cannot open the .msm files - I get "Error retrieving ModuleID for Table" messages. NIMesaDLL.msm C