HT1212 my ipad is not responding and 1/3 of the screen is white
my ipad is not responding and 1/3 of the screen is white.
Hi mandfrhi,
If your iPad isn't responding or won't start up correctly, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden
Similar Messages
-
My ipod touch 4th generation has frozen whilst being turned back on. The apple logo has been on the screen and ever so often the screen flashes white and then black. How do I get it to unfreeze at this stage?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a mac book air. I felt down and I have broken the screen: several white lines on the screen. Do you know if I can only change the screen? Is it expensive?
Welcome to Apple Support Communities
Take your MacBook Air to an Apple Store or reseller to have your display replaced. If you want, you can buy the display yourself and install it, but as you can see, that's expensive > http://www.ifixit.com/MacBook-Parts/MacBook-Air-13-Inch-Mid-2012-Display-Assembl y/IF188-083?utm_source=ifixit_guide&utm_medium=guide_intro&utm_content=required_ items&utm_term=macbook_air_13%22_mid_2012 -
My ipad will not respond, and when i try to shut it down it won't what can I do?
All of a suuden my ipad would not respond to taps, or any manipulation. When I tried to shut it down, the swipe for shut down would not respond. any ideas? what might be problem ? and what can/should I do? Thanks
First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
You won't have to swipe anything on the screen to reboot the iPad. Hopefully this will correct the error. -
Cannot remotely program DVR from browser and iPad, get "not responding" and "bad gateway"
Like others I've seen here, my remote DVR programming has disappeared, it used to work just fine from both the web and my iPad. I now get both "not responding" and "bad gateway" messages. I've tried everything I've seen suggested, including using the in-home agent for both "auto-fix common DVR issues" and "set top box auto correction", and rebooting the FiOS router. The self-diagnostics are all green, and it says that listener 1 is running. However, I still have the problems. From what I've read, there's a remapping process that can be run in the Verizon office that fixes the problem. Can this be done for me? Thanks!
Solved!
Go to Solution.Hello Skiprules and Nubby122,
I have sent you both private messages so we can assist in getting the issue resolved.
Mike_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan. -
I updated my ipad 2 OS4.3.3 to 5.1.1 recently. Unfortunately, was not able to restore the device. I seem to have lost the ipad's info like: Name, Capacity, Serial Number and Software Version in the process. Despite repeated attempts, the device displays error messages to account for not being able to update and restore the same. Any advice/assistance will be much appreciated.
Try DFU mode (Google is your friend, here is a link to one way:
http://www.iclarified.com/entry/index.php?enid=1034)
If that does not restore your iPad, contact Apple or your local
Apple Authorized Service Provider.
Your iPad wasn't jailbroken previous to the upgrade, was it?
Jailbreaking can cause instability and other problems with
upgrades. -
My IPad Doesn't respond and let me pass the ICloud backkup note after I click the OK botton.
Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
BTW - backup the iPad like you should. That will keep the message from reappearing. -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
reset all settings and contants ipad.Now ipad is not open?why/ on the screen always apple icon.
Why would you do that? That's not how you deal with issues on your iPad, that's how you deal with problems on poorly designed Windows machines.
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
everytime I close Firefox, it select the option "Read-only".
I stop the proces via Task management and then I can start Firefox again. I close it and the "Red-only" option is back again.Do you get this error only after closing and restarting Firefox or always?
In case of the latter:
Do you still have a default profile and is the profile as you see in the profiles.ini file marked as "Default=1" still present?
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Try to delete the profiles.ini file to force Firefox to create a new profiles.ini file and a new default profile.
*http://kb.mozillazine.org/profiles.ini_file
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use -
Ipod touch does not respond when I press on the screen
HELP! I cant shut it off or click on any thing on the screen. I can only click the home button, power button and volume thats it HELP!!
Try here:
iPhone and iPod touch: Frozen and unresponsive -
Laptop will charge and turn on, but the screen is white, how can i fix this?
can anyone help me????? my macbook pro will turn on and charge, but i can not get to the blue screen, all my laptop does is turn on and a gray screen comes up with the apple in the middle and a circle at the bottom of the page, but that is all it does. can someone please help me?
Hi k,
Try a Safe Boot:
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/HT1564
Gray screen at startup:
http://support.apple.com/kb/TS2570 -
TS4036 my ipad will not respond and can't be backed up at this time. help!!
My iPad is stuck on a screen telling me that I haven't backed up in 2 weeks. I can not get my iPad to respond in any way. I can't get it to shut down or move beyond this screen. Please help.
Perform a reset: Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. Release both buttons and await restart.
-
when i go to a website and try and go to another the screen goes white and nothing ever happens. i have firefox 4 installed
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
I was watching a video online yesterday on my ipad, closed the cover to move to another location when I opened the cover back up my ipad was acting funny. Now I can't get the scroll function to work and to get any of the buttons to work I need to triple tap them. Tried to reset by holding down the sleep button and the open/close buttons at the same time but all that does is alternate between a black screen and a screen with the apple logo.
If i let the battery run all the way down when I recharge will that reset the device? any other suggestions on what to do?It sounds like you had Voice Over enabled in the Accessibilty Settings. Are you are able to start the iPad now? It sounds like that is an issue as well.
This explains how to turn Voice Over off and on.
http://support.apple.com/kb/HT4064
You don't need or necessarily want to let the battery run down at all. If you let the battery run down and then recharge, that will not reset the device.
If the iPad is not responding at all, look through this for help in order to get the iPad up and running again, and then you can deal with Voice Over.
http://support.apple.com/kb/TS3281
Maybe you are looking for
-
Using Cinema display with Win 8 Ultrabook?
Hello, can I use a Cinema HD display with a Lenovo U410 Ultrabook? It has 4 USB ports and 1 HDMI. Running Windows 8. Thanks.
-
Dreamweaver 8 and windows 7 problem
can anyone help please. I recently transfered Dreamweaver 8 onto a new pc (windows 7) and find that the program keeps crashing on start up. I've tried running the various DW compatibility options but with no success. If anyone has experienced this pr
-
Help! difficulties in using colorimeter
I have a 24 inch Imac Recently purchased over the net from Adorama the eye-one display 2 colorimeter. The first time I used it, no difficulties, but now very frustrated. I have even uninstalled the software and re-installed hoping the problem would r
-
The print dialog comes when printing web pages and only when it goes away and printing finished, I can access the browser again.
-
Respons Tracking in CRM Marketing Mails
Hello, I would like to know if it is possible to create an Inbound Contact (Activity) if a customer clicks on an URL Link in a Mailform (Newsletter) of a marketing campaign. This should trigger the creation of the Inbound Contact in CRM. The Link Tra