HT1212 Hi i did the steps to restor my ipad (whech not sync befor) but after a while it says connot restore pecause it's locked? what i can do please??
Hi i did the steps for restor my locked ipad (whech not sync befor) but after a while it says connot restore pecause it's locked? what i can do please help?
You have to force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.
Similar Messages
-
I have attempted to update ipad1 with latest update but after extracting software it goes to restoring ipad software and stops at 25% on the bar. Have tried several times but it does the same, I now have one usless ipad help! any ideas ?
when connected click the iPad in the left navigation panel of iTunes, on the bottom of the summary tab: how much memory is "free" (grey)?
-
I am current in Sotheby's Africa and trying to FaceTime my daughter who also has the same ipad as me. My son in law also has the ipad. Despite using my daughters email, I cannot get through to her or my son in law. When I hit FaceTime I can hear the ringing tone, but after a while it comes up saying my daughter is not available, but she is sat by her ipad in the UK. I have checked everything is working so what can I do now to get through to her, especially for Xmas day.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers, Tom -
I've unchecked the boxes for apple e-mails (news and iTunes offers) after following the link at the bottom of a marketing e-mail from Apple.
Unfortunately I still get marketing info which I don't want. What else can I do to stop the spam?The e-mail checks out as having come from an IP address registered to Apple.
Received-SPF: pass (mxeu0: domain of insideapple.apple.com designates 17.254.6.124 as permitted sender) client-ip=17.254.6.124; envelope-from=[email protected]; helo=msbadger0204.apple.com;
The sender address wasn't spoofed and all the links in the mail lead to legitimate apple web sites. (It was an advert for a MacBook Air christmas special). There was a link at the bottom of the e-mail which takes me to the Apple 'manage your e-mails' page.
List-Unsubscribe: <http://mynews.apple.com/subscriptions?v=2&la=de_de&.....
On this page there are check boxes for the various Apple news and iTunes marketing e-mails, and the option to change my e-mail address. The boxes are not checked but I still get marketing e-mails. -
hello I'm experiencing some problems with my iMessage and face time. I did with Apple provided me online. I did the steps. Nothing will work, it keeps saying activation turn on Wi-Fi when my Wi-Fi is turned on. As soon as I got this on Christmas. iMessage and FaceTime have not been working. My Apple and ID password are correct. Everything else is working fine. My iOS updates are up to date, everything is fine except FaceTime and iMessage
Did you try everything here?
iOS: Troubleshooting Messages
Using FaceTime and iMessage behind a firewall
iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues
In the future saying your tried the Apple on-line articles does provide us with information as to which ones you found and tried -
i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi i try all the ways to turn it on but it didnt sucsses
roaminggnome
thanks for helping but i didnt know that is the downgrade is forbidden and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> -
what are the steps in Apple Configurator iPad restore? It appears to me that Configurator repeats steps, but it probably is that I don't know what happens and when.
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can get a clue to what it is, and potentially use it, by going to https://appleid.apple.com/ and clicking 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have, or don't want to use, your rescue email address (you won't be able to add/change it until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get them reset (which will be by phone as they need to verify your id - we are fellow users here on these forums).
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down this page to add/change rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
I forgot iphone 4 passcode and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
TS2446 My Apple ID disable , and I did the steps but still the message appearing the ID disable
Dears Support ,
I facing problem , when I'm trying to update my Applications and download
Any application , I facing message that my Apple ID disable , I did the step on apple website
Related to enable the Id through mange Account and reset the password
But still the ID disable , so please I need your help to identify the problem and how
I Can resolve it
By your advise ..,
Best Regards
<Email Edited By Host>Welcome to the user to User Technical Support Forum provided by Apple.
Please do not post personal information on a Public Forum.
I have requested the Hosts remove it for you.
For your issue...
If disabled for Security Reasons... See here http://support.apple.com/kb/TS2446
If not for Security reasons...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
i did all the steps to resolving the problem that my wi-fi does not turn on but it didnt work
Hello there, Ahmedalheety.
If you are unable to connect to WiFi with your phone, you will find pretty extensive steps at the following Knowledg Base article to resolve that issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?
Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
The post-expression for the step 'Set Station Global Models' could not be evaluated.
When running a TestStand sequence, I get the following error message:
The post-expression for the step 'Set Station Global Models' could not be evaluated.
Variable or property types do not match or are not compatible.
Error Code: -17321; Variable or property types do not match or are not compatible.
Although I do understand what the above is telling me, fixing the root cause is somewhat another thing.
I'll explain the scenario. The code is developped in TS4.1.0, although that should be irrelevant.
I inherited a TestStand project which calls LabVIEW modules. The original sequence works fine on the test pc (which is remotely located). The local and remote PC's share the same StationGlobals.ini.
Here is why it is strange.. I do get the error message on the local PC whether I use the old or the new code. I was assuming that using the same StationGlobals.ini would have fixed that, but it didn't.
When I run the old code on the remote PC, I do not get that message, but I do get it with the new code. I don't recall modifying code that affected the StationGlobals. My goal is to fix it on both machines (at least the remote one).
This is the expression that it does not like:
StationGlobals.Models=Locals.Models,
However, that very same expression exists in the original code. The one thing that did change is the addition of a new model number in the Locals.Models.newNumber. I suspect that this contributes to the error. But why does it give me an error when I run the original sequence locally? Maybe I should try running it again..
In either case, any suggestions to overcome the error?
Thanks.
RayR
Solved!
Go to Solution.Please ignore post.
I found the problem.. There was a mismatch with the number of models. Easy fix. It's all good.
For someone else who might tumble onto this thread for the same reason, here's an explanation.
I added a new model with its variants to the list of Locals.Models. In total, there were 16 additions to the list.
I also added these to the StationGlobals. Which meant that my StationGlobals no longer matched the one on the remote PC.
Where the error came in is that there was one missing model in the StationGlobals, so the size (number of models) did not match that of the Locals.
Slight oversight in the sea of models that are listed (I'm not even going to count them). Now fixed.
... and embarrassed ...
I may as well give myself an "Accepted Solution".
Spoiler (Highlight to read)
Since I've been naughty all year it will be my only Christmas gift..
Since I've been naughty all year it will be my only Christmas gift.. -
my gf did the latest update on our ipad using our new comp and she wasnt paying attention and she deleted all our our music and everything that we had on it and she said that it was all backed up is there any way to get all of our stuff back plz help
Right-click on device and select Restore from Backup
http://i1224.photobucket.com/albums/ee374/Diavonex/1bc072f9552ce822175eeed94fb0e 930.jpg -
Some of the songs I bought from iTunes will not sync to my iPhone. They show up on my phone, but the letters look faed and I can't play them. How do I fix this? I tried restoring my iPhone and it didn't work.
Sorry, I meant the letters look "faded" not faed.
-
I can not sync my iPhone after restoring it - my computer only gives me the restore (again and again and again) option. I have no music and only a few aps now on my iPhone. Any tips before I go to the genius bar?
If you restored as new, without using a backup, and still only get an option to restore, there is a hardware problem or the phone was previously hacked (jailbroken, downgraded iOS, unauthorized unlock). Your only option is to take it to Apple or whoever provides iPhone service in your country.
Maybe you are looking for
-
Using FW800 as 'scratch' disk for SD video capture does not work?
New iMac buyers beware - if you plan to capture video via FW400 (most SD camcorders do), you cannot capture directly to a FW800 disk. Workaround is to capture to your Mac HD first - there is no problem there. When my FW800 external disk is mounted an
-
External table not able to drop--Urgent Please
hi all I created external table asd in my schema but now asd not able to drop giving error table or view does not exist ? Regards
-
Turning on iMac G5 power PC only shows ? mark inside a tiny file folder on
When i booted up my G5 iMac today only a tiny file folder appeared in the center of the screen, inside it was a ? symbol alternating with a blue/black head cartoon. Apple technician said reset the PRAM. Immpossibe to hold down 4 keys and also turn th
-
Upgrade SharePoint 2007 SSRS integrated mode to SharePoint 2013 Reporting Service (SSRS-2014)
Hi We are upgrading a SP-2007 site with SSRS integrated reports to SP-2013 and SSRS-2014. As there are many changes done in SP-2013, I would like to know if any of the existing SP-2007 reporting service database need to upgraded to SP-2013 or just up
-
Problem invoking XI webservice
We have created a webservice on XI that calls the BAPI_COMPANYCODE_GETLIST on an R/3 4.6C system. We generated the WSDL using the Integration builder and corrected the URL to point to the webservice (rather than the wizard proposed URL). We can call