HT1212 how do i restore my i phone its locked out passcode entered to many times

i need to restore my i phone its locked out passcode entered to many times

Hello there, Kenny254
The following Knowledge Base article provides the steps for resolving your issue:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • How can i restore my ipod 2  my screen password was enter to many times knows it disable

    need help to restore my ipod 2 the screen lock password was entered wrong to many times it has disable me from useing it as my nephew tryed to get my password but he was wrong and lock / disable my ipod how can i do a factory reset or restore i know i might lose everything on it but please can someone tell me how to get it restored please

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT1212 how do i restore my ipod touch its disabled

    my ipod touch is disabled for 22000000 mins

    If IOS-7 is NOT installed and you have NOT turned on "Find my iPod," do the following:
    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.
    Otherwise, go here.

  • HT1212 how to close apps if your phone is locked because you forgot the password

    I need to close "find my iphone" in order to restore my phone. I don't know how to close this app

    Go to a computer.  Use its internet browser to sign on at http://www.icloud.com
    Go to Find My iPhone there.  Click on your device and choose "Remove This Device".

  • HT1212 My Ipad has been permanently lock because incorrect password has been enter too many times. Normally, it will ask to wait for 60 minutes but this is not available, the only option, it says to connect to Itunes.  I cannot connect to ITunes either.

    What can I do to unlock the IPAD if I cannot access the device by using computer? When I connect to computer, it says I have to unlock the IPad to connect to itunes.
    I try everything but I cannot figure out what to do. I turn off IPAD and it still stay in the connect to Itunes mode. It does not goes back to wait mode.
    Any suggestion would be appreciated.
    Thanks,
    Bill

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1212 An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode).  The ipad is now disabled,has never been connected to a computer .  Can it be opened without loosing what is on

    An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode).  The ipad is now disabled,has never been connected to a computer .  Can it be opened without loosing what is on it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1369 my iphone is disabled my entering my passcode incorrectly, how do i restore my the phone?

    hi all, my iphone is disabled by entering my passcode incorrectly, now it says connect to itunes, i have done that but the iphone is not being picked up, how do i restore my the phone?
    any help please?

    iPhone User Guide (For iOS 6 Software)

  • HT1212 how do i reboot an i phone when its locked out i have tried both ways DFU and also the way listed on the apple site

    how do reboot an i phone after its locked out i have tried both the apple list and a DFU and both do not let me delete and start over

    iOS- Troubleshooting update and restore issues
    Rebooting your iDevice
    Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The iPad should begin to start up.

  • How do i restore ringtones to phone after restore

    how do i restore ringtones to phone after restore

    Sync them back to your phone from your iTunes library (from the Tones tab of your iTunes sync settings).

  • I just started I cloud and merge it with my contacts. Now all my phone contacts deleted. Pls help me how do I restore my my phone contacts

    I just started I cloud and merge it with my contacts. Now all my phone contacts deleted. Pls help me how do I restore my my phone contacts

    Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

  • HT4859 I have 2 phones saved on iCloud, one is old phone and other is new. How do I restore my old phone data from iCloud to my new one?

    I have 2 phones saved on iCloud storage, one is old phone and other is my new one. How do I restore my old phone data from iCloud storage to my new one?
    It shows like 4.3GB is stored on my old and 105.9MB on my new. I want to restore the 4.3 to my new, how do I do that please?

    Welcome to the Apple community.
    You will need to restore your phone and when prompted use the backup that you made yesterday.
    Before you do so, you may wish to change your wife's iCloud login details, otherwise you may find that you then overwrite her data. She should have her own iCloud account to avoid this.

  • I forgot my phone lock code, how do i recover it so im not locked out permanently

    i forgot my phone lock code, how do i recover it so im not locked out permanently

    You'll have to wipe it out and restore from backup to recover, that'll reset the code but you'll lose any data since your last sync.

  • HT201328 how do i know if  a phone is locked or unlocked?

       how do i know if  a phone is locked or unlocked?           

    Where did you purchase it, & from whom? The only reliable way to determinr the phone's locked/unlocked status, if you don't know, is to call AppleCare.

  • How do I tell if my phone is 'locked' or 'unlocked' GSM?

    How do I tell if my phone is 'locked' or 'unlocked' GSM? Thanks!!

    All LTE phones (Android, iPhone, anuything) on VZW are GSM unlocked for the bands the phone supports. This is a restriction placed on Verizon due to the terms they sigend with the FCC for use of the 700 MHz spectrum for LTE.
    An iPhone 5 will work fine on T-Mobile or AT&T's GSM networks with 3G. They are not compatible for LTE due to the hardware included in the phone.
    If you want to tell, borrow a nano-SIM from someone with an AT&T or T-Mobile iPhone 5, place it in your phone, and watch as it works.

  • How do you restore a password on a locked folder made in disk utility?

    how do you restore a password on a locked folder made in disk utility?

    Hello there, HoseDwellers.
    The following Knowledge Base article as a great step by step instructional on how to change the password for the account:
    OS X: Changing or resetting an account password
    http://support.apple.com/kb/HT1274
    Resetting a user's password in OS X Lion and Mountain Lion
    Important: Passwords for administrator accounts should not be blank.
    Log in with an administrator account. Tip: If you don't know the password of any administrator accounts, see "Resetting the original administrator account password" below.
    From the Apple menu choose System Preferences.
    From the View menu choose Users & Groups.
    Click the lock button if it appears locked; enter the administrator password.
    Select the name of the user whose password you want to change.
    Click the Reset Password button or the Change Password button.
    Enter a new password in both the New Password and Verify fields, and add a Password Hint if desired.
    Click the Reset Password button or the Change Password button.This should get you taken care of.
    Remember, also, that you can restart the computer (you will be prompted to enter your administrator password) and this should log him out  so that when you log back in, you can then follow the above steps with success.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

Maybe you are looking for

  • Why do we create logical systems in ALE?

    Hi All,         i got this question in interview.     Why do we create logical systems in ALE? Thanks & Regards suresh

  • Issue with FKK_FIKEY_CHECK

    Hi,   I am facing an issue with FKK_FIKEY_CHECK function module. The FI Key value that is passed to the function module is not getting generated if it doesnt exist in the system. I am not facing any issue in the development. But in the quality system

  • How to Update this T-SQL Table?

    Hello, I am having trouble finding the correct syntax for updating this T-SQL table. Here is my Query which is adding an additional ' at the beginning and end. Query:     Update [denodo].[dbo].[wrappers]   SET wrapperWhereClause = '''AND County_Input

  • Error Unable to fetch authentication_scheme in application 134.

    Hi, I got the following error while migrating one of my application from one workspace to another in the same APEX (2.2) instance but the schemas are different in both cases. "Error Unable to fetch authentication_scheme in application 134." Here are

  • Americanidiot69 do you even own any creative produc

    Seems as if your 6 posts here have been nothing but ipod fanboy talk. Seriously we choose creative because we feel their products are superior to ipod. You dont see us talking bad about the ipod. We just feel that its not up there with other mp3 play