HT1212 Restrictions came on with unknown pass code. I did not turn it on and no one had access to my iPhone
"Restrictions" suddenly turned "on" with unknown passcode.
No one had access to my iphone
how do I unlock "Restrictions"
First, the restrictions would NEVER turn on by itself. And second, this is a passcode set up manually by the user. If you can't remember, the only way to remove this is restoring your iPhone to factory conditions using iTunes.
Similar Messages
-
Wifi will not work. The button in settings seems to be locked. Tried control panel and siri to turn it on, doesnt work because the settings wont turn it on. Need help ASAP cause my data limit is approaching.
If the battery was completely drained the iPad will not respond for some time after connecting it to the charger. Connect the iPad to the charger that came with it and plug that into a good wall outlet. Wait 30 minutes. Then reset the iPad.Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until it's battery shows fully charged. If the iPad still does not start Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Be sure to back up your device before taking or sending it to Apple. -
How can I reset my sons restrictions pass code? I have failed 9 attempts and it locks me out longer and longer.thx
see here
http://support.apple.com/kb/HT1212
No choice -
I have a 16GM Mini IPad. The screen won't swipe. I tried resetting it but that didn't work. I attempted to connect to ITunes to try a restore but I can't do that. This is because the IPad is locked with a pass code which I can't enter because I can't swipe. Does anyone have any suggestions on how to fix this?
If Ralph's suggestion doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
Forget iPhone password, when connect to computer "iTunes could not connect to the iPhone because it is locked with a pass code. You must enter pass code on the iPhone before it can be used with iTunes."
You have to restore it using a computer with iTunes per the knowledge base article above.
With iOS 7, if you have Find My Phone turned on you can login to iCloud from a computer and send an erase signal to the iPhone to clear it...that will erase all content and settings. -
is there any way to restore factory settings on an Iphone 5s that will not connect to Itunes because the phone is locked with a pass code. Problem is that the screen is completely shattered.
If the screen is completely shattered why bother to try and restore the phone?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
Help needed with iPad pass code
Just bought a new iPad and backed up from my old one.
Now being asked for a pass code but its not accepting the code from my previous iPad
Can anyone help?If you can't remember the pass code you will have to wipe and restore as new.
http://support.apple.com/kb/ht1212 -
Can I access my husband's iTunes acct. from my iPad? i have his permission & pass code. We want to keep all music in one place & family accessible.
If you log into his account and download some of his past purchases on your iPad then you risk tying your iPad to his account for 90 days : iTunes Store: Associating a device or computer to your Apple ID
But it looks like that might change when iOS 8 is released in the Autumn (no date has been announced yet) : http://www.apple.com/ios/ios8/family-sharing/
If you have his content in your computer's iTunes library then you could sync it from there instead of risking the 90 days association on your iPad. If you don't then you could copy it from his computer and then sync it to your iPad e.g. copy his music to a flash drive and then add it to your library via File > Add To Library -
I bought a Mac PowerBook in 2008. It came with InDesign CS3. I did not use it. My computer was stolen in 2014. I had backed up the hard drive. I reinstalled on my new Mac laptop. I want to use the CS3 now. It will not download or install. What do I do?
From where are you trying to download it?
-
HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible - this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7
You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.8
Mac download (.dmg file) click here DNG Converter 8.8
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial -
Hello, i recently bought an ipod touch 5th generation and it came with a passcode which i did not know, it is now disabled and i am wondering on how to unlock it using itunes on the computer
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
However, you will likely run again the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
You either have to get the Apple ID and password of the previous owner and enter it or have them remove the iPod from their account.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account -
i can not get ipod touch to turn on. it shows picture to connect to itunes but it says to enter pass code but will not gogto screen to enter code. HELP PLEASE
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
A camera icon (with the ends cut off) is on my lock screen, and it wont open the camera app. how do i fix this? does anyone else have this problem with the iphone 4s?
What do you mean "with the ends cut off"?
You swipe the screen upwards starting on this icon to open the camera app. -
Today, i attempted to update my iPod (4th Gen) to iOS 6 on my computer. When it was updating it came up with an error, it then asked me to restore my iPod which i did. During this process it came up with another error. Now, everytime I turn on my iPod, it asks me to connect to iTunes. When i do this, it connects to the computer but doesnt show up in iTunes. How do i fix this?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. -
just purchased blue ray movie from store with a redemption code but will not download with out inserting disc I have a macbook air
I am experiencing the same thing. I have many books that I used to read on my iPad.
Now on iBooks in Mavericks all my books downloaded correctly apart from two which I really want to work (The Lean Startup and Communicating The User Experience).
When I download both using the cloud icon just when it reaches 100% I get this message:
[Insert Book Name] failed to download
To try again, select Check for Available Downloads from the Store menu.
When I check for available downloads it says I have already downloaded all my books.
Anyone know how to fix this.
I do realise that this is only v1 of iBooks so I hope Apple sorts it out soon.
Thanks!!!
Maybe you are looking for
-
Help please - cannot synch ipod video with my itunes library
i just cannot get my ipod sync'd with my updated library.i have updated to itunes 8.0 and thought it may be a problem with my vista o/s.so i tried going back to v 7.0. but this did not help. my itunes library works fine..i can put new media on and pl
-
11gR2 installation problem on Windows XP
I use my laptop (Windows XP S2, with 2 GB RAM), name 'L3-ACH9M'. I login company network. From user account property, my account Group Member is others 'Administrator' (complete and unrestricted access to the computer/domain). I installed Oracle 11g
-
I'm trying to use an audiotechnica at2020 with 2008 imac. Neither usb or line input seems to work. Any tips?
-
Metadata not showing up in folders but on desktop only
When exporting photos from lightroom on to my desktop, I am able to view all the Metadata information when "getting information". However, that information does not show up when the photos are exported into individual folders within the computer. I a
-
Compatibility question and syncing
I plan to get a new laptop for work. Seeing as it will come with Mac OS X 10.5 Leopard and my iMac is running OS X 10.4.11 Tiger am I likely to have any issues with compatibility? Or should it work fine? I know that, in theory, it should be fine but