HT1212 i know what to do to a disabled ipod, but the screen has a small crack in the right side and will not allow me to slide the lock or power off button all the way. what now?
i had tape over the crack before, and i was able to use the ipod but i took it off one day because it was getting dirty. i put more on and it wouldnt work so i took it off again. now im not allowed to undisable it because of the crack. its on the right top corner of the screen.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
I have changed my Iphone once last year. My iphone has being playing up for the best part of 6 months. It Keeps deleting all my music of the phone. it freezes and will not allow me to turn it on or off. if i am in the middle of an app it will randomly shut it down and turn the phone off totally (even if it is charged.) It will not charge properly, it has to be in a exact position to charge and even then go's off and on. I thought this my be my charger but the charger works fine on another phone. it will not allow texts to come through properly and sometimes will not not let me ring people it just freezes and i have to turn it off and on a couple of times in order for it to work. it will not let me update apps and the silent button is not silent it still go's of on ringer.The keyboard will freeze up not allowing me to type anything. It wants me to pay £126.44 for it to be repaire when i have nothing to do with why its not working!
That is correct.
That is the price of a replacement iphone once your iphone is outside of the warranty period -
On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
My iPad is frozen with the message not enough storage. Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off. How do I get past that message?
Delete some apps, files, photos, videos, movies, etc to free up some space.
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
during the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?
Follow the instructions here > http://support.apple.com/kb/HT1808
You may need to try a few times to get it to work -
Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video….with no way to edit full format video. Is this statement true? Does iMovie support HD 1080p @ 60 fps?
Iggy826 wrote:
… Is this statement true?
yes and no!
using the intended Import from Camera routines, iM converts automatically in its very own AppleIntermediateCodec. so, answer is yes.
but …
a) Apple claims , aic is non-lossy intermediate codec. working with proRes in FCPX taught me, there are even less non-lossy-ness codecs
b) iM offers an Archive feature, which is basically a simple Finder/copy operation which 'clones' your SDcards content into some folder on your harddrive; e.g. you can later use these untouched 'raws' in another editor such as FCPX. so, answer is no.
c) when you 'override' the import routines by manually re-wrapping mts into a mov container, iM handles the 'native' h264s ... so, answer is no.
d) adding any effect, transition etc. reduces any interlaced source to 540p. (if you're working with 720p source, res is kept) … so, answer is yes. or, in 720p case, no.
< Johnny Depp's voice >… savvy?
Does iMovie support HD 1080p @ 60 fps?
via Import from Camera? No.
via re-wrapped mts>>mov? I was told yes, some say no.
one thing to be kept in mind when talking about these 'issues':
iM, this 12€, is meant as a CONSUMER toy tool.
it supports AVCHD vers1 (=no 1080/60p, no >24Mbps, no 3D).
fingers crossed, we'll see soon some iM/QT/FCPX update for support of AVCHD v2 ........
the main consumer devices are within the specs, iM supports.
using professional equipments makes usage of professional software (FCPX, AP) optional.
sorry for lengthy answer. -
my sons ipod says disabled for 22,807,916 min and will not allow me to restore it. on the computer is says that i have to enter his password but the slid to unlock is not even of the screen, HELP!!!!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I attempted to update my iphone5 to 7.1.1 There was an error and now my phone is erased. I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also, do you remember what the error message said? -
My Ipod 4th generation is almost unresponsive to my touch, and will not allow lockscreen access, and also is stuck on the "Not enough Storage" button. When I try to get rid of it, it does nothing. My ipod's power button, volume buttons, and home screen button all work, and I can still use my start/stop headphones to listen to music.How do I fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?
hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I've signed up for a subscription to acrobat pro and successfully download 2 days ago. Now when I try to open pdf it asks if I want to sign up again and will not allow me to open the document. Can anyone give me assistance?
Hi Mbs@adobe,
It sounds to me like you're trying to open a PDF via one of the Acrobat online services, not via Acrobat. Did you install the file that you downloaded after you signed up? Once you do, Acrobat will be installed on your computer, and you can run it locally (you don't access an Acrobat Pro subscription via the web--it works just like a version of Acrobat that you might purchase from the Adobe Store, or a large retailer).
Then, you'll open the Acrobat application from your desktop and choose File > Open to open your PDF file.
Please let us know how it goes.
Best,
Sara -
My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS -
my phone keep asking me to sign in to iTunes store and will not allow me to download apps. it sends a message saying "Cannot connect to itunes store" what do i do?
Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it. So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID). If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections. -
my phone just turned off and will not go back on. my top lock button has been broken for over a year. Help! I have tried plugging it into wall unit and computer but my home button just doesnt do anything!
It seems that year long delay from having your lock button repaired has finally caught up to you. Sounds like you have some damage to your phone that requires repair/replacement. Take it to a Apple store or contact Apple Tech Support.
-
Wanted to load an app onto my wife's ipad. BUT, the program keeps saying I've already purchsaed it and will not let me purchase again. I've tried everything I can think of. Now looking at wiping ipad competely and starting over but not sure that'll help. Between the time I purchased the app and now, I had to change password's w/Apple (Stupid system in the first place IMO) and it doesn;t liek new password
I can find the app, but the free version only. I paid for the upgrade ($1.99) on my ipad and now I want to add it (or buuy it) for my wife's ipda, but it will not allow me
Maybe you are looking for
-
How do I print a list of the files on a CD?
I like to keep mini printouts of the contents of CD's. In OS 9 I was able to do this.. I can't seem to figure it out in OS X..any ideas?
-
Windows 8, PS7 upgrades to CS5, LR3
I just purchased new Laptop with Windows 8. I have PS7 that upgraded to CS3, CS4 and CS5. Will this be uploadable to Windows 8? I also own LR3 - same question. Thank you
-
I try to use the examples from the AQ-api guide. I did all the presample things and the program seems to work well untill the createAQSession is called. Ie I got a databaseconnection, I can register the AQ-driver, I can use the getDrivers etc. code:
-
Using adf/bc with jdev 10.1.3.3. I've created a custom validation rule class according to the instructions in the adf guide. In that class, I've defined just one property, along with its getters/setters. I've registered my rule in the business compon
-
Why does yahoo mail keep freezing?
I am using Safari and yahoo mail, I can browse ok but when I try and check my emails yahoo mail keeps freezing on me?