HT1212 i have forgotten my password of itunes, i have taken backup of contacts but is unable to restore . pls help i have my important data in back up
Dear Sir,
I have forgotten my password of itunes, i have taken backup of contacts but is unable to restore . pls help i have my important data in back up.
Waiting for reply
Thanks
Encrypted backup?
Read here:
http://support.apple.com/kb/TS5162
If the backup you're trying to restore from is encrypted, you will not be able to use that backup if you can't remember the encrypted backup passcode.
If on a Mac, & you elected to save the passcode to your Keychain, you can recover the passcode from your Keychain. Otherwise, your backup data is unrecoverable.
While you can continue to sync/backup, if you can't remember it & want to remove it, you'll have to delete your existing backups, & restore your phone as a new device.
You delete your existing backups here: iTunes>Preferences>Devices.
Similar Messages
-
i cant sync my iphone to my pc, it says uninstall then install d 64 bit version of itunes which i did hundreds of times but still i cant sync. pls help
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
help i have lost my password to log into itunes and have a new email address but can't change this because i can't login?????
Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings. Be sure to turn it off.
You are confusing an itunes store account with an icloud account. You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/
Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account. (have restrictions turned off) That will disconnect the device from the account but will not delete data in icloud or other devices. Then sign in using the new ID. -
Can you please help me?
Forgot Your Account Password
For Snow Leopard and earlier
Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password.
If you are unable to boot from an installer DVD:
(these will only work on Leopard or earlier)
1. Boot to Safe Mode by restarting and after the chime press and hold down
the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each
command line:
/sbin/fsck -yf
If you do not receive a "Filesystem OK" message then repeat this command
until you do. If after seven tries you still do not receive a "Filesystem OK"
message, then the system is corrupted and needs to be reinstalled.
mount -uw /
cd /private/var/db/netinfo
mv local.nidb local.old
rm ../.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
Reset Admin Password Using The Terminal
You can reset the password by printing out (or writing down) and carefully following these steps.
First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
Now, start in Single-user Mode. It should boot into a command line.
Enter these exact lines. Press RETURN after each.
mount -uw /
ifconfig lo0 up
cd /var/db/netinfo
netinfod -s local
Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
Now, enter:
sync
reboot
and the machine will reboot. The admin password should now be changed.
Another Terminal Method for Snow Leopard
Reboot the computer and hold the COMMAND and S keys down to enter single user mode. (If a lock appears and a password request, there is a firmware password. You have to know it or take it to Apple.)
When the prompt appears type the following command lines pressing RETURN after each:
fsck -fy
If you do not receive a "Filesystem OK" message then repeat this command
until you do. If after seven tries you still do not receive a "Filesystem OK"
message, then the system is corrupted and needs to be reinstalled.
mount -uw /
ls /Users
passwd username
Enter the new password twice. It will not be echoed.
If this works then you will have to make modifications to your Keychain. See:
https://support.apple.com/kb/HT1631
https://support.apple.com/kb/TS1544 -
HT1414 I have forgotten my password, how can I access my backup?
Can anyone help?
OS X 10.7 Lion, 10.8 MountainLion & 10.9 Mavericks
Reset Password using Recovery HD
Boot into Recovery Partition.
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart. -
Please can someone help a total technophobe?!!! I have recently set up a new mail account and since I've done that my wifi button has greyed out. Not sure what happened as I had help from my daughter. She doesn't think that she did anything wrong as has been an iPhone user since day one!! She's at work now so I'm totally lost. Please help. Many thanks.
it's' an issue on 4S..... here same problem, even after restore the firmware.... wifi and bt are lost....
-
I have forgotten my password how do I unlock my iPad without losing al my pictures
I have forgotten my password how do I unlock my iPad without losing all of my pictures
You can't unless you have a backup on your computer or iCloud.. If you have important files on your iPad, you should always make frequent backups.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have forgotten the password to my phone, what do i do?
i have forgotten the password to my phone and i am away, what do i do?
restore it to last backup
if you don't have a last backup then restore it to factory settings
and yes you will lose all photos and sms and data -
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I tried to restore backup from itune to my new iphone 5s but have forgotten the password what should I do?
JennyGEL wrote:
I ... have forgotten the password what should I do?
Which password?
If you mean the passcode to your iPhone, here's the solution:
http://support.apple.com/kb/HT1212
If you mean the encryption password to your backup on your computer:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore. -
The problem is that my iphone isnt connected/synced to iTunes and i've forgotten my password so iTunes isnt connected either so can someone pls help me?
PLEASE HELP MEHi Someonewashere,
In the article you were coming from, there is actually a section regarding what to do if you have never synced to iTunes before:
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Regards,
- Brenden -
I did not sync my iPod Touch with iTunes and I have forgotten my password and now it is locked. I have the recovery mode screen at "conect to iTunes", but iTunes is not recognizing it. How do I unlock it?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have several old email addresses and accounts with itunes where the email is no longer working, and i have forgotten my password, how do i activate the songs
Welcome to the Apple Community.
The following article(s) may help you.
Look up your old and forgotten Apple ID -
I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
My apple id attached to my itunes account has expired and i have forgotten the password that was attached to it! I have created a new apple id but cannot transfer it to my itunes which all my apple products connect up to on my mac with all my pictures etc on!?! HELP!
My apple id attached to my itunes account has expired
They don't expire. As far as anyone knows Apple IDs live on forever - if you forgot its password use https://iforgot.apple.com. Good luck with the answers to whatever security questions it asks.
... I have created a new apple id but cannot transfer it to my itunes which all my apple products connect up to on my mac with all my pictures etc on!?!
Right! That's the reason you do not create a new Apple ID.
As far as Apple is concerned a new Apple ID is a completely different user, with absolutely, positively no access to anything available to any other Apple ID.
Concentrate your efforts on resetting the password to your old Apple ID. It has not expired, and is the only way to use all your existing iTunes purchases, App Store purchases, computer authorizations... etc. Forget about the new Apple ID you just created.
Maybe you are looking for
-
Not able to use sky drive pro for sharepoint 2013
Hi Friends, recently i have updated my sharepoint farm to sharepoint 2013 from sharepoint 2010.. due to some reasons I have not visually upgraded a site to sp2013 visual effects but all other sites have been visually upgraded. now, when I try to sync
-
8 GB RAM for Mac Mini Mid-2011?
I am looking for the correct version to install in my Mac Mini 2011. I found http://www.amazon.com/Crucial-PC3-10600-SODIMM-204-Pin-CT2C4G3S1339M/dp/B008LTBI T4/ is that the correct version that is compatable with my device?
-
Adobe Acrobat 8 crashes when printing!
My client has been experiencing this problem before and a reimage of the computer was needed to keep it from coming back up. It recently came back. I know there has to be an easier way than a complete reroll of the system. She is the only one in the
-
No luck writing .img to USB stick
So I try writing the bloody thing using dd. Read the manual, unmount the thing before writing, using device name and not partition name, the lot. It appears to write the image normally, but upon mounting the partition on the USB stick, it's empty. If
-
Opening .pdf via hyperlink in excel always opens reader full screen
Using excel 2003, I have hyperlink cells that point to files on my local machine, with names like "file.pdf". When I click on these links, excel launches acrobat reader (as expected) but for some reason reader *always* goes Full Screen no matter what