HT1212 My ipad displays the message ipad is disabled- connect to itunes. When i connect to itunes, it says in itunes- Itunes could not connect to the ipad "Name" because the ipad is locked with a passcode, but ovbiously i cant unlock my ipad. HELP!!!
When i connect to itunes, it says in itunes- Itunes could not connect to the ipad "Name" because the ipad is locked with a passcode, but ovbiously i cant unlock my ipad. HELP!!!
Hi mChelle,
Follow the instructions that best apply to your situation in the link below:
http://support.apple.com/kb/HT1212
Cheers,
GB
Oh - I see that you have that article linked to your post above. Read the entire paragraph in item #1. It tells you what to do if it is asking for a passcode.
Similar Messages
-
When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2 to install the new os I had to start the iPad as new. But now I cannot backup from the previously backup ipad
Hi there,
You may find the troubleshooting steps in the articles below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
-Griff W. -
Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!
Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
ITunes could not sync calendars to ---'s iPhone because the sync server failed to sync the iPhone
iTunes could not sync calendars to ---'s iPhone because the sync server failed to sync the iPhone. How can this be resolved? I can figure out if the sync server failed to sync then iTunes would not sync the calendars. Everything syncs on my iPad mini 3 wifi and my iphone syncs my contacts but not the calendars. So what gives?
Brenden,
thanks for the reply, but the troubleshooting tips seemed to concentrate on 'Lion"," Snow Leopard" and the like, I haven't a clue what any of that is. I am using Windows 7 Pro with Service Pack 1 on my desktop and my iPhone is using iOS 8.1.2, as is my iPad mini. As I said on my previous post, syncing on my iPad mini works fine, It is just the iPhone that fails to sync the calendars. Hopefully a solution can be found as it is difficult to keep things synced on my iPad and then have to add everything manually onto my iPhone.
Jack -
Cannot save as PDF - "Could not save a copy as (filename) because the file is already in use..."
I have a number of PSD files I've created and I'm trying to save them as PDFs.
I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
Nothing seems to fix it.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. I'm willing to believe them if someone can show me how/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.Here is a clip from a past post where user could not drag and drop files to hard drive.
To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described. -
Hi, guys. For some days, when i try to sync my iPhone, the itune show me this command prompt "itune could not back up "..... iPhone", because the backup was corrupt or not compatible with the iphone". I don't know why this msg is showing. If anyody know any solution please help me. I am very worried.
Hi!
I´ve tried everything listed in http://support.apple.com/kb/ts2529 but with no luck.
I can use the backup from my old iPhone4 but my most recent one from the 5S itself, before the ios update, always reports the same error.
Any suggestions?
Thanks! -
..could not copy ..... because the file could not be converted.
iTunes 11.0.2.26 on Win 7.
I bought a song on iTunes for my wife the other day and she put it on her iPad.
After some syncing, iTunes is trying to sync that song to my iPad.
Everytime I get an error saying 'iTunes could not copy (name of song) to the (my iPad)
because the file could not be converted'.
Is there some way I can convert that song?
I'm not sure how it got to my wife's iPad and won't get to mine.
Thanks!The song showed in iTunes on my iPhone with a little cloud icon with a download arrow.
Tried downloading it and syncing. Same error.
Deleted the song from my iPhone.
Deleted the song from my iTunes Library on my PC.
Then re-downloaded the song to my PC's iTunes Library.
Re-sync'ed the phone. Went fine. -
Itunes could not sync mail account ... because the iphone canceled the sync
Hello
I get the error "Itunes could not sync mail account to the Iphone "........" because the iphone canceled the sync
Calendar, Bookmarks, Music and Video are Syncing ok
Strange !!
Any Idea ?
Best
Cyrili had a similar mail sync issue with a pop3 business account. i think the issue was i deleted the account from my iphone instead of removing it thru itunes. this was causing the canceled mail sync error with any changes to my syncable mail accounts to my iphone. so, i went it and re-added that pop3 account and it solved the problem. it now syncs everytime and allows me to make changes to which accounts i want on my iphone....which wasn't happening before.
-
My phone says on the homescreen " iphone diabled connect to itunes" but i cant because i have a passcode on my phone. which i cannot access.
read here
http://support.apple.com/kb/HT1212 -
i bought a iphone from my freind and its disabled and i have tried to restore it but when i do i tells me i need a update, and when i do this it tells me i need to wait 6 hours for the update and i just need to restore the iphone. i need help
Hey rox,
I'd say it's possible that you internet connection is slow. I would try to cancel the download and possibly restart the router, then try the update again.
Check you internet speed here.
http://www.speedtest.net
Hope this helps -
itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My ipad will not turn on. It was fully charged before it just died and would not turn back on. When I hook it up to my computer on itunes it says cannot connect because it is locked with a passcode. I know my passcode but the screen is just black, no power, so I cannot enter a pass code.
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????
Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
My iPad won't let me sign into my Apple ID when I try and download an app it asks for my id and password and when i type it in the iPad displays a message saying cannot connect to iTunes Store. However when i do this on my phone it works perfectly. Even when i sign in and out.
Has anyone else had this problem? If so how can I fix this?Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it. So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID). If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections.
Maybe you are looking for
-
ICloud syncing issues... again.
Right back to where I was a couple weeks ago. Numbers files aren't syncing to iCloud again. Restarted, reinstalled, etc. again and still nothing. I noticed that my files weren't deleted off of the ipad when deleting the app. When I reinstalled, all o
-
Plzzz help: formsweb.cfg testmode false
Greetings: I have installed Oracle Developer Suite on a Windows XP SP3 pc. When I run the form, Internet Explorer gives me a message: Internet Explorer encountered a problem and needs to close. I run the OC4J before running the form. And I am sure th
-
Hi, I live in Western Australia, and my local photos are being tagged as Washington. (Both use the WA abbreviation.) The maps are showing the right places, but the text labeling is wrong. I would love to see a fix for this in the first update. Thanks
-
Massive RSS and Network Problems
When I try and refresh my RSS feeds I get an error message that says *+There was an error updating the RSS feeds.+* +Mail cannot start a session with the system-wide RSS service. No RSS feeds will be refreshed.+ Also when I click the RSS icon in safa
-
I have 113 photo slideshow and in iTunes I created a playlist with 3 songs for the slideshow. During last song it stopped and started again. Why is this? I have the slideshow set to fit to slideshow.