HT1212 How do i sync and reset my passcode if i forgot it?

I changed my passcode about 2 hours ago and was trying to read a text but it said that its the wrong passcode. I dont know if my finger slipped or not but now its disalbed and giving me 1 try an hour. How would i reset and sync the phone without knowing the passcode? because it asks for the the passcode to be entered on the phone when i dont know the passcode and dont get any attempts.

Check out this doc:
http://support.apple.com/kb/ht1212
= L.I.

Similar Messages

  • HT1212 How do I unlock and reset my 4s? . iPhone Disabled

    I recently purchased an iPhone online and it is loced and disabled. I attempted to connect to iTunes and add new device however this has not worked. How do I unlock this phone and reset it?

    Follow the instructions in this support document, like explained in the earlier part of the thread. Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • Iv'e synced and backed up my ipod onto my old laptop which has now broken, how can i sync and back it up on a new computer without everything being lost?

    Ive synced and backed up my iPod onto my old laptop which has now broken, how can i sync and bakc it up onto a new computer without everything being wiped?

    you will have to plug it into your new computer and connect it to itunes, then hit the backup button it should start backing up. THERE YOU GO! HOPE IT HELPED! please hit the "this solved my question" button

  • My last uncorrupted copy of my calendar is on my iPod Classic.  How do I sync and have the iPod calendar prevail?

    When I connected my iPod Touch, the calendar on Touch overwrote the calendar in Outlook.  My last backup is corrupted.  I found a good copy of the calendar on the Classic.  How do I sync and force the Classic calendar to overwrite Ouotlook?
    Thanks

    Forgot to mention I am running Win7 64bit, itunes10.

  • How do I erase and reset parental password?

    My 12yr old daughter set but doesn't remember the parental password on her ipod touch. How can I erase and reset everything?

    Two possible ways:
    - If you have a backup made without the Restrictions passcode, restore the iPod from the backup.
    - Restore the iPod to factory settings/new iPod.

  • HT1430 how do I reset my passcode if I forgot it? and if I disabled it?

    how do I reset my passcode if I forgot it? and if I disabled it?

    Boot into recovery mode, connect it to the computer and restore it

  • HT201263 how do i reset a passcode that i forgot on an ipod touch

    How do I reset a passcode if I forgot the original passcode on an ipod touch

    http://support.apple.com/kb/ht1212 this link will help you put the device in recovery mode and then you can restore it

  • HT1212 how can i sync my iphone to itunes as it is disabled and i cant do anything at all ?

    the phone is disabled and it wont let me do anything at all to it, and i need to sync it to itunes, but the problem is it hasnt been sync to a persific itunes.

    the Itunes doesnt read the phone as a device, but it doesnt have a problem syncing and reading my ipod. i want my itunes to read both and sync with both. how do i manually add a device to itunes?

  • My ipod will not sync after i got my computer back it wnats me to erase every thing how do i sync and still have all my apps and things like that

    ive tried to sync my ipod touch 3gen but every time ive tryed it say i have to erase every thing to get my new songs how do i sync it with out having to do that

    You can re download past purchases after you restore the iPod.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • N900 - How to update software and Reset ALL data.

    If you have tried to reset an N900 from the settings menu on the device, you would have noticed it would have left all your data intact.
    Sometimes you want to start from scratch and delete all data in one go. 
    Here is how you do it.
    Its quite extensive, but comprehensive.
    From a windows PC
    You first need to download three pieces of software.
    The first software you need is called "Maemo Flasher", and this is the program that needs to be installed on your PC and can be found here:
    http://tablets-dev.nokia.com/maemo-dev-env-downloads.php
    Download the latest version of Maemo Flasher (which is currently 3.5 at time of posting this), and make sure you download the .exe file (maemo_flasher-3.5_2.5.2.2.exe).
    Install that file.
    Next you need the software for the N900 itself.
    That can be found here:
    http://tablets-dev.nokia.com/nokia_N900.php
    This page will ask you to enter your IMEI, with very clear instructions on where to find it.
    Follow the on screen prompts until you reach the download section.
    There are two pieces of software you need to download from there.
    eMMC content - This is the package to erase all data held on your 32GB storage.
    The Operating System.
    OS 2009
    PR 1.1.1
    PR 1.2
    There are, unfortunately, 3 different names for the OS.
    Latest version is "PR 1.2 version 10.2010.19-1".
    Download the latest eMMC package available, It's version 10.2010.13-2.
    The OS is a little more difficult to figure out which one you need.
    The notes alongside the software lets you find the right package easier.
    I found the best way to check is to do the following: (On the N900)
    Menu
    Settings
    About Product
    This will show you this image(or similar)
    Note the Version number on your N900's screen.
    Download the OS package that matches the Version on your device. As shown in the image above, using the red text as an example.
    For people that purchased the N900 in the UK, the OS package will probably be the same as the red text. But make sure you check.
    Software downloads complete.
    Place these two software packages in the following location on your PC.
    c:\program files\maemo\flasher-3.5
    You should now have two .bin files in the directory above.
    Next steps.
    Updating the N900 OS
    Your battery needs to be 100% full to prevent any crashes which could leave your phone dead.
    Turn your N900 off.
    Press and hold the U key on the keypad.
    Insert the USB cable (a USB symbol should appear on the top right of your N900 screen, and also the Nokia logo in the centre).
    You can now let go of the U key.
    On your PC: Navigate to the Start Menu and select Run.
    In the Run box, type: cmd. Then OK
    In the command window, type: cd\program files\maemo\flasher-3.5
    Type: flasher-3.5 -F RX-51_2009SE_1.2009.42-11.203.2_PR_F5_203_ARM.bin -f
    (the file name above may be different to yours, you will need to replace the filename with the filename of the software you downloaded).
    This image below shows the completed update of the OS, in the command prompt on your PC. This would have now removed any Apps you may have installed on the device, and reset the homescreens to how they were when you turned it on for the first time.
    Your personal data, such as Contacts, Images, SMS will still be on the device.
    So if you want to remove these aswell, follow the next steps.
    Resetting the Mass Memory
    Your battery needs to be 100% full to prevent any crashes which could leave your phone dead.
    Turn your N900 off.
    Press and hold the U key on the keypad.
    Insert the USB cable (a USB symbol should appear on the top right of your N900 screen, and also the Nokia logo in the centre).
    You can now let go of the U key.
    (If you have left the command prompt open on your PC from updating the OS in the previous section, ignore steps 5,6,7)
    On your PC: Navigate to the Start Menu and select Run.
    In the Run box, type: cmd. Then OK
    In the command window, type: cd\program files\maemo\flasher-3.5
     Type: flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
    (the file name above may be different to yours, you will need to replace the filename with the filename of the software you downloaded).
    This image below shows the completed reset of the eMMC (32GB HDD), in the command prompt on your PC.
    This would have now removed any data you had stored there. Including Music, Photos, Contacts, SMS..
    The complete reset of your N900 is now complete.
    I hoped this has helped.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

    Hmm, it's odd, because the wiki.maemo and another thread here say it works fine on 7. I have put flasher into xp compatibility, but the cmd box has no way to change it - at least, if it does it's through a back route that i'm unaware of.
    Attached the screen i see
    Edit: what "run" dialog box? is that the cmd box?
    Attachments:
    cmd.jpg ‏55 KB

  • How to setup Sync and Stream for Different Photo Libraries?

    I've read through most posts, but still can't get ATV to both sync and stream photos.
    On my MBP I have my iTune library with music, movies, etc. I also have several iPhoto libraries for each year ('05, '06 '07, etc). I initially set up ATV to sync to my MBP iTune Library and my iPhoto '07 iPhoto library and everything went fine. Even if ATV->source->my music->photos, I get the photos streamed fine.
    The question is how do I stream the other iPhoto libraries? If I go into MBP-> iTunes->Devices->ATV->Photos and deselect sync, I can't select any other Photo Albums and lose the ones I just sync'ed. If I try ATV->source->my itune lib->connect to new iTunes->sync #, but then when I go to MBP-> iTunes->devices->ATV there is no window to insert the # to stream.
    What am I missing? Usually Apple is very logical, but this has me stumped. Basically I would like to sync and store my music on ATV, but be able to stream different photo libraries, the photos don't have to be stored on ATV. If I could sync some and stream others that would be better.
    Can anyone give me a step-by-step on how to do this? I must be missing a step somewhere. Thx

    Welcome to the  Discussion Forums.
    It's debatable whether you could ever sync and stream photos from the same library. tv v 1.1 gave that impression because it showed photos in a synced source and a streamed source when the source was the same library. However as they were effectively the same photos it was never really clear what was happening.
    Now that synced and streamed content is in the same menu under v 2.0 it really doesn't matter. If your itunes library is synced to your tv then you must sync your photos, if your itunes library is stream only then you must stream your photos.
    Moving on, because this doesn't actually address your problem, which is that you want to sync or stream multiple iphoto libraries from the same itunes library. Well you can't, although you have a couple of workarounds.
    If you must have multiple libraries, then you could open additional user accounts, stream the itunes libraries in those user accounts and allocate a single library to iphoto under each user account. This is quite messy if you have more than a couple of libraries and will not work with more than 5 libraries, which you may well have if you are working by years.
    Your second option and I don't think you'll like it too much is to put all your photos in one library. To be honest I'm not really sure why you split your photos up as you do, I would have thought that iphoto was more than capable of coping with photos from all years.

  • How do I sync and switch between multiple camera angles?

    I shot a concert with 3 HD cameras. I though it would be relatively simple to sync and cut between them but it's turning out to be much harder than I expected. I'm sure I'm not the first person to do this. Anybody have any tips and tricks on how best to combine these into a single multi-camera video?

    Multicamera editing is not easy with Premiere Elements.
    If you work in Mac environment, you can use Final Cut Pro X or Premiere Pro, they have multicamera functions which
    permit simple editing by showing simultaneously video clips and you can choose by clicking the one you want to have
    in the final movie.
    In Windows environment, you have tools like Premiere Pro, or Sony Vegas Pro or Magix video deluxe Pro that are
    natively supporting multicamera editing.
    One important point is synchronizing the clips. If you are musical expert, you can do it with the sound tracks and align on the
    sound curves, manually. Not easy for me, but I have a friend in my video group who makes it very well. In Mac environment,
    Final Cut Pro X has an automatic function to synchronize video tracks on sound track basis. In windows, I know
    there is a program : PluralEyes which does this synchro.
    These different tools are not free unfortunately.
    Best regards
    JM

  • HT1212 How can I sync an old iphone with a new number to itunes. The new phone with old number is still syncing ok?

    How can I sync an old iphone with a new number to itunes as I am already running a new iphone with an old number??

    Thanks it just wont work needs a passcode but that code is for the new phone. Will go to Apple shop tomorrow.

  • How to Wirelessly sync and connect my iPhone 5 to itunes?

    Hey i just wanna no if there is a way to sync iphone and contacts and trasfer songs and delete songs ect wirelessly to my mac itunes.
    just everything the same but without the cable
    Thanks

    With you phone connected to your computer and itunes open select your phone from the list on the left then click on summary tab, scroll down to OPTIONS and check the box beside Sync with this phone over wifi.  Now you will not need to connec the phone with a cable.  On your phone in settings/general tap on itunes wifi sync and then sync now.  Your phone needs to b epluged in to power and have wifi available

  • HT1212 I completed the steps and reset my IPad.  Now what it still says disabled.  This is not the origninal computer that I set up on.

    What is wrong with this thing? 

    Hello ahuycke,
    I would be be concerned too if I was not able to access my iPad.  If you have not resolved the issue, I recommend following the steps in the article belowfor an issue like this:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    As always, it is a good idea to create a backup before hand:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for