HT1212 What to do if you forget your password and have no idea what it is!?

help!

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

Similar Messages

  • What is the url when you forget your password?

    What is the url that needs to be entered when you forget your password to retrieve it?

    Can I just point out the obvious? (Well, it is to me at any rate!)
    If there was a URL that "needs to be entered" (I assume you mean a URL to be visited), in order to retrieve your password when you forget it, wouldn't that enable those people you know and wish to prevent getting in to your iPod (which - presumably, is why you put the password on it) to go to that same URL, get your password and use it to get into your Touch?
    Or is it me?

  • What to do if you forget your passcode and ipod is disabled?

    what todo if you forget your passcode and ipod is disabled?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    iOS: Wrong passcode results in red disabled screen
    iOS: Unable to update or restore

  • Repeating the message 'Did you forget your password? "message. Help

    When I try to login to the iTunes store or check my account I get the error message:
    *Did you forget your password? Your password was incorrectly entered numerous times and for your protection, you will need to retrieve it before continuing to use the iTunes store'*
    Of course I have followed the link, re-set my password, tried to log in and I get the message again - and again - and again
    the iphone works normally.
    any ideas?

    as you suspected, when you click on that "Did you forget your password" link on your local install, you're supposed to be taken to the screen where you can have your password reset to a system-generated value. after resetting the password, an email is then sent to the email address associated with that users record. having said this, can you let me know the URL to which that link is directing you on your local install (sending it to [email protected] would be great)? it sounds as if it's not pointing to the right place...for some reason. to be thorough, could you maybe include the url of the screen you're coming from as well? maybe there'll be a clue there as to what might be causing your issue.
    thanks,
    raj

  • What to do if you forgot your password and it says connect to itunes

    What to do if you forgot your password and it says connect to itunes

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • HT3180 My Apple TV is stuck on the "Did you forget your password?"  Apparently someone used the wrong password too many times.  How do I reboot this so I can sign on?

    My a Apple TV is stuck in"Did you forget your password?"  Apparently someone tried to sign on.  How do I reset this so that I can sign on?

    You will need to contact iTunes
    http://www.apple.com/ca/support/itunes/contact/

  • If you forget your passcode and do a restore will this gain access again to the unit?

    If you forget your passcode and a complete restore, will this gain access to the unit?

    Yes. For the screen-lock passcode you can restore from backup. You may have to place the iPod in recovery mode to do the restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Ifyou lost the Restrictions passcode yiou have to restore to factory defaults/new iPod.

  • HT4623 If you forget your password on your iPad, how do you unlock it?

    If you forget your password on your ipad, how do you unlock it ?

    https://discussions.apple.com/message/21773637#21773637

  • Do you forget your password ?

    Hi,
    How are you? I get problems with forget password. Can you help me please ? I want to help the user of my application to define another password, when he forget his pasword. I create a link "Did you forget your password ? " on page of connexion - page 101 of my application named 1500. But this link don't permit me to go to another page of this application. When I click on this link, I see the same page. Here is the link I create Did you forget your password.
    Can you help me for the differents steps I will follow to define a new password.
    Go to another page, reset the password, send an email for the user to define his new password.
    Thanks you.
    Sim.

    Why are you posting the same question over and over in different threads?
    DEFINE A NEW  PASSWORD
    PassWord
    Re: PASSWORD
    Scott has already tried to begin to help you and asked you not to cross-post all over the place:
    Re: PASSWORD
    - Mark

  • How do you get your ipad unlocked if you forgot your password and it became disabled?

    How do you get your ipad unlocked if you forgot your password and it became disabled?

    The instructions on this page should let you reset your iPad : http://support.apple.com/kb/HT1212

  • HT1904 what happens if you forget your password?

    hi everybody

    That depends on what the password is for. If it's the password for your iTunes account then you can try this link : http://iforgot.apple.com
    If the passcode to unlock the iPad then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may also need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
    If the code for Settings > General > Restrictions on the iPad then it will depend on whether it was in place on the iPad when you last backed up. If it wasn't then you can restore to that backup and it should be removed. If it was on the iPad when you last backed up then the only way to remove it is to reset the iPad back to factory defaults and you can then re-sync your content back to the iPad - you won't be able to restore to the backup as that will keep the code in place.

  • What do you do when you forget your password? I am trying to install photoshop and before a window comes up saying it's locked and I have to put in my password to continue. What password and what do I do if I don't remember it!!!

    Trying to install photoshop. I get a window that comes up with a lock icon under the Adobe icon and it wants me to give the computer permission to add photoshop so it's asking for a password. I don't know which password it wants and I fear I have forgotten my main password for this computer!
    I see to change your password, you have to know your old one. Any help out there?

    The Username and password required is that of an Admin User.
    If you only ever created your original account, that is your account and your password.
    If you auto-login, and never use that password so that you can't remember it, Your Mac is incapable of telling you -- it was encrypted as it was entered the first time, and is never stored "in the clear".
    You can change the Admin password, if you can remember your Apple-ID and password.
    OS X Mountain Lion: If your administrator password was not accepted
    (keep following the links until you get to the help that applies to your situation)

  • HT2527 How do you unlock your ipod touch if you forget your  password?

    I cant unlock my ipod and i forget me passcode and it says iPod is disadled connect to iTunes what do i do?

    Do as the manual says and restore the ipod.
    If you are unable:
    iOS: Unable to update or restore

  • How do u unlock the phone when you forget your password

    We can not remember the password & have been locked out of the phone. How do I unlock it?

    You have to connect to iTunes and restore in Recovery Mode. http://support.apple.com/kb/HT1808. Any data not backed up will be lost.

  • Can you update your ipod and have siri?

    Can you update your ipod touch to have siri ?

    No. Only the 5G has Siri. The other iPods do not have the hardware to satisfactorily support Siri

Maybe you are looking for

  • How do I make a Spry collapsible panel close by clicking a link in its content?

    People don't understand that they have to close a collapsible panel by clicking on the tab. I want to put the word "close" at the end of the content and have the panel slide closed. Example: http://www.canyonranch.com/miamibeach/our_services/

  • Equalization and Symbol Rate

    Despite my number of posts on this board...I swear that I am happy with my NI devices.... I noticed a peculiar thing today.  I am using some of the example programs to do some channel characterization.  The investigation is meant to be relatively sim

  • Updated N95-2(8GB)

    I just Flashed the mobile but still cant see auto screen rotate option in my tools/settings/general/personalization/display In my manual...its given that after Light time out...there shuld be Autoscreen Rotation option...It dint even come after flash

  • [Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".

    hi I'm trying to use foreachloop container in order to read the data that i have in several txt files and upload it into MRR table.  when i'm trying to run the package, i'm getting the following error:  [Flat File Source [2]] Warning: The system cann

  • WinRS running as 'NT AUTHORITY\ANONYMOUS LOGON' instead of passed in user

    I am trying to run a remote batch file using local environment variables.  To do so, I am calling cmd.exe within cmd.exe to evaluate the local environment variable within the command string. For example: WinRS -r:DEV002 cmd.exe /c "cmd /c "^%EPDIR^%\