HT1212 My daughter's iPhone 4s is disabled. I've tried restoring it and at the end of the process iTunes on my Mac tells me to enter the passcode but the phone says Emergency Call Only, iPhone disabled, connect to iTunes. It says EMERGENCY CALL ONLY. HELP
IPHONE 4S stuck in emergency call only mode. I got to the end of the restore process and itunes says to enter passcode but the phone still says emergency call only and still tells me to connect to itunes. please help. the link that repondants have been posting does not tell me anything!
myleandra wrote:
tells me to connect to itunes.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Similar Messages
-
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I can't access my iPhone 5s because I forgot my passcode. I tried restoring it and backing it up, but it says I must disable the app "Find my iPhone" but the thing is I can't access my iPhone 5s to disable my Find my iPhone app. Please help me out ASAP!
You're going to want to force it in recover mode thent o restore the device, unplug it from the computer, hold down the home button replug it back in intil you see the Itunes symbol with an arrow pointing towards it
HEre
https://support.apple.com/kb/HT1808 -
My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
-
i can not activate my verizon iphone 4, i restored to factory settings because my iphone wouldnt update to ios6 after trying three times and now that i restored it its saying that it cant activate my phone, please help
This is a Windows error. See this support document for help. iOS: Unknown error containing '0xE' when connecting to a Windows PC
-
i forgot my password for my iphone 4s and i cant plus it into itunes it says "itunes could not connect to the Natalie's iPhone because it is locked with a passcode you msut enter your passcode on the iPhone before it can be used with iTunes"
iOS: Forgotten passcode or device disabled after entering wrong passcode - http://support.apple.com/kb/ht1212
-
So i went and updated my iPhone 4S via the settings option from the phone, next thing it asked me to connect to iTunes, i've downloaded the new ios but i've been trying for almost 5 hours, countless problems occur, waiting for iPhone, stuck at verifying, error 0xE0000xx and so on, i've tried changing cables and redownloading iTunes, nothing seems to work. Help.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
-
iTunes could not connect to the iPhone “Rasmus's iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes. - Why is that?
iTunes is asking you to provide the passcode that was created when the device was activated.
You are able to get around the passcode if you know the apple id login and password and are able to restore the device back to default settings.
See this article for further directions:
http://support.apple.com/kb/HT1212
good luck. -
i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz
Sounds like you broke it.
-
itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
It says could not connect to the ipod because it is locked with a passcode. You must enter our passcode on the ipod before it can be used with Itunes. I forgot the passcode so how can I enter/ restore/reset it?
As the linked articl says, place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
i have an iphone 4 with 4.3.2 version, want to upgrade but my phone is not getting detected on my comp on itunes. i want to upgrade it to the latest version of the software, please help
If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone -
I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
-
My ipad mini says ipad is diable and to connect to itunes. I have connected to Itunes but the ipad says the same thing. I downloaded IO7 and nothing has happened. Also it tells me to enter my password on the computer and the mini is completly frozen. Please help.
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.
Maybe you are looking for
-
Can I use Photoshop cloud on my iMac and MacBook Pro as long as I'm only using one device at a time
does a subscription allow a user to have the software on two devices as long as it is being used on only one device at a time?
-
Game animation...
I'm kinda new to java, but not new to programming... I want to get a particular character to walk or do anything, meaning i want to use several images for a characters actions, im thinking of gif files, as they are the closest to small image files. A
-
What are the benefits of arch linux ?
What are the benefits of arch linux ? default package management /software installation tool .
-
App only in the launchbar and spaces
Hi there : ) I wondered how can I make a little app (cocoa/objectiv C) that has no windows, only an icon in the launchbar (like the sound volume for instance)??? Where can I find some documentation on that? And secondly, where can I find some informa
-
Hallo, ich habe zur Zeit das Problem eine Konfigurationsdatei im Measurement Explorer (ME) von Diadem8.1 aus auszuwählen. Wir haben verschiedene Maschinen, die jeweils unterschiedliche Meßdaten liefern. Ich habe im ME die entsprechenden Kanäle angele