HT1212 my ipad will not restore after passcode dissable

passcode dissable , connect iTunes atempt 6 failure

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
If this all fails then:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
  3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
  4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
  5. If necessary, open iTunes. You should see the following "recovery mode" alert:
  6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Similar Messages

  • Ipad will not restore after ios5 update

    Help!  I downloaded ios 5.  Now during the install on my first gen ipad 3g64, it will not get past the updating firmware.  Gives error.  Have tried at least a dozen times.

    Restore from iTune Backup
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • IPad will not restore after iOS7 update

    I just updated my iPad to ios7, did restart and restore and now I cannot get past the welcome screen.  It keeps asking me to restore from backup, which I have done repeatedly.  My computer shows my iPad as having everything restored, but the iPad does not.  HELP!!!!!

    Restore from iTune Backup
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • HT201210 my Ipad will not restore after trying to update what do I do?

    I tried to update my Ipad to 6.0 .  NOw I am getting an alert that was unable to restore!!!  What do I do?  All I was trying to do was add some music to my IPAD!!

    Did you get an error #? What iOS version are you currently running?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My iPad will not restore after an issue when synching

    I have been having problems with my iPad. I have been trying to synch it and it gave problems and now appears to lost everything on it. I have connected it to iTunes and tryed to do a rstore but about half way through it says it has detected an iPad that requires a restore and then completes but does not do the reset. How do I rest the iPad to take it back as a new device and try and start again from there ?

    bcjbcj wrote:
    I have tried this repeated with no success. I think my only option to take it back to a new iPad. How do I do this ?
    Recovery mode does exactly that.  At this point, you need to contact Apple Support 800-275-2273 in the U.S.) and get help there.

  • HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown  and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

    Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown  and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

    Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
    I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
    any thoughts?

  • TS1567 my ipad will not open after ios7 installed

    my ipad will not open after ios7 installed

    kerry236 wrote:
    ipad dissabled
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766
    NOTE:
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • HT1430 ipad will not restore - error 4014 not found on website

    ipad will not restore - error 4014 not found on website - will not turn on for hours

    Take a look at this thread. Several solutions are offered.

  • Contacts etc. will not restore after an upgrade to...

    I just backed-up my N95 then I upgraded to V11.0.026 (Vodafone). Now it will not restore this back-up or any back-up from previous months, it wont even sync with my N70 to get some numbers out of that!!!! Upgrading it was the biggest mistake I could have made, I only did it because of the constant lock-ups. Any ideas? Do I need to take it to Carphone Warehouse for a DOWNgrade??

    I remember the backup being an issue after the upgrade to version 11. Mine backed up Contacts only and not Calendar. In fact I remember reading somewhere that it actually warned you about the backup issue before you did the upgrade.
    Ericssson EH 237, Ericsson EH 337, Ericsson GH 388, Siemens S25, Nokia 6210, Nokia 7250, Nokia 6230, Nokia 6280 & O2 Atom , Nokia N95, Nokia 5800 XpressMusic

  • Ipod will not restore after update

    I downloaded the new version to make app. to my ipod touch and I was told to restore my ipod to have the update. Now my Ipod will not restore and I have lost everything in Itunes also. What do I need to do?

    I just did the install of 2.0.02 last and I had one dickens of a time restoring my library. Here is what happened to me. Right before doing the update it tells you that all of your music, videos etc.. will be removed from the Ipod Touch once the update is done installing. So I found a DVD and burned my library to it. Then I went ahead and did the install. It clean my Ipod Touch clean, but my iTunes library was still intact so I thought all will have to do is resync it but that didn't work. I tried and tried. I disconnected my external HD. Oh yeah by the way this is a new computer that I just bought and last night was the first time I used iTunes on it so I had to populate my library using iGadget.
    Anyway, I realized that I didn't have manually manage my iTunes library unchecked I unchecked it and it began to sync the back up copy I had of my library. Did either of you back up your library before installing 2.02? Do you have a place where most of your music is stored outside of iTunes? You cannot have Manually manage library checked it won't restore if you do. Be aware though 96% of my cover art was gone with this restore. How annoying. I don't know if this is the information you were looking for but I hope I have been able to shed some light on the issue.

  • Ipad will not restore in Recovery Mode due to Passcode

    Hi There, my 9 got a new ipad 2 for xmas and he has forgotten his passcode.
    I have put the Ipad in recovery mode and connected to itunes but right at the end it states ipad cannot connect to itunes because of the passcode.
    Ive tried find my iphone and erase but it states the ipad is offline even though wifi is activated.
    Is there a way to reset the Ipad at all as recovery mode reset is not working.
    And no its never been connected to a pc as it was 2 hours old... any help would be awesome..

    Recovery Mode Step by Step
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    On Computer
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad
    (a) Set up as new iPad   (b) Restore from this backup (select from list of backups)
    23. Restore from this backup
    24. Continue
    25. Restoring iPad from backup
    26. The settings of your iPad have been restore; keep iPad connected to computer
    27. Syncing iPad (Step 1 to 5)
    28. Preparing apps to sync
    29. Copying 1 of 9
    30. Sync apps, movies and music to iPad
    31. Finishing syncing
    32. Eject iPad

  • IPad will not activate after restore

    Downloaded iOS 5 and after it does what it was supposed to in iTunes, it was time to do what it was supposed to on my iPad.  Received as error message saying there was a problem and the iPad needs to be restored.  did that and now it says the iPad can not be activated and it is not recognized when I try and sync with iTunes

    I sounds like a hardware problem to me. I suspect you can send it back but first your typically need and RMA number which you get from Apple. Have you asked the locale store of how to send it back? Since it seem that it is within the 90 day free telephone support period you should be able to call Apple in the USA for shipping instruction. Go to the USA Apple site to find contact information.

  • After updating to os5, my iPad will not restore. What do I do?

    When I attempt to restore my iPad it first says: An error occurred while restoring this iPad (-1).  When I hit okay on that it then says: iTunes could not restore the iPad because an error occured. I have gone through all of the suggested tips on the website but it is still not working. Any ideas?

    All sorted now!!
    Check out this thread by MrCEO
    Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
    The answer is to:
    set up my iPod (or iPad - should work the same) as a new iPod. Then in iTunes I synced everything as if it was a new iPod. After the sync was complete I right clicked on my iPod on the left in iTunes and selected restore from backup. I selected the right backup file (the older version, not the one just created) and it worked!!

  • Ipad will not restart after new ios download and i cannot open it as it asks dfor passcode-I've no idea what this is

    My Ipad keeps asking for my passcode- it is connected to my computer and I have updated my password.-ipad does not recognise this!
    What should I do?

    settings>icloud, scroll to bottom of page and tap Delete Account, then log in again with the correct data.
    Have you already tried that?

Maybe you are looking for

  • ITunes on External Drive - Possible to have smart playlists sync automatically to internal storage?

    Hey guys, As the title says, I've got my entire iTunes library stored on a desktop external hard drive.  Of course, when I need to take my computer anywhere, it's got no music on it. I have the majority of my iTunes library rated, and have a bunch of

  • When saving MHTML files I get the IE icon instead of Mozilla.

    When using Mozilla/Firefox, I cannot save new MHTML files with Firefox icon-the icon appears to be the same as "Text icon". Also, I cannot use the "Opens With" to change existing MHTML files from IE icons to the Firefox icon. Some FF icons are correc

  • Turning off second monitor

    I recently purchase a Sharp LCD television and I'm now using it regularly with my G5 in conjunction to my 20" cinema display. When I watch DVDs on the Sharp it's very annoying/distracting to have the 20"'s backlight glowing. I was wondering if there

  • Help to generate totals in Hierarchical Query

    Hi Everyone, I've a small problem which I hope you might be able to help me with: I've the following 3 tables populated with sample data: --- Element_relation defines the hierarchical relationships --- create table element_relation (parent varchar2(1

  • Best practice for a new wordpress install / dreamweaver

    One thing that is being shown in the demo video's.  A pre created wordpress document, I wish, they started to show with a new wordpress install / setting up the server etc.  What are the best practices with using a service which has a one button word