HT1212 mini ipad will not get beyond apple screen what can be done?

This mini ipad has been frozen at the apple screen for 24 hrs.  Every so often it will go to the black screen with the loading/updatiing symbol but it too is frozen
Can this be fixed?

Try a reset first. If this doesn't work, post back. You may need to restore your iPad using recovery mode.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

  • I have a Brother HL4570CDW printer and is suppose to support AirPrint but my iPad will not recognize it...what can I do to correct this?

    Why will my iPad 2 not recognize a Brother HL4570CDW printer that supports airprint capabilites?  Is the problem with the printer or the iPad?

    You may need to update the firmware of your printer from the Brother site.

  • HT203254 My 15" MacBook Pro of about that vintage indicates that all is well by the hardware tests bu will not boot beyond Apple screen, stops with arrow and short horizontal lines.

    What serial and model numbers were known to be  Products Affected,  MacBook Pro, models with NVIDIA GeForce 8600M GT graphics processors?

    Welcome to the Apple Support Communities
    Take the computer to an Apple Store because your graphic card is damaged. The computers affected were sold between May 2007 and September 2008, so if your Mac is one of these Macs, Apple will repair the computer for free

  • After running malware cleaning software ( atfcleaner, gooredfix and tdsskiller) to fix a google redirection in firefox , google gmail will not run in standard mode,What can be done about this ?

    my os is windows xp pro
    Ive got the latest firefox 3.6.10
    cpu info: intel centrino 10
    when I go to the gmail website I am able to sign in .
    after I sign in it takes me to the usual page which says " loading [email protected] which usually takes a moment or two.
    now it tmes out with the messages :
    This is taking longer than usual. Try reloading the page.
    If that doesn't work, you can:
    1. Disable Labs and try again.
    2. If you're on a slow connection, try basic HTML view.
    3. For more troubleshooting tips, visit the help center.
    try reloading the page it will keep on timing out

    Hi,
    Please try to rebuil the WMI repository.
    For detailed information, please refer to the blog below,
    http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
    If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
    Best Regards.
    Steven Lee
    TechNet Community Support

  • I turned my Ipad off and when I tried to turn it back on, only the apple displays and it will not go past that.  What can I do to get it to come back on?  It won't acknowledge it when I plug it in either.

    I turned my Ipad off and when I tried to turn it back on, only the apple displays and it will not go past that.  What can I do to get it to come back on?  It won't acknowledge it when I plug it in either.

    I'm glad it solved your problem

  • My sons mini ipad will not send  advice given to others, but it's still not sending?

    My sons mini ipad will not send iMessages. I have reset network settings, turned it on and off and followed advice given to others with same problem, but it's still not working. Any ideas?

    Sorry it is actually on iso 7.0.3. Not sure what to do as keep trying to reset but it just won't send any messages.
    He is trying to reply to his cousin also on her ipad via imessage, so it should be really straightforward? He is getting messages from her, but cannot respond.
    When I sent him a message from my iphone, that didn't get through. We all have 1 apple id and account which is mine, and this is supporting 1 x iphone, 2 x mini ipads and1 x ipad 2. However one of the mini ipads and the ipad 2 is not used for messageing etc, just my iphone and my sone mini ipad.

  • HT201263 None of these answers help my problem.  My ipad will not leave the Apple logo.  I hold both buttons and the screen goes black, then the apple logo immediately pops back up.  I can't do anything because the apple logo just keeps popping back on.

    I haven't been able to find any answers that solve my problem.  My Ipad will not leave the Apple logo.  I hold both buttons and the screen goes black and then the Apple logo immediately pops back up.  I can't get the red slider screen at all.  No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

    Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
    When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
    while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
    You should now be able to restore

  • HT1414 My mini iPad will not respond.  It started giving me problems when I signed up with Sprint.  I'd like to cancel sprint.  They're no good.

    MY mini iPad will not respond. 

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If that doesn't help Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see.  The reason is that Quick Time will not support the video.  What can I do to be able to get these videos?

    I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see.  The reason is that Quick Time will not support the video.  What can I do to be able to get these videos?  I have all ready download Adobe Flash Player and installed it but it has not effect.

    Get Flip4Mac (for Windows Media videos):
    http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
    And Perian for everything else:
    http://perian.org/
    You should be able to play most videos with QuickTime player once both are installed.

  • HT4623 My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.

    My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I have been using Elements 12 without a problem for 9 months.  Now when I try to open the program, I get an error message  "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all.  What can I do to open the program?

    I have been using Elements 12 without a problem for 9 months.  Now when I try to open the program, I get an error message  "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all.  What can I do to open the program?

    Thank you for responding.  Nothing actually worked!  After reading the posts online, I called Apple.  They indicated they have seen problems with some software after their upgrades.  The technician was able to fix the problem on my computer remotely, but I have no clue what he did!  But, it was definitely related to their recent upgrade to my computer.

  • "DO NOT DISCONNECT" WILL NOT GET OFF MY SCREEN!!!

    please help! i have just gotten my ipod three days ago. it worked fine, at first. it has already deleted a few of my songs (which came from burned CDS) and now, "do not disconnect" will NOT get off my screen! it is COMPLETELY charged too. i can unplug it and listen to the 6 songs i have in there now, but other than that i cant download any on there. hopefully someone knows what to do because i'm terribly frustrated! thanks!

    I'm having like almost the same problem!! do not disconnect NEVER gets off my effing screen when its plugged into the computer and when it isn't, there isn't any music!! i just got my ipod mini YESTERDAY and it hasn't been working (i only tried today) like it charges and stuff but it won't let me put music on and the itunes thing never comes up and i'm so completely lost right now its really aggrivating :'(

  • Macbook pro will not advance beyond grey screen at beginning of boot

    macbook pro will not advance beyond grey screen at beginning of boot

    Try performing an SMC reset. I am having this problem also.
    To perform an smc reset:
    1. Shut down your Mac, leave the MagSafe charging in.
    2. Push three buttons: shift + control + option and the power button. Push and release together.
    3. Wait a few seconds then turn on your Mac as normal.
    Hope that works out for you!

  • I'm streeming on apple tv from my ipad,  and the subtitles is not visiable on apple tv. what can i do?

    i'm streeming on apple tv from my ipad,  and the subtitles is not visiable on apple tv. what can i do?
    on my ipad i can see subtitles
    and whill streeming i can selecte the wanted subtitles, but thay do not appeare on screen
    thanks

    in the apple tv my language is not listed in the setting
    on the movie bar i can select the wanted subtitles, but when i select the subtitles it keep going back to no subtiltes.
    whan playing from my macbook i can see subtitles.
    thanks

  • HT4972 my ipad 1 will not upgrade past ios4.2, what can I do?

    my ipad 1 will not upgrade past ios4.2, what can I do?

    What computer operating system are you using & what version of iTunes? You have to connect your iPad to your computer to update. After you update to iOS 5.x, the next time you can uipdate via wifi.
     Cheers, Tom

Maybe you are looking for

  • I got the error ORA-12154 trying to connect my app but not with the SQLplus

    Hello! i need your help, I have a client (Win XP SP2) and i'm trying to connect to the database in the server (Windows 2003, Oracle 10G) using the SQL plus, this is ok, but i try to do it throught the application developed in Developer 6i and i canno

  • XCelsius 2008 connectivity to SAP Netweaver BW

    Hi All I have installed xcelsius 2008 SP2(trial version) and trying to connect it to our BI (Netweaver 7.02) system through SAP NETWEAVER BW connectivity provided in xcelsius. While connecting it gives an "error : 2032" . I have some questions regard

  • New Macbook Pro to be 64bit?

    Are the Core 2 Duo processors that are expected to be used in the Macbook Pro 64bit? I see that the iMac is 64, but as I understand it, their C2D is a slightly different kind, no? MacBook Pro 17" 2gig Ram 7200rpm   Mac OS X (10.4.6)  

  • Support for Array Binding and PL/SQL tables (IN, INOUT, or OUT)

    I have attempted, unsuccessfully, to use array binding in stored procedure/function calls where the sp/sf has parameters that are PL/SQL tables. I have seen the topic floating around in this forum, but I have not seen the explicit questions: - Does O

  • F110 - RFFOUS_C

    Hi All, I have a requirement where i will run the transaction F110 and there i will enter the "run date" and "identification" and a check will get printed. Actually there is a sap standard program called RFFOUS_C that will get the check to be printed