HT1212 my ipod is disabled, but i DO know the passcode. and iv never connected it to a computer or anything. how do i fix this?
and i dont have a computer to downlaod itunes.
Disabled
Without iTunes:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
With iTunes
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Similar Messages
-
My Ipod is locked, I do not remember the passcode and I have no access to itunes/computer - what is best way to access this ipod?
If you set up Find my iPod, you can access iCloud from another device and remote wipe it.
See http://support.apple.com/kb/HT1212 -
After downloading the iOS 7, it asked me if I agree to the terms and conditions and I keep clicking agree but it stays on that page and I can't even use my phone now. How do I fix this problem?
I have the same problem. frozen on the Terms and Conditions page. Any help, anybody?
-
My ipad is disabled, I dont know the passcode and I dont have a computer to connect to itunes... is there anyway of reactivating ipad without connecting to itunes?
Sorry but no. You will need to get access to a computer with iTunes somewhere to restore the iPad. You can get help with this at an Apple Store if you have them in your area. Note that if you haven't backed up your iPad to iCloud, you'll lose all your data. Apps and other purchases from the iTunes Store can probably be re-downloaded.
Regards. -
please help me
The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.
-
im locked out of my ipod, and the screen isnt responding when i go to swipe to unlock it or when i swipe to turn it off. All of my notifications are there but i cant reply to any of them. My screen is completly unresponsive. But, in the top left hand corner, there is an outline of a box. how do i fix this?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?
My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
My ipod is disabled because i dont know the password
my ipod is disabled because i dont know the password
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my ipad is disabled because my daughter changed the passcode and then she forget it and now we tried several times and the ipad is sdisabled and says to connect to itunes what do i do to undisable it?
Try this first - I saw a recent post where a user with the same problem after an iOS update used his Apple ID password.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
my friend gave me her ipod about 2 years ago. neither of us know the passcode and now we have no way to link it to the original itunes account. is there a way i can reset it so i can use it?
I have tried plugging it in and holding the sleep/wake button and home button at same time and all it does is gives me the "slide to power off" option. Is there anything I can do??? Please Help!
Message was edited by: Unordinary92Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
Does anyone know how to fix this?
Thanks!I am replying to my own post here as I seem to have fixed the problem.
I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
one more bug in a complicated system I guess -
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
I have a 3rd gen iPod touch and I downloaded the most recent itunes, ever since I did, only the first song syncs to the ipod. As soon as it gets to the second, it still says its syncing. However, nothing happens. How do I fix this? I have restored and updated the ipod. I have the new iTunes. I have restarted my computer checked the connection and everything.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??
Perhaps something in this support article will help:
http://support.apple.com/kb/TS2755
Regards.
Maybe you are looking for
-
Update column using a calculation based on a query
Hi, I need to update an empty column I have created in my table. I have created a query that returns the variables I will need in the calculation but I'm not sure how to link it. This query works fine. Select z.seq_no , z.Day_X , z.Day_Y , x.Night_X
-
How to hide the URL path on click of an link to URL element,from user
Hi All, I have an link to URL element, on click of the link it opens the specified url in a new window. But in new window the user is able to see the entire URL path. I want to hide this path from the user. Can any one please suggest me how to
-
"The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes"
I just updated iTunes, and it completed successfully. Then I tried to open it, and it asked for the user agreement like normal. Then it wouldn't open, saying, "The file iTunes Library.itl cannot be read because it was created by a newer version of iT
-
Image field - cannot set h and w attribute of all node elements
Hi guys, We currently need to show some photos on our .pdf forms when the form is generated. The number of pictures are unknown at runtime and need to be determined dynamically. This is not the problem - we figgured this out by using base64 encodin
-
FSCM 9.0: COBOL Process does not post credit accounts of a Journal Entry
Folks, Hello. I am working on FSCM 9.0 General Ledger module. COBOL process GLPPPOST posts only debit accounts of a journal entry into PS_LEDGER table but not credit accounts of a journal entry. Can any folks understand how to solve the issue ?