HT1218 can I use the 7.3 firmware on my airport express?

can I use the 7.3 firmware on my airport express?
current version 6.3, but de airport express units are not "supported" by airport utility v6. seems that they like me to upgrade firmware?

Is it true that AIRPORT UTILITY V6 doesnt support this model?
Yes
However, you can use AirPort Utility 5.6 for Mac OS X Lion to configure the older Express.....and....your newer devices as well, so you might want to make that application your "go to" utility.
Keep both AirPort Utility 5.6 and 6.x on your Mac.

Similar Messages

  • Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

    Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

    Yes, that's one of the things airplay is for...

  • Where can you get the power cord for a 2012 airport express?

    Where can you get a power cord for a 2012 airport express or the equivalent? I couldn't find one in the online store.

    I'm sure the OP found his solution, but I wanted to share mine in case it helps some future seeker.
    There are a lot of brand new cords on eBay for less than $10 including shipping, which is way cheaper than the $39 stereo connector kit or an AC adapter from a retailer.  I just bought a used-like-new one for $5.50.
    The cord is made by Volex, part number APC7Q.  The Apple part number is M9573LL/A.  If the seller got it from the stereo adapter kit, they'll probably list it under MD836LL/A, which is the kit's part number.  I got the best search results on eBay using just the Volex part number.
    Best of luck!

  • Can I use MacBook as a base station and airport express to extend?

    I currently have my ethernet cable plugged in to Airport Express to provide WiFi in my house. However, the signal doesn't always reach upstairs. Can I plug the ethernet in to my Macbook downstairs and use the AE upstairs? Or how can I make the signal stronger upstairs?

    Can I plug the ethernet in to my Macbook downstairs and use the AE upstairs?
    Unfortunately, no.
    You are asking about configuring the AirPort Express to "extend" a wireless network from your Mac. It cannot do this.
    It can only extend a wireless network when you have another AirPort base station. In other words, it always takes a minimum of 2 AirPort routers to extend a wireless network.
    If you add another AirPort Express approximatel half the distance from your "main" Express and configure it to "extend a wireless network", you will have more wireless signal coverage upstairs. Here, I' am assuming that you have the "n" wireless versions of the AirPort Express.

  • Where can I find the Wi-Fi Specifications for my Airport Express?

    When I open up the airport utility is shows my airport extreme base station is 802.11n but that information does not show up when I click on the airport express. I would like to make sure my airport express is also 802.11n as I bought this in the first wave released.
    thanks for your the help.

    If your AirPort Express Base Station (AX) is Part# MB321LL/A or Model# A1264 then it is an 802.11n model.

  • Can you use a Ethernet hard drive on a airpot express

    Can you use a ethernet hard disk on a airport express?
    such as this one?
    http://www.currys.co.uk:80/martprd/store/curpage.jsp?BV_SessionID=@@@@1258649623.1206555836@@@@&BVEngineID=cccdadedjieihldcflgceggdhhmdgmj.0&page=Accessory&sku=306727

    More than likely this is NOT possible since most Belkin routers are NOT compatible with Apple's WDS.
    However if you are using a Belkin F5D7230-4 or F5D7231 you might be able to get it to work. You need to configure the Belkin and the AirPort Express (AX) to connect wirelessly using WDS. Only then is the AX's Ethernet port enabled.

  • Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

    Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

    Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

  • Can i use the laser jet printer P1102w with the i pad2?

    Can i use the P1102w printer with my i pad or i phone?
    This question was solved.
    View Solution.

    Hi,
    Your printer is Airprint Compatible with the latest firmware.
    Make sure your iPhone / iPad have iOS version 4.2 and above to support Airprint.
    Upgrade the printer firmware from your PC by using the tool below, by using the tool for your OS:
    Windows / Mac OS
    Then you will be able to print from the iOS built in Print function as long they are connected to the same network as your printer,
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Can I use the E2500 to extened my range to a wireless signal across the street ?

    What I have is a wireless internet signal that my neighbor has agreed to share with me, as I am currently not happy with the Hughsnet Sattelite ISP service I have.
    My connection right now is connected to the neighbors wireless 2.4Ghz wireless setup, but I am hoping to get a better signal/reception than the 3 bars I currently have. Current configeration consists of Windows 7 on a Pc, running wireless PCI network connection to the E2500 router, and I have added a Belkin N600 Dual Band Range extender to the other end of the house, hoping to get a better signal, reception to my Neighbors wireless signal.
    I am doing this backwards ? or do I need to add something, somewhere to improve my signal to that Wireless Network ?
    Thank you in advance,
    Manshoon

    Hi Manshoon,
    In establishing a good wireless coverage, make sure to put the router in a higher location or in a less interference area. The E2500 router doesn't have the capability to extend the wireless signal. What I can suggest is try changing wireless channels. You can use an application that will help you determine which channel is perfect for your network. Changing channels will avoid interference or conflict on any other devices that might cause getting a low signal. You can also update the router's firmware for better performance. 
    Help, learn and share

  • How can i use the amp designer or pedalboard for software instruments in garageband 10

    how can i use the amp designer or pedalboard for software instruments in garageband 10?
    and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?

    hongconga wrote:
    I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
    i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
    DRIVERS::
    No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
    (note "supported")
    and
    For the Mac::
    Mac OS X 10.4.11 – 10.7.1
    ask if their firmware currently supports OS X 10.9.x

  • Can i use the G-Technology G-DRIVE hard drive to extend my time machine capacity?

    I have a time capsule of 1TB but there are more MacBooks using it. So I would like to extend my disk space. Can I use the G-Technology G-DRIVE hard drive of 4 TB to do that? Another option is to buy a new time capsule of 3TB. What would be the best solution?

    If the MacBooks are only using wireless for backups as I presume you are, then the speed of USB is ok.
    But how old is the 1TB version TC.. ??
    It must be at least, 3-4years now.. as the 1TB model finished in the Gen3 TC and we are now up to Gen5.
    I really think if the TC has a crucial role in the network you replace before it breaks which tend to be sudden and fully dead.. rather than wait for it to fail.
    On the other hand moving the backups to an external drive on the TC means that you simply plug it into a new TC if it does break.
    Will the G-Drive work.. hmmm yes, but make sure you know the return policy of the store.
    Or order it from people who are Mac aware like OWC..
    Do not buy a raid box.. it should be a simple single disk. Raid versions will generally fail on the TC.
    4TB is no problem on the later firmware. Although I think value for money is better with 3TB.

  • Can I use the "same" button multiple times for multiple galleries?

    OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
    stop();
    next_btn .addEventListener(MouseEvent.CLICK, nextImage);
    var imageNumber: Number=1;
    function checkNumber(): void{
        next_btn.visible=true;
        back_btn.visible=true;
        if(imageNumber==15){
            trace(imageNumber);
        next_btn.visible=false;
        if(imageNumber==1){
            trace(imageNumber);
        back_btn.visible=false;
    function nextImage(evtObj:MouseEvent):void {
        imageNumber++;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();
    back_btn .addEventListener(MouseEvent.CLICK, backImage);
    function backImage(evtObj:MouseEvent):void {
        imageNumber--;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();

    I'm still a novice with Flash myself, but I have two comments.
    First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
    Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

  • I'm in the trial period for Creative Cloud - I have about 19 days to go on Photoshop CC on my iMac.  Can I use the same CC trial on a second machine?  Specifically on a Windows 7 machine?

    I'm in the trial period for Creative Cloud - I have about 19 days to go on Photoshop CC on my iMac.  Can I use the same CC trial on a second machine?  Specifically on a Windows 7 machine?

    Nothing personal to you or Rajshee, but this is exactly why I absolutely despise these "community forums" (not just Adobe but any company).  I called the Tech Support phone line today after digging and digging for a phone number, and they told me the exact opposite, and they did it a lot faster than it was possible to get a forum response.  (That's really not personal, because you can't control that, but it's a fact.)
    Their answer: As long as I'm signed in with the same ID, I can try, say, Photoshop CC on my iMac at home and also try Acrobat Pro CC on my Windows 7 machine at work.  Same account, same login, one trial.
    This makes complete sense to me as I'm financially on the hook (potentially) for the same package.  If I give away my login to someone else, which I wouldn't do, I'm still on the hook.  This is why the cloud approach to software is such genius and I applaud it.
    BTW, 99% of the "community forum" wrong answers come on Microsoft sites, so don't feel bad. 

  • How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

    I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

    Fred Tech wrote:
    Broadly speaking, it depends on the type of license you have.
    Specifically, if you have a single license then officially, you should only install it once on one computer.
    Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
    This is my understanding. I am happy to be corrected if I am wrong
    Fred
    Sorry Fred you are wrong.
    If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

  • Can you use the same Apple ID on more than one MacBook Pro for updates and applications?

    We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID.  Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine?  I'm not sure how that works when you have multiple machines.

    An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services.   So you can use the same Apple ID for up to 10 Macs associated with it.
    To create an Apple ID you need to enter  your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account.

Maybe you are looking for