HT1212 It says ipod touch recovery mode server cannot be contacted

Guys if you have tip can you just reply i really really need my ipod recovery **** its been 1month still haven't recover my ipod touch passlock

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Similar Messages

  • After itunes finishes restoring my ipod touch 8gb, itunes still says itunes has detected an ipod touch recovery mode. You must restore it before using it with itunes. and i dont knwo what to do

    after itunes finishes restoring my ipod touch 8gb, itunes still says itunes has detected an ipod touch recovery mode. You must restore it before using it with itunes. and i dont know what to do

    Are you sure it is 1043? I've never seen that error before. But you can try disabling your security software, connecting the phone to a USB port directly on the computer (not a hub), and trying to restore again.

  • HT1414 ipod touch wont charge and wont tuurn on. when i plug it into itunes it says ipod in recovery mode but error 1600 occurs and cant restore

    have only had my ipod since march and have followed all instructions on the support page but nothing is working please help

    This forum is for those using iPads in large organizations. I'd suggest you ask for help, providing full details about your setup, in the iPod touch forum:
    https://discussions.apple.com/community/ipod/ipod_touch
    Regards.

  • New ipod touch recovery mode

    I just connected my new iPod but I cant do anything because it says that it is in recovery mode and I am not sure what to do.

    Try RecBoot to get it out of recovery mode. If that does not work, just go restore it.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Ipod Touch Recovery Mode Loop - Error Code 14

    I attempted to update my Ipod Touch (3rd Gen 32 GB) to the latest firmware (IOS 5 i think). It froze during the process and has since been stuck in a Recovery Mode loop. I have followed all recommendations on their website, called Apple support and re-installed all Apple related software, and even been to the Genius Bar in our local Apple shop, and it still broken!! They said that as it was out of Warranty (six months) and had a 'Hardware fault' i could buy a replacement for £120. I tried to argue with the shop staff and higher level customer support staff on the phone that my Ipod was working just fine before attempting to update the firmware so how could it be a hardware fault??
    Is it just me or the fact that as soon as the one year warranty is up, Apple expect you to replace your faulty item with a new one. So much for good quality goods, can we expect Apple products to last just over a year and then be expected to buy a replacement!!
    Isn't the fact that i have been offered a new Ipod Touch 32GB for only £120 pounds an admission that the product has some fault issues??
    Anyone else in this position?
    Any ideas how to fix the problem?
    Anyone else disappointed with Apple Customer Support?

    From the article cited at the end of my post:
    Error 6: All of the steps in this article apply to resolve this issue. Following iTunes for Windows: Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
    http://support.apple.com/kb/TS1275

  • Security Vulnerability in iPhone 3GS/iPod Touch Recovery Mode

    Part of the appeal of the iPhone 3GS and related 2009 iPod Touch models is the built in hardware encryption, but a well-publiced attack (http://www.youtube.com/watch?v=kHdNoKIZUCw) by iPhone Forensics specialist Jonathan Zdziarski means that the encryption can be circumvented by putting the device into Recovery Mode, as there can allow the installation of a custom kernel WITHOUT authentication (Passcode or equivalent) being invoked (http://www.schneier.com/blog/archives/2009/07/iphone_encrypti.html#c386843).
    There is a rumour that a fix for this missing authentication was included in the iPhoneOS 3.0.1 "SMS" patch, but I can find no documentation that it was included in that patch, nor any other statement as to whether this has been resolved.
    I am working with clients who would be interested in replacing aging PocketPC based PDAs with a mix of iPhones and iPod Touches, but would not be interested in buying a platform with such an egregious security design issue unresolved.
    Any further information would be welcome.
    Thanks!
    Bill

    Part of the appeal of the iPhone 3GS and related 2009 iPod Touch models is the built in hardware encryption, but a well-publiced attack (http://www.youtube.com/watch?v=kHdNoKIZUCw) by iPhone Forensics specialist Jonathan Zdziarski means that the encryption can be circumvented by putting the device into Recovery Mode, as there can allow the installation of a custom kernel WITHOUT authentication (Passcode or equivalent) being invoked (http://www.schneier.com/blog/archives/2009/07/iphone_encrypti.html#c386843).
    There is a rumour that a fix for this missing authentication was included in the iPhoneOS 3.0.1 "SMS" patch, but I can find no documentation that it was included in that patch, nor any other statement as to whether this has been resolved.
    It was fixed in 3.1
    <http://support.apple.com/kb/HT3860>
    "A heap buffer overflow exists in Recovery Mode command parsing. This may allow another person with physical access to the device to bypass the passcode, and access the user's data. This update addresses the issue through improved bounds checking."

  • IPod Touch Recovery Mode "Waiting for iPod..." popout sign

    Well, I just found out how to do a restore for my iPod touch. Thanks to Ingo2711. But now I have a bigger problem. I get as far as the "waiting for ipod" popout on itunes. On my ipod touch there is a apple logo and an empty loading bar. I've waited over 20 minutes or so and there's still no sign of anything in the loading bar. Can anyone help please? I've tried doing this 5 times and I always get stuck on the "waiting for ipod" popout.. Thanks in advance..

    i have the exact same problem. i've been trying many different methods to get it to work and i even tried it on two other computers. it always does the same thing. i need help. -.-

  • HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

    I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

    Fixed it!
    1. Made sure itunes software was up to date
    2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
    3. Connected to itunes
    4. Pressed restore and update ipod
    Update successful and ipod taken out of recovery mode

  • Got the ipod in recovery mode and hooked into the computer to restore it, now says software server cannot be contacted. done restarted computer and getting the same message, what do i do now?

    have an iphod touch in recovery mode and hooked into the computer to restore it, because the kids forgot password and locked it up.now say software server cannot be contacted what do i do now?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • HT4623 I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with

    I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note:
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • When i plug in my ipod , it says it has found an ipod in recovery mode and that i need to restore it , when i click restore error 3194 shows up . what should i do ?!

    When i plug in my ipod touch, itunes says that it has found an ipod in recovery mode and that i need to restore it in order to use it. But when i click restore, a pop up comes up saying that it could not be restored because of error 3194. What should i do ? and sometimes error 21 or 20 show up, and the ipod dosnt turn on at all

    See the appropriate sections in this Apple support document.
    iOS: Resolving update and restore alert messages
    B-rock

  • Hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do

    hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • I'm using ipod touch for a year now. I was using this morning and suddenly the ipod doesn't work at all maybe it got wet from my bag but there wasn't wet stuff in there. and itunes said iTunes has detected an iPod in recovery mode. please help me

    I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't work. I plugged to the computer and it said iTunes has detected an iPod in recovery mode. You must restore this iPod before in can be used with iTunes.
    Maybe my bag was little wet today but i don't think that is why.. since it wasn't that bed.. just some paper was wet and stuff..
    What should I do..? Please help me.

    Connect to the Computer you Usually Sync with and Follow the Steps Here...
    Recovery Mode
    http://support.apple.com/kb/HT1808

  • My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.

    My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • My ipod shows up that its connected but says its in recovery mode

    My ipod shows up that its connected but says its in recovery mode. HELP ME NOW.

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

Maybe you are looking for

  • Installing SSD in new mac pro

    hello, looking into purchasing an ssd for soon arriving mac pro. already purchased a 16g memory and a 2T HHD upgrade. i came across the speed tests for ssd on start up and the ssd's seems pretty impressive. (OWC site) I'm going to be using the new ma

  • Saving Causes MS Word to Connect to Printer

    I have the following problem. At home I have a wireless network set up with a wireless printer. Now when I am on campus taking notes, word always tries to connect to this printer, which is not possible. As a result it crashes and my notes are lost -

  • End to End processes in Customer Messaging and Points card

    Dear friends What are the E2E business processes involved in a typical customer messaging and points card scenario for a high street retailer. How best can we define Customer messaging processes? And what is the right way to model these processes if

  • Cannot access my web browser anymore!

    Arrrgh! Just typed a whole msge, then think I deleted it by pressing the back button by mistake, so apologies if this has gone out twice! I've had my 'curve 8900', 4 over a yr now & never had any major probs until now. I updated my phone about 3 mths

  • Need help getting 'move tool' to work in CS5

    I cannot move an item just pasted into an image and on its own layer, by using the move tool. The move tool has become a hand and moves everything including the unselected layer below as well as the item on the layer above that I wanted to move indep