HT1212 My sis inlaw didnt know my passcode and now my iphone4s is disabled.. I dont have a computer what should i do??
My phone4s is disabled i dont have a computer to sync..
You need access to a computer running the latest version of iTunes.
Similar Messages
-
my friend gave me her ipod about 2 years ago. neither of us know the passcode and now we have no way to link it to the original itunes account. is there a way i can reset it so i can use it?
I have tried plugging it in and holding the sleep/wake button and home button at same time and all it does is gives me the "slide to power off" option. Is there anything I can do??? Please Help!
Message was edited by: Unordinary92Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
My daughter has managed to forget her new passcode and now it says iphone disabled connect to itunes, but it wont let me....help!
Hi there esbrewer,
You may find the troubleshooting steps in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
If the device is not being recognized in iTunes, take a look at the article below for some additional troubleshooting steps.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
My daughter updated to the ios 7 and it asked for a passcode. The phone will not except the passcode and now her phone is disabled. Anyway to unlock without resetting?
That's because the device has not been synced to that computer. As per my earlier instructions... you will have to force it into recovery mode & restore as a new device.
Recovery Mode... http://support.apple.com/kb/HT1808 -
HT1766 I have forgotten my passcode and now the Iphone is disabled.
I thought that the iphone would be disable temporarily and increase in time. However it has now been disabled since 8:30am and it is starting to get annoying!
Can anyone help me?If you've updated to iOS 7.0, & have Find My Phone turned on, you won't be able to use a computer to restore your phone without first turning Find My Phone off...obviously something you can't do if you don't know the passcode. You'll have to first login to iCloud.com & erase the phone, then restore from backup, if you have one.
-
my iphone is disabled. how do I restore it?
You'll have to use a computer to restore your phone. If you hold down the home button while plugging your phone into your computer itunes should recognize that it is in recover mode. Then you'll have to restore the phone as new.
-
Forgot my passcode and now my ipod is disabled
my ipod is disabled and cannot get it to un lock forgot thr passcode
helper77, the the iPod disable you can't backup the iPod and yo have to place the iPod in recovery mode as Jbryan22 previous reply said
helper77 wrote:
Dude all you need to do is connect it itunes, back it up and click reset
You are good to go.
Hope this helped -
I do not know my passcode and it is disabled
I do not know my passcode and now it is disabled. What do I need to do unlock my ipod so that I can use it again?
The device must be restored from the computer it was last synced with.
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iPhone and iPod touch: Unable to update or restore -
How can I reset my access passcode without having ever synced the device before? I don't remember my passcode and now the ipad is "disabled" from too many failed attempts.
You will need to reset the iPad back to factory defaults : iOS: Forgot passcode or device disabled
What iTunes purchases that you can redownload for free from the stores will show in the Purchased tabs in the App Store and iTunes Store apps, and the Purchased tab in the iBookstore in the iBooks app -
and i dont have a computer to downlaod itunes.
Disabled
Without iTunes:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
With iTunes
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..
iOS: Forgot passcode or device disabled - Apple Support
-
My ipad is disabled, I dont know the passcode and I dont have a computer to connect to itunes... is there anyway of reactivating ipad without connecting to itunes?
Sorry but no. You will need to get access to a computer with iTunes somewhere to restore the iPad. You can get help with this at an Apple Store if you have them in your area. Note that if you haven't backed up your iPad to iCloud, you'll lose all your data. Apps and other purchases from the iTunes Store can probably be re-downloaded.
Regards. -
my husbands iphone4 was dropped and it doesnt work now... according to powermac representative, hardware related problem, what should i do? anybody knows where to bring the unit for repair, because powermac didnt accept it.
Who is powermac? Are they and authorized iPhone sales site?
-
I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode
I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring. -
my iphone's screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do
Sorry, there is nothing you can do.
FYI: Damage like that is not covered by warranty, & all Apple will offer you is an out of warranty replacement...cost, in the US, for an iPhone 4, is US $149.
Maybe you are looking for
-
Creating a backup of a hard drive continuously
Hey, I'm thinking of getting another hard drive which would be for backing up my entire hard drive. I'm not sure whether I'd want this to backup continuously (i.e. if I downloaded a file, it would go straight to both hard drives) or backup at certain
-
Hi I want to INSERT a record in a Z-Table if a material belongs to a particular plant. My Code is:- IF plant is not initial and plant = say 'ABC'. INSERT ztable with material number ENDIF. Please corerct it if it is wrong at any place Thank You
-
Transaction OOQA - add a new qualification scale to qualification group
hello masters, i have created a new scale, it is a quantity scale, with transaction OOSC but in transaction OOQA the scale that i created doesn't appear. Someone knows if i have to do more something else. regards and thanks in advance Mario
-
Hi, I just need some ideas/suggestions on how to implement a "versioning" in my database table with ODI. My table has the following columns: TBL_ID | DATA1 | DATA2 | VERSION_NO 1 | X | X | 0 1 | Y | Y | 1 As you can see, for every update made on one
-
hi, i am getting following error when add feature table to topology, any way to resolve ?? SQL> CREATE TABLE LAND_PARCELS(FEATURE_NAME VARCHAR2(30) PRIMARY KEY, FEATURE SDO_TOPO_GEOMETRY); Table created. SQL> EXECUTE SDO_TOP.ADD_TOPO_GEOMETRY_LAYER('