HT1212 ipad doesnt start in recovery mode

My ipad is locked can not start it in recovery mode, I tried power off, then press home and hold and then started power it says to connect to itunes but not in recovery mode. when i connect to pc itunes give message unable to connect to itunes due to passcode

My ipad is locked can not start it in recovery mode, I tried power off, then press home and hold and then started power it says to connect to itunes but not in recovery mode. when i connect to pc itunes give message unable to connect to itunes due to passcode

Similar Messages

  • HT4061 my ipad air is in recovery mode and it is not starting.I pressed the main key when connected to my computer but there was no response

    My ipad has gone in recovery mode when I tried to upgrade my system software.it showed a loading bar and then turned off and never started.i tried to turn it on by pressing the home key and start button simultaneously but there was no response.i even connected it to the  itunes but there was no response by the ipad

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • My ipad 2 is in recovery mode, but I can't reset it by using the home and start keys.  Is there another troubleshooting that I can do?

    My ipad 2 is in recovery mode, but I can't reset it by using the home and start keys.  Is there another troubleshooting that I can do?

    read this carefully
    If you can't update or restore you iOS device
    http://support.apple.com/kb/HT1808
    word is you may need to do it multiple times, and be sure to follow all the steps carefully

  • HT1414 my ipad 2 is in recovery mode but when i start up itunes and press restore itunes stops working and the window closes, what should i do?

    my ipad 2 is in recovery mode when i plug it into itunes and my comuter to restore it itunes stops working and the window close, what should i do i really need my ipad if anyone knows how to fix it i would really apreciate the help.

    I assume that you mean that the iTunes window closes. Quit iTunes, reboot your PC and try again. The iTunes software might be corrupt and it may require reinstalling iTunes on your computer.

  • The iPad stick in the recovery mode

    Hello
    My iPad stick in the recovery mode, so when i connect it to the PC to restore it, it's keep restarting and the iTunes doesn't start
    I don't know what to do, It drive me to madness
    Hope anyone can help me :'(

    I did that already, start iTunes than plug the iPad,
    But when it's connected it keeps rebooting.
    and itunes show me this msg "itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with itunes."
    and at the moment when i click on Ok it disappear from itunes and still keeping rebooting.
    And all this process repeat again like i'm in an infinite loop.
    Thank you.

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?

    My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?
    please help!

    See: http://support.apple.com/kb/HT1808 to restore the phone using Recovery Mode. You will lose all content on the phone. This is the only way to bypass the lock screen if you don't have the last computer the phone was synced to.

  • My iPad is stuck in recovery mode.  I already downloaded Snow Leopard and am making no progress.  Help!

    My iPad is stuck in recovery mode.  It was suggested before that I upgrade my computer, so I downloaded Snow Leopard and have tried resetting it, but it still isn't working.  What can I try next?

    FORCE IPAD INTO RECOVERY MODE
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...

  • HT1414 My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on its own? There is a lot of data I want to save

    My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • A505 doesnt start from sleep mode

    My laptop sometimes doesnt start from sleep mode. Everything is flashing but display is black. after reset with power button starting ok.
    Do you have some idea?
    Thanks
    A505-S6033, Windows 7

    I have some problem, but sometime my A505-S6035 when restore from sleep mode LED indicators haven't highlight and brightness of screen is not control by anyway. Can anybody help?
    A505-S6035, Windows 7 Professional

  • My iPad is stuck in recovery mode, and wont stay turned off in order to use redsnow.

          Alright so my iPad is stuck in recovery mode. I did some research and arrived at redsnow to fix the problem. In order to use redsnow's recovery fix option I have to power down my iPad. When I hold the sleep button though, no "slide to power off" appears, the screen just goes black then reboots into recovery mode 3 or 4 seconds later. Restarting it via holding the sleep and home buttons doesn't do anything. How do I get it to stay powered down? Any advice would be greatly appreciated.

    I believe I may have used the wrong terminology. My iPad screen looks identical to the picture shown in the link, which is what I reffered to as Recovery Mode. I was looking for a way to return to normal functionality, without having to restore my iPad. I have never backed up this iPad and would prefer not to lose any information on it. If this is impossible then I will just restore it and carry on.
    My main issue with restoring it is that I don't want to lose the pictures on it. If the restore doesn't erase the pictures, then I apologize for wasting your time and will be restoring it immediatly. However if I will lose the pictures than I'd prefer any other method of exiting this screen.

  • My ipad mini is in recovery  mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......

    my ipad mini is in recovery  mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • Our iPad is stuck in recovery mode after attempting to update.

    Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.

    It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
    Reiboot isn't even working. considering trying DFU mode. no idea if that will even help.

  • Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

    Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

Maybe you are looking for

  • Reports Integration Bean -- Cookie Expires Unexpectedly

    After successfully using the bean described in the Oracle Forms Services – Secure Web.Show_Document() calls to Oracle Reports white paper for a while, I've noticed a potential problem. Suppose I do the following: 1. Start up my browser, log in to my

  • Aironet 1100 Default Username and Password not working

    I have a Cisco Aironet 1100 series access point (AP1120B) that after resetting to factory defaults the default username and password (Cisco and Cisco) aren't working in the web GUI.  I am able to telnet to the AP's IP and log in with Cisco and Cisco

  • IOS 8.1.2 car bluetooth connection

    I have lost the Bluetooth connectivity in my 2014 Hyundai Santa Fe since I updated my phone to iOS 8.1.2.  I have tried to reset car Bluetooth features as well as on my phone.  Nothing seems to work.  Is anyone else having issues and are there any so

  • Oracle Forms application is not loading

    Hello all, We have an internal forms application deployed on Oracle Application Server 10.1.2.3 It was working fine till I applied an oracle patch 8374931 today. After patch application our forms application refuses to load. I get the following error

  • How to make "no delivery receipts" the default?

    Is there a setting to disable the delivery receipt for all files you send? Instead of having to go to each file in the "Sent Files" list and manually uncheck the "Notify when recipients viewed" box? Currently, in SendNow, you can set that option befo