HT1212 my ipad (which is old) suddenly stopped working the apple logo shows but nothing is working and i can't log into it again
I have witnessed a problem with my ipad
it stopped working suddenly and the apple sign shows but nothing happens after
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808
Similar Messages
-
My iPhone 5 suddenly stopped opening the Apple Mail app. It had worked flawlessly for years, but just stopped. It worked on my iPad, and of course on the computer. What's going on, and how do I fix it? I've turned the phone on and off several times, soft reset several times. There was no change in any settings when this happened, nor any new apps were added. Thank you for any help you can give.
Does it not work either way? Sending and receiving? Did you check the settings and make sure that nothing has changed? If you can receive email, but not send it, check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
My ipad wont turn on it stops at the apple logo and i get little white wording that says this device is not using requires_boot_connect_on_reset. Not sure what is going on. also says appleBCMWLANBusInterfaceHTSIC reset chip
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
Help!! I'm in Belize (not a good place to be with an Apple, as international as you may claim to be!) and my computer decided to "quit" thusly:
White screen with a crossed out circle which flickers to the Apple logo sometimes, but won't open. What can I do to open it? (I do have my recently backed up data with me, but no loading discs for my computer.
Hoping there is a solution,
DianaThe make of the disk doesn't really tell us how your data is being backed up onto that disk. Do you know what software it uses?
For example Time Machine copies files every hour in a way that is not bootable, but you can extract those files & get all your data back into a working OS.
Carbon Copy Cloner duplicates a disk in a way that is bootable - it would appear when holding alt at startup so you could use that to boot & inspect the state of the internal disk.
It may also be Seagate's own software that does something different.
Please try recovery mode, if that works you can try repairing the disk in Disk Utility.
OS X: About OS X Recovery - Apple Support
If that works, select Disk Utility & see if the internal disk can be repaired in the first aid tab.
Recovery mode can also download OS X & reinstall it, however you really need to know if the backup contains everything before that is attempted, otherwise you may lose data. The OS is also around 5GB so you may have issues if your internet is capped or unstable etc.
P.S.
I have no idea if this is helpful, but there may be help out there…?
http://belizeyp.com/Belize/I-T-Engineers-Consultants/profile
https://www.google.com/maps/place/VIP+wireless/@17.4938135,-88.1914518,4205m/dat a=!3m1!1e3!4m2!3m1!1s0x8f5c583ff12cb605:0x17a5a2f97fc838c3?hl=en
Search & ask around, you may find some help, try recovery mode first. -
When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??
You may need to do a Restore in iTunes.
Clicking sounds from an iPod that has a hard drive is probably not a good thing. It is possible that your iPod's hard drive is becoming unreliable. -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?
Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives? -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.
Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore -
My ipad 2 is not turning on, just the apple logo with a moving circle over it and no starting up?
my ipad 2 is not turning on, just the apple logo with a moving circle over it and no starting up?
Try using recovery mode
http://support.apple.com/kb/HT1808 -
my ipad mini is keep on crashing. reboot many times. after the apple logo shows up, the screen will turn into black again.
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
I installed a blank cd to burn a playlist which I have done many times but nothing is happening and I can not eject the cd and when I try to close ITunes I get a message saying a cd is burning but nothing is happening and I can not do anything in ITunes
I have this tip in my notes to eject a stuck disc, but not even sure if I have used it before -
Restart computer while holding "option" key, when hard drive icon appears, release "option" and hold "eject" key.
Hope it works! -
when i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me! i love my ipad sooo much.....!!!
Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that does not help, you may have to restore your iPad.
iTunes: Backing up, updating and restoring iOS software.
If that doesn't work - You will have to use recovery mode
iPad: Unable to update or restore -
My IPad shut down this afternoon and now it won't start up. It's less than 1 year old. I tried plugging it in and pressing the on/off button. After holding the button in for several seconds, the Apple icon appears, but then disappears.
First, try this:
Plug it in to the wall using an Apple charger and Apple cable for several hours. The idea is to fully charge it.
Then hold the home and on/off buttons together for about 10 seconds. Hopefully the Apple logo will appear and it will start. Do not release the buttons until you see the Apple logo.
If it starts, great. If not, you say your iPad is less than a year old. If you bought it brand new from an Apple Store or Authorized Apple vendor, it is under warranty. Take it to an Apple Store or Authorized Apple Service Center for diagnosis and repair. -
I reset my mini ipad using settings as itunes was "freezing" now my ipad is completely frozen -- shows the apple logo and white line underneath and the it stops
<Edited by Host>Reset it by holding the power and home keys down until the Apple logo appears.
Barry
Maybe you are looking for
-
Custom cropping using pixel dimension
The banner image module for my website requires images cropped to 940 x 400 pixels. When I use the Custom cropping function in PSE 12 (on a Mac OSX 10.9.2), it only shows a cm dimension. Can I do a custom crop using a pixel dimension?
-
Is it risky to start a online business using quicktime player?
I am starting a business with video on the internet, but after doing my research I find that most people have the flash player on their browsers and many would have to download the 30mb+ file filling out forms etc just to view the video content on my
-
AP1242 Not joining 4404 controller
Hi all Can anyone please help, my 1242 access points will not join my controller, I have done a debug and can see the Access point sending a discovery request, then the controller says discovery request sent, but then nothing happens, any ideas what
-
Hi, I am having problem in doing risk analysis in CC. I have created required JCO connection to backend system. When i run the risk analysis on a particular system. Job show status is completed, but i get message "No match/conflict found". This is no
-
An interview with the guy who finally nailed the end of "The Next Episode"
http://noisey.vice.com/blog/an-interview-with-the-only-person-ever-to-nail-the-smoke-weed-every-day-... This might be the best Vine ever made This topic first appeared in the Spiceworks Community