HT1212 iPad still locked with password even after erasing the device, please help!
My iPad was locked because I forgot my password; I followed the step by step instructions to recover my iPad but it still asks me for a password to access the device even though the device should have been erased. Please help!?!
Is this how you do it?
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost
Similar Messages
-
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not working, please help me...
If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
B-rock -
I have a iPad air how do I restart or reboot the device please
I have an iPad air how do I restart or reboot the device please?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Fire fox will not save any passwords even after checking the save passwords box
I don't know how else to say it, the save password does not work even after checking the save password box if I can't get it fixed I'll use some one else
Go to Tools | Options and choose the Security tab from the Options dialog. Check the "Remember passwords for sites" checkbox. Click the Exceptions button to make sure the site you want to remember is not listed.
From that point on, Firefox will record the username and password combination you enter for a site provided it can recognized those fields in the website form. If the username and password are not already recorded for that site, a bar will expand down at the top of the webpage below the page tabs asking you if you want to remember or ignore that new information. Clicking the Remember button will record that information for that site. When you visit that same form again, either the single recorded username and password should automatically appear in the form fields, or a drop-down list of choices will appear when you set the focus to that field. The choices can be filtered by typing the first letters.
If the "Save password" checkbox you mentioned is displayed on the webpage, it is not a part of Firefox and is a function of the webpage of that site, so it does not affect the ability of Firefox to remember usernames and passwords for a particular site. -
My Ipad does not go off again, even after pressing the off button and re set, what can I do to switch the I pad off.
Try a reset a few more times.
Hold the Sleep and Home button down until you see the Apple logo.
Data will not be affected. -
Fields are still in EDIT mode even after Saving the Transaction in UI
Hello Experts ,
We are facing one problem in UI .
We have added the BLOCK " Subject" in Complaint transaction ( BT120H_CPL) .
We are able to fill the data in the fields for subject block like " Code, Code Gruppe etc, but even after saving the transaction these fields are in Edit mode .
Can anyone give some pointers/solution to this ?
Regards
VBHello,
if the fields are in Edit mode or closed is controlled by the attribute VIEW_GROUP_CONTEXT of the controller class (*IMPL).
There are also methods to change this VIEW_GROUP_CONTEXT depending on the requirement like "DISABLE_VIEW_GROUP_CONTEXT".
But as i understood you correctly you do not have a own developed view but a SAP standard view. In this case i would create a OSS-Message for the issue.
But feel free to do some debugging on this VIEW_GROUP_CONTEXT.
Best regards
Manfred -
IPad still locked with passcode after restoring from computer
I set a restrictive passcode on my iPad, bought an iPad 2 and moved my content from iTunes to the new iPad. Now I can't access the passcode restrictions to cancel the passcode. I have already tried a full restore from my computer/iTunes. Is there a way to clear the passcode through a "backdoor"?
You can unlock it on another computer though the content will be wiped and I think that you need to put it into DFU mode first e.g. post https://discussions.apple.com/message/15385719#15385719 in thread https://discussions.apple.com/message/15385641#15385641
From http://support.apple.com/kb/HT1212 :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
I did an IOS update and now my iPad is stuck in recovery mode and I can't get it out. I have tried to restore through iTunes, but after restore it says it is still in recovery mode. Please help!
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
PLEASE I NEED HELP QWICK !!!
my ipod was really slow so i restart the settings usually it returns normal with all my songs and apps and picture but now it return to the beggining setting like the first day when i got it, i do the language country everything wi-fi and i want to restire it from my itunes save it says connect to itunes i put it on my computer itunes appear and it synchronise with my ipod normally but the set up doesnt disappear heaven if i do the synchro and all ... i dont know what to do ... please help meThere is a backup plan after doing the Restore. Read this.
-
please help i am going off my mind since i updated my iphone 4 when i go to sync it tells me it can not be used as it requires 10.6.3 or higher
my mac is running on 10.6.8 and i upgraded my itunes to 10.5 everything seems to be in place but the phone is not even being recognised in
devices although it does come up in iphoto if anybody can help i would be very grateful.You have answered your own question:
"requires 10.6.3 or higher"
" i upgraded my itunes to 10.5 "
You need itunes 10.6.3 or later. -
Help me. I did not use my ipad for about a month.Now that I turned it on after trying to charge it for many hours, it just would not turn on, just a black screen with sometimes an apple logo blinking, brought it to repair shops, said they could not fix it, please help
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
Not all loops appear in loop browser... even after I reindex. Please help.
I've just spent the past couple of hours trying to reindex my loops so that they all show in the browser... to no avail. Which is to say, they will show, if you know how to find them. Let me explain:
I have Jam Pack Promos 2, 3, and 4. These loops begin with following prefixes respectively: "2- ", "3- ", and "SO".
If I select "Show All" in the Loops Browser, it does not show any of the loops that I have mentioned. However, if I search in the keyword search bar with any of the prefixes, it will show me these loops.
Now, I have already turned OFF the keyword browsing option in preferences. I've reindexed innumerable times. I don't know what else to do.
If anyone can help, I would appreciate it.
Finally, thank you, Apple, for a great (and affordable) product. Just one request for the next time around: please locate the loops in one directory on my hard drive... and not four!http://discussions.apple.com/thread.jspa?threadID=787415
I experienced this same issue trying to help another user. I had never launched GarageBand on my new MacBook Pro which came with it preloaded. I used the "delete the indexes and re-add them" method but at first glance it appears nothing is there. I misunderstood the GarageBand interface because I selected show all from the loop choices yet nothing appeared. It turns out the buttons with loops became available but still none were selected. By selecting a button like "All Drums" or "Rock/Blues" I could then see all the loops in those genres. By clicking the view selector at the lower left and changing to column view it gave another way to find them by Finder structure too. Hope that helps! -
HT201342 my iphone is lock with icloud i want to open it please help me?
بلدي 5S IPHON هي قفل بعد البرنامج يمكنك مساعدتي لفتحه من فضلك؟
If you have just purchased the iPhone second hand and it is asking for the password to an Apple id that is not yours ,then the iPhone is locked to the original owner and only they can release it
You will have to contact them
Read this carefully it explains why you cannot use the iPhone
Find My iPhone Activation Lock - Apple Support -
Issues with game center after updating Ipod! Please help
After updating my daughters Ipod touch it wouldn't let us login to her game center account. Is there a way to look up her apple id for game center just by her game center name and nickname? When we login with her email address she had to create a new nickname and everything however we have previous emails from friend requests. Can anyone help us? I don't know what else to do she doesn't want to loose all the games that she has been playing for months. It's weird how it says her email is a new apple id when that is what she used before to create her game center account. All help appreciated. Thanks.
Try holding down the sleep/wake and home button until iPhone shuts off. Then hold down the home button while plugging into your computer. Your iphone is now in recovery mode. iTunes will detect this, and you can attempt to restore/update from there.
Best of luck.
Maybe you are looking for
-
Where can I get a replacement drive for my Macbook 2007?
My hard disk on my 2007 Macbook died. Where can I get a replacement? Any ideas on third party?
-
Data Guard Broker - Complete/Immediate Failover ???
Dear Experts, I have been reading about Data Guard Broker from Oracle Doc's (10.2). I came across two terms: Immediate Failover and Complete Failover. I understood from the doc's what each one of them does but unable to understand how to trigger them
-
Setting Application Specific Classpaths
Good afternoon, I am trying to figure out a way to set classpaths to application specific jar files with several other applications running on the same JVM. Is there a way to do this within the main configuration files? Thanks, Gary
-
What is causing the gap between the header and the sidebar1 and maincontent and the footer on the below site? It only appears in Firefox. I have this gap in every site I do using the Adobe Templates. www.mcgahanranch.com
-
Holap cube reporting on obiee???
is it possible to perform obiee reporting on an holap cube created in essbase using EIS... In my holap cube cube i have a dimension market. its sub levels are country --> city --> store... upto the city level data is stored in the essbase cube. where