HT1212 i just downloaded ios 7.0.2 on iphone 4 and it is now asking for a pass code which i did not even set up do??
i just downloaded ios 7.0.2 on iphone 4 and it is now asking for a pass code which i did not even set up do??
I have an ipod 5g. i changed my passcode and then got a notification of a 7.0.2 update. i updated and now my passcode wont work? im certain that i entered the right passcode. i would try resetting on my macbook, but the screen is shattered.
Similar Messages
-
help!!!!! i just uploaded 2 days ago the new 7 update to my phone , then yesterday morning , it said disabled and asked me for my pass code . I couldnt remember what it was , so after trying different ones it finally locked me out for good. how do i fix this !!!!!!?????
If your phone is disabled from entering the wrong passcode too many times you'll have to restore it to remove the passcode, as explained here: http://support.apple.com/kb/HT1212.
-
Hello,
I just had the hard drive on my computer replaced, and the Lightroom5.7 and Photoshop cannot be sent over from the outside hard drive without an access code!! Now what do I do? Will Adobe have a record of my Lightroom3 download and my 5.7 upgrade?If you took the time to register your software on the Adobe web site, then you can log on and retrieve your serial numbers.
Find your serial number quickly
You ought to be able to retrieve the serial numbers from your first hard drive ... that requires knowing what your operating system is and if the first hard drive actually is readable.
And if none of that works ... well then I think you're way out of luck.
Might I suggest you adopt a new method of keeping track of your serial numbers, not just for Lightroom but all of your software? I suggest you create a computer text file named serialnumbers.txt, containing all of your serial numbers, stored on your computer and in a cloud backup service (like DropBox which is free) so that you will never lose it. -
Can someone help here?
Updating iOS on your phone would not have any effect on your Mac.
What exactly is the problem? -
I have downloaded the latest iOS and it asks for a pass code which either I cannot recall, two failed attempts,. How do I get one so I can install
The iOS upgrade is seeking whatever code you use to unlock your iOS (iPhone or iPad) device; your device passcode or PIN or password you're using to secure your device.
If you've forgotten the PIN or password that you had originally configured to unlock your iOS device, there is a reset sequence. -
I just downloaded IOS 5 on to my IPHONE 4. When i text people that also have Iphones for Imessage my name is my email. anyone know how to change it?
You have an Apple ID signed in to all the devices which is causing this.
"When you sign in to your Apple ID with iMessage using an iPhone with iOS 6, your Apple ID is linked to your phone number. This allows you to receive iMessages sent to your phone number on other iOS 6 devices signed in to the same Apple ID."
To correct this, go into Settings > Messages > Send and Recieve at > See below...
On your phone: Uncheck your son's phone number
On his phone: Uncheck your phone number.
On iPad: Uncheck both phone numbers to prevent iMessages sent to either number to also appear on the iPad.
If you have email addresses associated here, then you may have to remove those as well, although you won't be able to remove the Apple ID that you're using. Any iMessage sent to that Apple ID will arrive at all the device unless you sign out of that Apple ID and create/use another Apple ID for that device. -
Hi...
I just download IOS 7.1 in my iphon 4s. Now I cannot mute camera sound. Even I was slip down the mute switch. So can u please let me know what I want to do?In some countries, this cannot be overridden.
-
Just downloaded iOS 6. Cannot view maps at street level now. Any solutions?
Just downloaded iOS 6. Cannot view maps at street level now. Any solutions? Apple help told me I cannot delete iOS 6 and go back to 5.1.1
Apple is constantly working on improving their new Maps service, but until it reaches the level of finesse necessary to be usable, take a look at some alternatives.
Bing Maps offers a very good maps service with Bird's Eye, a feature similar to Flyover. It's arguably better than Google Maps.
http://itunes.apple.com/us/app/bing/id345323231?mt=8
You can use Google Maps by creating a shortcut to the Home Screen with help from the article below.
http://www.ign.com/articles/2012/09/20/how-to-get-google-maps-on-ios-6
MapQuest also has a very nice app available.
http://itunes.apple.com/us/app/mapquest/id316126557?mt=8
Nokia Maps is another great service that you can add to your Home Screen via a web shortcut.
http://m.maps.nokia.com
Waze is another very well reviewed app.
https://itunes.apple.com/us/app/waze-social-gps-traffic-gas/id323229106?mt=8
Here's an article detailing how to receive Public Transport directions.
http://www.wired.com/gadgetlab/2012/09/transit-apps-ios6-woes/?pid=3798
If you want a YouTube app, Google has made a very improved version available on the App Store.
http://itunes.apple.com/us/app/youtube/id544007664?mt=8
If you would like to send a suggestion to Apple, please go to http://www.apple.com/feedback or you can Report a Problem via the Maps app by tapping the bottom right. -
My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity. How do I get the window to enter my pass code?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have just bought a brand new Ipad mini and started setting it up. I had updated to os7.4 and after it finshed installing I had to leave it before answering all the set up questions. When I switched it back on it asked me for a pass code which as far as I'm concerned, hasn't been set up yet. Anyone know whats going on!
Hi robertbpage,
Thanks for using Apple Support Communities. If the iPad mini is asking for a password that you do not know, this article has steps you can take:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Ari -
I have loaded ios 7 onto my ipad mini now it is locked it s=asked for a pass code ihave never had a pass code on this device so tried my apple pass word Locked out! itunes says not eligible when i try to re load!!
Hi MaraAndKaid,
This article has steps you can take when you're unable to remember your passcode to get things back on track:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Take care!
- Ari -
My new iPad air is asking for a pass code. I have only just finished restoring it via iTunes from my ipad2 and I didn't set one. The one I used before doesn't work. What can I do?
http://support.apple.com/kb/HT1212
-
I have just went to use my airplay and my airplay is asking for an apple passcode which I didn't set any suggestions
In the Airplay settings section on AppleTV there should be an option to enable/disable Airplay a password - basically used to stop someone hijacking someone else's AppleTV display unless they know the code.
-
Just purchased a new router yesterday since ours got struck by lightning. Now my husband's iphone and my ipad are asking for guest wifi passwords. Don't understand.
Some new routers come with the standard connection as well as a guest account. The guest account can be used for when friends come over and want to use your Wi-Fi connection. You can give them the guest account password and still keep the main account password private. Make sure you are logging on to the main connection and not the guest account.
-
I don't know where to get this Enrollment Code. When I try to log into my iTunes account with my Apple ID, it tells me the Enrollment Code I entered (did not enter anything) is invalid. I don't know if this is something that is required for iTunes U or not. I can view and navigate through courses, but will this keep me from receiving credit for completion? Any insight would help.
You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.
Maybe you are looking for
-
How do I delete my iCloud account from my iPad 2 when I don't know the password to that account?
-
Restrict User Access to Planning Books- Creation of Roles
Hi All I want to restrict the users to access/see only limited number of planning books in SDP94 menu For this, I tried creating a role and assigned authorization C_APO_PB with required planning book values However I am not sure how to create the rol
-
Problem While Uploading Document in Upload Iview
Hi, Whenever am try to upload a document Url iview (Content Magmt --> explorer > Documents>folder->new-->upload)showing the following error " "upload.xls" does not exist, or file is empty; you cannot upload empty files". Whatever file i upl
-
Hi, Our client wants to implement OM, PA, and positive Time Management. They are outsoursing payroll. And they need integration between SAP Time management and 3rd party payroll system. Whatever the payroll process was done from 3rd party that should
-
SSIS packages - Dynamic MODIFYSCRIPT :: SAP BPC 7.0 MS
Hi, I want to know if it is possible to create a Dynamic MODIFYSCRIPT, so if the user selects a RADIOBUTTON option, the next SSIS screen will show or a SELECTINPUT with a specific selected member or a TEXT with a value. The idea is that a paramete