HT1212 How to reset disabled ipod
My son's Ipod touch is disabled and says try again in 22,833,866 min, I know ridiculous..anyways what can I do?? to reset or get into the Ipod?ho
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Similar Messages
-
HT1212 how to reset the "ipod touch"
i need to know how to reset my ipod
If you forgot your screen-lock passcode:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
HT1212 how to reset your ipod touch
how to reset my ipod touch when wrong passcode results in red disabled screen?
Restore it. if you are unable to restore
iOS: Unable to update or restore
iPod touch User Guide (For iOS 5.1 Software) -
HT1212 how to reset an ipod touch
how do i reset my ipod please give me good info
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
If you forgot your screen-lock passcode:
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to reset disabled ipod touch 1rst generation
trying to reset 1rst generation ipod touch any help is appreciatied
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have forgot my password into my ipod touch device so i want to reset the whole thing anyone know how?
Read the article you linked
-
HT1212 how to erase disabled ipod
my son's ipod is disabled and the computer he synched to is broken. How can we wipe it?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup (if you have one) see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
HT1212 how to reset my ipod touch
my ipod don't start
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT1212 how to reset an i pod disable?
how to reset an ipod disable?
This will do nothing for a disabled ipod.
A restore or recovery mode is required as described in the article the OP linked -
How to reset my iPod touch thats disabled it doesn't work even charging
How to reset my iPod touch thats disabled it doesn't work even charging
If the sleep/wake button doesn't work use the home button and if the home button doesn't work it's the other way around, however if both of them don't work charge it with your connector connected with your computer or wall socket and it will turn on. Hope this helps.
-
HT1212 need to reset my ipod. it reads ipod disabled. never been sync to a computer
need to know how to reset my ipod. it has neverbeen sync with a computer.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
HT3728 how to reset my ipod touch
I have been locked out of my ipodtouch and do not know the passcode
Please check out the following Apple Support article for the details on how to reset your iPod.
-
How do you disable iPod Auto Update with iTunes?
How do you disable iPod Auto Update with iTunes? I know there is a key press combo that will do it but I forget which keys. Anyone?
Intel Piii Windows XP ProKeep iTunes from automatically updating your iPod
Another Easier Alternative:
While connecting the iPod to the computer, hold down the Shift + Ctrl keys in Windows (CMD + Option keys on a Mac). This will stop the iPod from auto-syncing with iTunes. The iPod will then appear in the iTunes source list. Wait until you are sure the iPod has mounted, and that it will not auto-sync and then you can release the keys. This action may take between 3 and 25 seconds depending on your computer.
You can then ‘right-click‘ on the iPod icon in iTunes’ source column and select iPod Options, then check the box that says “Manually manage songs and playlists”. You can now manage your library without losing any songs on the iPod.
Note: If connecting to a different computer than the ‘iPod’s Home Computer’, iTunes will ask you if you want to update your iPod and give you an opportunity to opt out. This will not happen if you connect to the ‘Home’ computer – iTunes will auto-sync without warning!. Best to know the difference. -
How to reset my ipod when i forgot the code
how to reset my ipod code when i forgot it
You must connect the device to iTunes and restore it to factory settings.
Restoring iPod to factory settings
B-rock -
How do you disable iPod touch 8gb 4th generation 6.1.3 for 21,000,000 minutes
To undisable the iPod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Need API for Credit Memo creation-R12
Hi All, I am working on R12 Implementation process. I have a requirement for creating the "Credit Memo" using API. Could you please any one provide the API for Credit Memo creation process. Thanks, LSP
-
Handling VI templates with executables (after Application Builder)
I've got an application in which I dynamically open a *.vit (VI template). I can open several instances of a user-configurable graph. It works great when running in the Labview environment, but when I create an executable... it doesn't work. Is there
-
Role of a Security Consultant in an SAP implementation Project
Hi All, What is the role of a Security Consultant in an SAP implementation Project and the stages in which he is involved?
-
We have a need to correct affinity of Cloud Service, Azure DB, Storage and Mobile Services such that they are on a singl datacenter and do not get impacted by network latency when these components communicate with each other. Also to distribute vario
-
Help: need to extract an application from oracle/apex directory
Hi, all! I worked on oracle10xe and apex 1.3.1 and then messed with partition table a bit so got my windows crashed and I don't believe i'll be able to restore it. so what i have is an oracle directory from the long-dead windows with apex inside, and