HT1212 my iphone is disabled plz help
my iphone is disabled,plz do help,i dont use icloud
Connect in recovery mode to your computer, explained in this article, you will get the option to set up a new code during this process: iOS: Unable to update or restore
Similar Messages
-
i found an iphone 4 it was totally disabled it was written on the screen already "IPHONE IS DISABLED" plz help me to enable it
The iPhone isn't yours to work with. Turn it in to the police in the area in which you found it.
-
My iphone is disabled.Followed the steps in itunes after connecting to my computer but getting a message saying that i must turn off 'find my iphone'' on my device before i can restore it.Impossible for me to do that because i obviously have no access to my device.Can anyone help me with this problem please?
I think you should call via phone or perhaps take it to a phone store. I suggest taking your id, box packaging and other necessities such as the reciept of the phone being purchased.
Hope this helped -
HT1212 My iphone is disabled and I do not have access to computer. What do I do?
My iphone is disabled and I do not have access to a computer....what do I do?
One option if you have Find My iPhone turned on:
http://support.apple.com/kb/ht1212
"If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode."
This still requires access either to a computer or another iOS device. -
my iphone says disabled on my screen. i have only just got it and in have never synced it witth my computer. please can you help
Follow the directions on the support document that you linked to the forum with. Your only option is to restore the device as a new phone.
-
My iphone is disabled ,please help, my iphone is disabled ,please help
my iphone is disabled i get a message saying connect yo itunes but i am unable to connect .
Open iTunes on computer. Then connect iPhone to computer. Then hold both Home and Power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Then Restore the Firmware.
-
HT1212 my iphone is disabled and i cant go into the itune
The iphone is disabled , can't connect to itune because the passcode can't be remembered. i needed immediate solution without erasing / deleting all the information in my handset
When you Restore/Recover your phone, all data will be deleted.
-
My iphone is Disabled and says to connect to itunes, i did the whole restore thing but then an error pops up and says' sorry we cannot restore the iphone 'iphone'" ... What do i do?
Use recovery mode, you might need to do it a few times.
http://support.apple.com/kb/HT1808 -
HT1212 my iPhone is disabled ..... and i don't know how to open it ?
my iPhone is disabled and i don't know how to open it
Follow the directions in the article you linked.
-
Find my iPhone is activated on my device. My device is locked. iTunes is prompting me to access my iPhone even though Im locked out of it to disable find my iphone before I can use the backup???
Can anyone help me with this?
Wonder if this has anything to do with iOS7 installation?iOS: Forgotten passcode or device disabled after entering wrong passcode
-
i just open plugged in into my computer and i press file>press device>press back up and restore,but i just cant press that backup and restore how?my cousin tell me my phone just like cannot plugged into the computer,pls help meeeeeee
There's always a solution for a problem. So don't worry about what's going on withyour iOS device. Just follow these steps. I hope It will help you.
Setp - 1.
First of all, make sure that you're device have at least 50% battery. If not, charge your device properly to 50% or higher battery percentage then continue to step 2.
Download a latest version of your iPhone firmware from here:
http://www.idownloadblog.com/download/
Step - 2.
Connect your device to your computer and launch iTunes.
Step - 3.
Power off your device by pressing and holding power button.
Step - 4
Now get ready to put your device into recovery mode as following steps:
Hold down the sleep/power button and home button together for exactly 10 seconds, then release the power button
Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected
When you are in DFU mode your iPhone screen will be completely black
Step - 5
Simply click 'OK' button on that message and click 'iPhone' on top-right corner of your iTunes window.
Step - 6
Now you can see 'Restore' button there. Just press and hold your computer's 'Shift' key and click the 'Restore" button and load your latest iOS firmware file.
Wait until the setup will finish. When the setup will complete, you're done. -
HT1212 if iphone is disabled try again 22,787,904 minutes what to do to unlock it?
i need help to unlock my iphone 3gs. it says there iphone disabled try again 22,787,896 minutes. i have another phone 4s and its ok but i have a problem with the password. i already dont want to restart my 3gs as i might loose all the pictures, messages and videos thats inside my phone. i dont have any back up for it.
See here http://support.apple.com/kb/HT1212
-
HT201401 phone displays's (iPhone is disabled) please help
i phone has a display of disabled, can anyone help me?
Take a look at this Apple doc -> iOS: Device disabled after entering wrong passcode
You'll have to enter the correct passcode or restore the iPhone. -
my iphone has been disable . It happend during my trip from USA to INDIA. not able to go to home screen. Tried to connect to itunes but it says need to enter password first on iphone which i am not able to do as it is disabled. Need help.
Try a reset:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If this doesn't work, restore it from a backup through iTunes. -
I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
$headers = "MIME-Version: 1.0\n" ;
$headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
$headers .= "X-Priority: 1 (Highest)\n";
$headers .= "X-MSMail-Priority: High\n";
$headers .= "Importance: High\n";
// Additional headers
$headers .= 'From: Rakesh <[email protected]>' . "\r\n";
foreach($disemail as $email)
$to = $email;
$subject = $succMessage['email_subject'];
$message = $smsText;
mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
$smsText = utf8_encode($smsText);i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
would like to have your thoughts though.
$headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n format=flowed Content-Transfer-Encoding: quoted-printable";
Maybe you are looking for
-
Script or function for flipped images
Hi My team is an in-house creative team on a MAC environment. We do our own preflighting. From time to time vendors send us backward images. Some slip through the cracks before placing them in InDesign and we have to manually inspect each image befor
-
Error running program AI_CRM_CPY_PROCTYPE in SOLMAN 7.1
Hi Gurus. I'm trying to run program AI_CRM_CPY_PROCTYPE to copy transaction type SMIN to ZMIN in SOLMAN 7.1 SP3. When I choose button "start copy process", the program terminates with error "ASSIGN_BASE_TOO_SHORT". Do I need to change something in t
-
IMessage error message? Can't sign in
IvE tried changing the dns to 8.8.8.8 and tried 8.8.8.8, 8.8.4.4 doesn't help. Frustrated. Any help?
-
hi all, i am facing a problem while displaiyng my pages. i hav a list of records of which i have to display a predefined no of records at a time,say 6. i am getting the list from database and then putting it in session. on my page i would give links
-
Logic Audio 6 installation software
This is a longshot, since it relates to the pre-Apple Logic Audio 6 version of the software. I have been using Logic Audio 6 for the past four years. My hard drive just died and had to be replaced. When I got the computer back from the Apple store, t