HT1212 I pod pass code will not open ipod, plus the iopd is in voice mode and it dose not seem to be responding to my voice commands so saying the pass code or trying to type it in will not work to open my ipod , HELP Please
How would one open an ipod if voice command is on but not responding? and the ipod has a opening page creen lock on as well.
I think you have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
Similar Messages
-
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Hi,
My ICloud was hacked. So I updated my password and now have my Iphone and the Icloud online email working. Yet the email set up on my Macbook Pro still will not work and I ran through the troubleshooting. It has ICloud IMAP. Can someone please help me with this?
Thank you.First, a caution: Do not retry passwords. Trying random passwords or wrong passwords more than (usually) twice, and that'll usually trip evasion, and you'll get blocked even with the right passwords. If you've retried random passwords, you'll have to let things "cool off" for a while, and try again later.
Open up the details drawer in the Mail.app Connection Doctor troubleshooting, and re-run the connection tests. Expurgate anything sensitive from the diagnostics, and post the iCloud-related errors here.
Alternatively, remove the iCloud account from the accounts listed within Mail.app. Re-add it. See if that clears the issue.
Alternatively and if the other options here fail, contact Apple iCloud support directly and request assistance. -
Select and Count not working.....HELP PLEASE!!
I have the following scenerio:
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//brings back count of 1 which is right...only one part within the date range
PCOUNT: 1
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AC043208%' OR #PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//looped through result set and these two counts are right
PCOUNT: 1
PCOUNT: 1
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' OR #PART LIKE 'AC043208%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//now brings back a pcount of 2 for the first part which is shouldn't, there are two parts with the same number but only one which falls within the date range.
PCOUNT: 2
PCOUNT: 1
could anyone help me with this.....thanks in advanceFound the solution....its in the order of processing of the select statement...for others future reference....
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//brings back count of 1 which is right...only one part within the date range
PCOUNT: 1
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AC043208%' OR #PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//looped through result set and these two counts are right
PCOUNT: 1
PCOUNT: 1
//*****this works because in actual fact it is reading the date range and it associates it with the last part number so it reads it like this (note the brackets):
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AC043208%' OR (#PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826) GROUP BY #PART,#PDESC
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' OR #PART LIKE 'AC043208%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//now brings back a pcount of 2 for the first part which is shouldn't, there are two parts with the same number but only one which falls within the date range.
PCOUNT: 2
PCOUNT: 1
//***this did not work because the date range only applied to the last part number not the first..so it read it like (note the brackets):
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' OR (#PART LIKE 'AC043208%' AND #RECDT BETWEEN 19970826 AND 20020826) GROUP BY #PART,#PDESC
//**Therefore, I changed it to (including the brackets) and it ran fine:
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE (#PART LIKE 'AN101011%' OR #PART LIKE 'AC043208%') AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC -
Hi,
I uploaded my page from Dreamweaver yesterday and it works fine in Firefox and Safari, but when i opened it on Internet explorer, the bottom tables have moved and the image links at the top have a white boarder around.
Webpage link: http://www.gs-designproject.co.uk/home.html
any help greatly appreciated.
Thanks,
GavThe white borders around your images are created because they're embedded in links. Add the following to your style sheet:
a img {
border: none;
The problem with the table row at the bottom is this:
<td colspan="760px" height="40" valign"middle"="">
The colspan attribute takes the number of columns that you're spanning, not a number of pixels. Judging from the rest of the table, it should be colspan="7". -
Sound not working in Flash Builder. Help please.
So, here's my situation. I keep trying to put an mp3 in Flash Builder to try and make sounds happen, but each time I do it only plays the beginning of it and stops midway through. My music is working at 44100 Hz with a 32 bit rate (tried changing it to 16, but Audition won't let me). Here's my code.
package
import flash.display.Sprite;
import flash.events.Event;
import flash.events.KeyboardEvent;
import flash.media.Sound;
import flash.media.SoundChannel;
import flash.ui.Keyboard;
[SWF(width = "550", height = "400",
backgroundColor = "#FFFFFF", frameRate = "60")]
public class SoundThing extends Sprite
[Embed(source="../sounds/try1.mp3")]
private var Try:Class;
private var _try:Sound = new Try();
private var _tryChannel:SoundChannel = new SoundChannel();
public function SoundThing()
stage.addEventListener
(KeyboardEvent.KEY_DOWN, keyDownHandler);
public function keyDownHandler(event:KeyboardEvent): void
if (event.keyCode == Keyboard.SPACE)
_tryChannel = _try.play();
I'm not sure what the issue is. Please help me. Thank you!I would say that either the OP needs two tabs somewhere to make his headings and line items align,Exactly what I was thinking. As this sample code illustrates, the b will not line up under Column#2. Perhpas OP needs to use a Formatter or the printf method instead.
StringBuffer sb = new StringBuffer();
sb.append("Column#1");
sb.append("\tColumn#2\n");
sb.append("a");
sb.append("\t");
sb.append("b");
System.out.println(sb); -
This thing is not working!! i need help please!!!
i picked up a ipod nano today figureing that its a pretty good mp3 player for my needs... i get home turn the thing on mess with it for a few mins turn it off plug it in to charge and it still turns on and off so im figureing okay cool ill install my drivers and itunes and start building my playlist well the first issue i get is itunes will not start up it just flat out refuses... to start up i have no idea why the updater worked fine for what i installed off the disk which told me everything was up to date as always i went to apple.com the website to make sure drivers arethe correct ones found out they are not...GREAT!!!.. so i delete the old drivers and install the new ones then i go to update my ipod nano and it says "sorry device notfound" mean while my ipods frozen giveing me the no disconnect symbol it wont even disconnect when i turn off the usb device then it gave me the battery charge warning light then turned right off after freaking out. i then spent a little while redoing my itunes and ipod updaters to where there is no application issues. i kept checking my ipod to see if it was chargeing theres no indicator whats so ever when the ipod nano is turned off of it getting charged like my moms old ipod 20 gig and shes had that thing forever without any issues at all. meanwhile my ipod is a metal electronic light paper weight right now.. if this thing doesn't work when i get up in the afternoon tomorrow form it being connected to a AC adapter like apple says it should work im takeing it back and gonna drop the extra 100 on the 30gig that i know shouldn't have any issues... cause **** this *****!!!
if any of you can tell me how to get my ipod nano to turn on that would be great let alone how i can get it to update and then export songs to the thingHi,
Welcome to Apple Discussions
the
first issue i get is itunes will not start up it just
flat out refuses... to start up i have no idea why
You might want to ask for help in the iTunes for Windows Forum
the updater worked fine for what i installed off the
disk which told me everything was up to date as
always i went to apple.com the website to make sure
drivers arethe correct ones found out they are
not...GREAT!!!.. so i delete the old drivers and
install the new ones
Sorry, I'm on a Mac so I'm not sure what "drivers" you are referring to.
You need iTunes and the latest version is 6.0.2.
You also want the version 1.1 software for the nano.
Both are available for free from www.apple.com
then i go to update my ipod nano
and it says "sorry device notfound" mean while my
ipods frozen giveing me the no disconnect symbol it
wont even disconnect when i turn off the usb device
then it gave me the battery charge warning light then
turned right off after freaking out.
Here is a link that may help with the above:
Symptom
One or more of the following occurs:
iPod does not show up in iTunes or as disk in Windows Explorer
iPod does not show up as disk in Windows Explorer (even though disk mode is enabled on the iPod)
iTunes and Windows Explorer report the wrong amount of available space on iPod
No songs appear on the iPod after an apparently successful update from iTunes
Music copied to mapped network drive instead of iPod
Then read this link:
Strange iPod behavior when Windows confuses iPod with network drive
There's also this:
Your Windows PC doesn't recognize iPod
i then spent a
little while redoing my itunes and ipod updaters to
where there is no application issues. i kept checking
my ipod to see if it was chargeing theres no
indicator whats so ever when the ipod nano is turned
off of it getting charged like my moms old ipod 20
gig and shes had that thing forever without any
issues at all.
If the nano is charging when it is turned on there is a small icon in the top right of the screen. If it is turned off the icon is large and uses all the screen.
iPod: About the battery charge status icon
Another link (sorry to give you so much reading to do):
iPod's battery doesn't charge
meanwhile my ipod is a metal
electronic light paper weight right now.. if this
thing doesn't work when i get up in the afternoon
tomorrow form it being connected to a AC adapter like
apple says it should work im takeing it back and
gonna drop the extra 100 on the 30gig that i know
shouldn't have any issues... cause **** this
if any of you can tell me how to get my ipod nano to
turn on that would be great let alone how i can get
it to update and then export songs to the thing
Hope some of those help.
Regards,
Colin R. -
3rd gen not working in car!! Help please!!!
Evening people,
I'm looking for some help with linking my 3rd gen ipod to my modular car stereo system in a Mazda MX 5 02 reg. I've purchased a lead to link it to the stereo...works fine with an ipod mini but is supposed to work with all ipods. Basically it advances tracks and fast forwards by using the controls on the existing car stereo.....like I say it works fine with the mini but when I fit the bigger version in, it'll only play through the speakers but won't advance. Any ideas? Trying to avoid the hassle of selling the ipod for a newer version......could it be that the mini doesn't have the 4 control buttons like the 30GB one?
I'm confused!!! Please help as it's driving me insane.Hi,
I mentioned the Field length as 10 in XSD.
And in syndicator if the text in the field is 30 in length, the output xml generates with 30 charecters...
So by this i can conclude that, it is not chopping as per rules in XSD.
Also i have fields of types such as String -Integer -Decimals in the XSD.
But when i load that XSD into MDM, i can see in syndicator that all the fields are of type Text (automatically..)..
So the Field type that you specify in the XSD is not shown/Active Once that xsd is loaded into MDM.
Does anyone disagree with this statement.
Note: I am aware that we can restrict the field length by mentioning the Field length in Console table-Field properties.
Also in the Syndication map -> Destination items -> Max Item Length..
What i am checking is, isit worth to add these Field lengths/Field types/Restrictions in xsd?
Kind Regards
Eva -
Airport not working after Apple sw updates - HELP PLEASE!!!
I have a newish MAC Intel. The Airport was working fine for the last 9 months or so until I puled down Apples usual sw updates. I did them all incl the firmware update. Now the Airport wont hook up. I have wireless to NETGEAR router downstairs. I see network broadcasting as its sen in networks box, yet when I select it and then plug in a WEP and connect it says no can do and jumps back to no network selected. Ive tried this dzens and dozens of times. Lke I said was fine for last 9 months until updates last week...grrrhh.can anyon help me please?
thanks
./david
PS ot sure what OS I have..never checked to be honest
INTEL iMAC Mac OS X (10.4.8)Hi David,
sunny in Scotland right now ?? (Sorry, just joking)
Have the same one and came to the conclusion that Airport doesn't wait for the DHCP from the Netgear to get a numer like 192.168.xxx.xxx but has already one which is not in the pool provided by the Netgear.
Since I'm depending on this I help myself by turning Airport off (in the Menu) wait 20 seconds and then turn it on again.
Helps every time.
Another guy round here has helped himself by turning off the Automatic (in the Airport preferences) and has entered all numbers manually.
Regards
Stefan -
Adobe Flash Player (AFP) not working on some websites. Help please?
I am trying to view some websites, but the area turns gray where the interactivity is (where Flash Player is needed). I uninstalled everything related to AFP, then went to the sites so they could direct me to install. I installed (I hope) the most recent version of Flash, went back to the sites with no luck. Can someone please help me? Your assistance is appreciated. Thank you.
Flash Player Help | Installation problems | Mac OS
Flash Player Help | Installation problems | Flash Player | Windows
Mylenium -
Samsung ML-2010 not working with 10.5.8 - HELP PLEASE
Howdy,
I know that there are others having this problem. Any advice would be greatly appreciated.
I have been using a Samsung ML-2010 with Tiger (on my MacBook) and on Leopard (on my iMac) and all has been working great. Have recently caught up with all of my software and security updates on my iMac and now the printer isn't working on 10.5.8. Although fine on Tiger. I've installed (and reinstalled) the drivers from Samsung, have followed a few tips from a previous post and still nothing. It comes up as 'stopped' in the job list.
Any ideas??
BTW- I emailed Samsung and they said I need to contact Apple...!Howdy,
I know that there are others having this problem. Any advice would be greatly appreciated.
I have been using a Samsung ML-2010 with Tiger (on my MacBook) and on Leopard (on my iMac) and all has been working great. Have recently caught up with all of my software and security updates on my iMac and now the printer isn't working on 10.5.8. Although fine on Tiger. I've installed (and reinstalled) the drivers from Samsung, have followed a few tips from a previous post and still nothing. It comes up as 'stopped' in the job list.
Any ideas??
BTW- I emailed Samsung and they said I need to contact Apple...! -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards. -
I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???
The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.) -
I have a brand new i phone 4s and i have updated the soft ware to the 5.1 and tried to restore it to download my old contacts and apps etc. and my computer now wont recognise my phone and itunes will not do anything can any body help please???? i need this sorting asap xxxxxxx
see if this link helps http://support.apple.com/kb/TS1538
-
I've just edited all my apple id information and my iMessage will not work at all, can anyone help?
Try tapping Settings > FaceTime, turning FaceTime Off, editing the Apple ID associated with FaceTime, and then turning it back on.
If that doesn't do it, take a look at this Apple doc -> iOS: Troubleshooting FaceTime and iMessage activation -
I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........
This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.
Maybe you are looking for
-
Problem in importing an own image
I am new to Mapbuilder. I need to use my own images as themes in my project. when I try to import a bmp or "gif" file by choosing Tools--> Import Image Option using MapBuilder, i am getting the error message "GeoRaster spatial extent update was not s
-
I posted this question on Twitter last week, was asked to check the settings for rendering and this didn't make a difference. I then installed Adobe Acrobat Pro to see if this made a difference but no luck. Finally I was asked to print in B&W but aga
-
What's the best Java Editor?
Right now I'm using JCreator. I've tried JBuilder, but it keeps crashing on my machine and it runs damn slow... Is there a better editor out there that shows your errors clearer and stuff?
-
LR3 smart collection not updating
I shoot for a college and I have smart collection setup to show me my best shots for each sport. There are some images that won't appear in my smart collection and I can't figure out why. All the other sports collection work fine. This collection doe
-
I am getting this message from Facebook. The only reason I can see that this happens is because your address may be located in Texas. Any advice??