HT1212 how to enable my iphone after it has been disenabled?

How to enable my iphone after it has been disabled?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

Similar Messages

  • How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

    How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

    You have to restore the iPad in order to unlock it using these instructions.
    http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

  • HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer

    How do i restore an ipod that has been disabled and has never been conected to itunes

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • How to settle the expenses after AUC has been capitalised.

    Hi All,
    I have a understanding that after AUC has been settled, we can edit the settlement rule in WBS element and settle directly to the capitalised assets.
    I can not see the settlement rule but investment profile since the project being a Capital comes from Investment measure and automatically created.
    Can you tell me how to create a new settlement rule in this case. It is Urgent
    Regards
    VK

    Hi Vijay,
    This requires a change in the settlement rule since the AUC is no more and it must be the settlement reveiver earlier which should be changed to the main asset after capitalisation.
    Please go to Transaction code CJ20N, select the WBS and go to settlement rule via edit > Cost and set the receiver as the fixed assets itself instead of AUCV since AUC has been transferred to main assets.
    You can then settle using CJ8G or CJ88 but CJ88 is a better option.
    I think, I have answered the same query.
    Regards
    Bharat

  • Am I able to retrieve photos from an iPhone after it has been restored?

    Is it possible to retrieve photos from an iPhone 5s after it has been restored? I had taken photos on my new iPhone 5s prior to restoring the previous settings and I never saved these photos. When I restored my phone from the old backup, my new photos were gone. I don't think they were saved to iCloud either.

    Without a backup with the photos on it, you will not be able to recover them.

  • TS1424 How To Enable My Apple ID it has been Disabled

    I need help accessing I have tried everything to enable my. Apple It has been disabled, I've tried resseting my pass, logging in and out also contacted iTunes via email and phone but they cant help me!! Help please

    You need to contact itunes support.
    http://www.apple.com/support/contact/
    There is NO telephone support for itunes.  Use the link above.

  • How do I unlock iphone 5 that has been completely disabled, tried going to itunes?

    How do I unlock iphone 5 that is completely disabled?  It says to go to itunes, when going to itunes it says I need to have phone unlocked!  Thanks!

    If you mean your passcode lock:
    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.
    If you mean unlocked from your carrier, then contact them as they are the only ones who can unlock the phone.

  • I believe some how some way my iPhone or appleID has been hacked into.  My iPhone sent 3 iMessages out that I did not type or send - 2 while I was sleeping and one while I was in mid imessage conversation.  Please help if you know anything about this!

    I believe that my iPhone or apple ID has been hacked into.  Three imessages were sent from my phone that I did not type or send - two while I was asleep at 1:15am and in the morning during an iMessage conversation.  These messages were to my boyfriend about my boss.  Apple and AT&T have been somewhat helpful but both are pointing fingers at the others saying they cannot track the message or see if my personal information has been compromised.  I feel extremely violated because this hacker knows who my boyfriend is and who my boss is and I just started this job two weeks ago!  I am about to go to the police because this person is trying to taint my good reputation and destroy my relationships at work and in my personal life.  Does anyone have any incite on how this could be done and is there any way to trace where those three iMessages were generated from??

    No I have my own iPhone iPad and MacBook  so everything is set up on devices that are mine and as far as I know I never connected to anyone else's device and logged with my apple ID.  But are you saying it is possible for someone to have obtained my apple ID and send an iMessage from their device with my contact information so it looks like it came directly from me?  It's crazy I looked down at my iPhone and saw this message had just been sent that I did not type or send

  • HT1212 how can i restore a ipod that has been disabled with a different computer

    how can i restore a ipod touch that has been disabled with a different computer

    Restore it in Recovery Mode: http://support.apple.com/kb/HT1808

  • How to enable back the menu bar has been disable?

    I has been disable the menu bar. and i want to enable back
    == This happened ==
    Every time Firefox opened
    == when i disable the menu bar

    '''ALT V
    T
    M'''
    Be sure to do this in a blank tab.

  • How to restore Browsing History after it has been deleted.

    I need to restore the Browsing History of my computer. Once the history has been deleted, is it possible to find the information anywhere else on the computer?

    Hi.
    After create_column method you have to create cl_salv_wd_uie_text_view object:
      data:
        " Variables para configurar los ALVs.
        lr_alv_config_table  type ref to cl_salv_wd_config_table,
        lr_lr_wd_table_usage TYPE REF TO if_wd_component_usage,
        lr_wd_table          TYPE REF TO iwci_salv_wd_table,
        lr_table_settings    TYPE REF TO if_salv_wd_table_settings,
        lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
        lr_column            TYPE REF TO cl_salv_wd_column,
        lr_text              type ref to cl_salv_wd_uie_text_view,
        lr_header type ref to cl_salv_wd_column_header.
      " Initialize variables
      lr_lr_wd_table_usage = wd_this->wd_cpuse_alv_1001( ).
      if lr_lr_wd_table_usage->has_active_component( ) is initial.
        lr_lr_wd_table_usage->create_component( ).
      endif.
      lr_wd_table = wd_this->wd_cpifc_alv_1001( ).
      lr_alv_config_table = lr_wd_table->get_model( ).
      lr_column_settings ?= lr_alv_config_table.
      lr_table_settings ?= lr_alv_config_table.
      " Delete Column.
      lr_column_settings->delete_column( 'OBJID' ).
      " Create column.
      lr_column = lr_column_settings->create_column( 'OBJID' ).
      create object lr_text.
      lr_text->set_text_fieldname( 'OBJID' ).
      lr_column->set_cell_editor( lr_text ).
      " Change the header of the column.
      lr_column->GET_HEADER( receiving value = lr_header ).
      if lr_header is bound.
        lr_column->delete_HEADER( receiving value = lr_header ).
      endif.
      lr_column->create_HEADER( receiving value = lr_header ).
      lr_header->SET_TEXT( exporting value = 'Objid Field' ).

  • HT201210 how can i enable my device after it has been disabled and itunes wont connect to it?

    itunes wont connect to my device because it has a passode set. but i can not disable the passcode because my device is disabled. what can i do about it?

    Put iPhone into Recovery Mode. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes.

  • How do you unlock iPhone 5 which has been found by owner

    How do I unlock an iPhone Verizon phone that I thought lost but found it?

    How do I unlock an iPhone Verizon phone that I thought lost but found it?

  • ALV , How to add a Field after it has been deleted

    Hi,
    I am formating a ABAP Webdynpro ALV: I remove a field by using :
        l_value->if_salv_wd_column_settings~delete_column( lv_field_name).
    How will I be able to add the field again ?
    I tried the following :
        l_value->if_salv_wd_column_settings~CREATE_COLUMN( lv_field_name).
    but getting a 'null' object reference in the following standard code :
    if ls_column-r_column->r_cell_editor->visible_fieldname is initial.
    Regards

    Hi.
    After create_column method you have to create cl_salv_wd_uie_text_view object:
      data:
        " Variables para configurar los ALVs.
        lr_alv_config_table  type ref to cl_salv_wd_config_table,
        lr_lr_wd_table_usage TYPE REF TO if_wd_component_usage,
        lr_wd_table          TYPE REF TO iwci_salv_wd_table,
        lr_table_settings    TYPE REF TO if_salv_wd_table_settings,
        lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
        lr_column            TYPE REF TO cl_salv_wd_column,
        lr_text              type ref to cl_salv_wd_uie_text_view,
        lr_header type ref to cl_salv_wd_column_header.
      " Initialize variables
      lr_lr_wd_table_usage = wd_this->wd_cpuse_alv_1001( ).
      if lr_lr_wd_table_usage->has_active_component( ) is initial.
        lr_lr_wd_table_usage->create_component( ).
      endif.
      lr_wd_table = wd_this->wd_cpifc_alv_1001( ).
      lr_alv_config_table = lr_wd_table->get_model( ).
      lr_column_settings ?= lr_alv_config_table.
      lr_table_settings ?= lr_alv_config_table.
      " Delete Column.
      lr_column_settings->delete_column( 'OBJID' ).
      " Create column.
      lr_column = lr_column_settings->create_column( 'OBJID' ).
      create object lr_text.
      lr_text->set_text_fieldname( 'OBJID' ).
      lr_column->set_cell_editor( lr_text ).
      " Change the header of the column.
      lr_column->GET_HEADER( receiving value = lr_header ).
      if lr_header is bound.
        lr_column->delete_HEADER( receiving value = lr_header ).
      endif.
      lr_column->create_HEADER( receiving value = lr_header ).
      lr_header->SET_TEXT( exporting value = 'Objid Field' ).

  • How to get a report after blocks has been removed in MRBR

    Hi,
    After removing  the blocks manually in MRBR. We can see the invoices with X mark which had blocked for (price, qty or date) block in MRBR report.
    But when we remove the block automatically (i.e release block automatically), if we again go and check in MRBR their won't be any blocks (which shows "X" mark) in MRBR report.
    Can anyone suggest me is there any report which shows the invoices which got automatically released and the blocked reason (price /  qty / date block).
    Thank you,
    Vinay

    I'm 99.9% sure there is no such report or even possibility.
    Regards,
    Nick

Maybe you are looking for