HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.
After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.
Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?
Similar Messages
-
After a recent Firefox update, all the Bookmarks I had saved, disappeared. Also, I am unable to scroll down to see the sites I had already visited and saved. Now, when I go to a page I would like to Bookmark, I am unable to do so. I will click on Bookmark This Page but it does not work.
For the lost bookmark issue, see [[Lost Bookmarks]] and for the bookmarking issue, see [[Bookmarks not saved]].
-
when trying to print emails, I select "print", select the B110 that comes up on the printer list, then ask to print. I get a screen saying "contacting printer", then "preparing" then nothing....
I can print wirelessly from the laptops. All systems are on the same network. I have downloaded an HP Eprint app and try to print from there via Airprint, but again nothing. However, when I try to find a printer, nothing comes up from the search.
I am thinking maybe I need to alter settings on my iphone somewhere, but not sure. All was ok before the update...
please helpInstalling the new os may have tricked one of the three devices involved. If it used to work, it will again.
Reboot the printer. Reboot the router. On the pad, general, reset, reset network connections.
Make sure all the devices are on the same wifi network. Talk nice to it. -
I have been unable to use the copy and past command while using mozilla. the fucntion does work in windows IE, but I don't want to use windows. How do I restore or fix this function? I varies, works some days and not others.
See http://kb.mozillazine.org/Clipboard_not_working
Try to use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete -
What can I do to get this update to run properly? I need to use the service. I am up to date on payments, etc.
Refer below link
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html -
Desktop with Windows7. Tablet is ASUS Transformer. Both could sync before the mentioned changes.
I have a sync account with Firefox.
Other solutions like 'change password' or 'retrieve renewal key' not possible.It sounds like your desktop profile is (still?) corrupt; it's failing to process the wipe on bookmarks. So let's be super thorough: we'll clean up the desktop, then reconnect so the Android device's data will replace it.
My suggestion is to do the following. Read all of the steps before you start. I recommend that your Android device is on wifi.
# On your Android device, go to Settings > Accounts & sync. Remove your Sync account. Your Firefox profile will be unchanged.
# On your desktop, create a new profile.
# On the new profile, assuming you want to re-use your Sync account, follow the instructions below.
# Re-pair your Android device with the new desktop profile, and wait for it to finish syncing before syncing the desktop.
Connecting to an existing sync account:
# Set Up Sync
# I have an account
# I don't have the device with me
# Enter username and password, choose "I have lost my other device"
# You'll get a dialog with a new recovery key. Choose "Change recovery key".
Let me know if you have any problems! -
After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4
iPhone 4, same thing. It gets stuck at Step 1: backing up
-
After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad which is my working tool.
What should I do?Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?
-
Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck! -
I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?
iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
After doing an OS update, now iTunes stops playing music after playing a few songs.
After doing an OS update, now iTunes stops playing music after playing a few songs. Any thoughts about how to remedy this?
Same Problem here. Also, when this happens, it loses whatever album art was playing before. I've tried reinstalling and it doesn't help. Any ideas how to fix this? It's really annoying!
-
I just recently did an itunes update on my Windows Vista 64 and have been getting a runtime C++ R0634 error ever since. Per microsoft forum discussions, I have removed everything apple on my computer to get this runtime error to stop. When I tried to remove and reinstall itunes, I get an error message during installation and to try again. Has just become a cycle. Apple, are you working on this?
I have exactly the same problem. Got update notice from Apple for iTunes and getting the C++ runtime error R0634 ever since. I have no clue how to fix it....meantime, I can't even pull up Outlook to check email. HELP!!
ksware -
I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.
Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.
Troubleshooting issues with iTunes for Windows updates - MSVCR80
Maybe you are looking for
-
Cannot get correct print layout for multiple page/booklet printing
In trying to print a pdf file that is landscape, 2 pages per sheet, booklet format, I cannot get the print preview to show the correct layout. I have tried all the options in the print menu, but either I get the pages in the incorrect order or I get
-
Hello all, I'm having trouble with a parameter on a selection-screen. I have a field in which the user must enter a filename/path to a workstation file. The length of the parameter field is 128 (RLGRAP-FILENAME), but on the screen, the parameters app
-
How to suppress or modify CRM Billing default Split criterion
HI, Currently invoices are getting split based on the Incoterms and payment terms but the requirement is that system should not consider or split on incoterms and payment terms. How can i achieve this ? please guide me if u have the solution. Thanks
-
Cisco CSS 11150 Series switch and DNS Sticky
Hi, I have currently have two internet independent facing CSS11154 switches with two web server farm environment across both of them. I have a single URL that round robins between my internet facing links for these server farms. The application is ba
-
Why don't colored markers in Prelude keep their color in Premiere?
Just wondering why it is that when I choose a certain color for my comment markers in Prelude, Premiere automatically colors them green. Is there no setting in Premiere that would simply respect the colors I chose in Prelude for my markers?