HT1222 Can't update my ipad2 cause of this. What do I do.
This update contains improvements and bug fixes. My iPad says this and it needs to be updated. What do I do
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom
Similar Messages
-
HT1222 Can't update ipad. Error 1602. What do I do?
ITunes will not recognize the ipad now. How can I retstore and update?
I am running Windows 7 on the laptop.iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
You can update the iOS using wifi, i.e., not connected to your computer.
If you are not connecting to the internet via wifi:
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
I can not update the ipad2, I get the error: A problem occurred when downloading the software for the ipad2. It has been timed outwaiting for network connection
It is just busy. Go have dinner and try again later. Or tomorrow. If you are running windows, turn your firewall off. Sometimes that will cause time out issues. But i think your real problem is simply traffic.
-
I can't update my ipad2 to ios5. After 2 hours of what looks like a successful download and processing is about to begin, I lose connection and get message network timed out check network settings and connection, but I am still connected via wifi. Any ideas?
If you are using windows...
Try temporarily disabling your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
How can i update my ipad2 Version 4.3.5(8l1)help plz
How can i update my ipad2 Version 4.3.5(8l1)help no update appeared on setting general about .& is the version are the ios
If you are using IOS 4, you need to connect to iTune (computer) to update software.
http://support.apple.com/kb/HT4972 -
I can't update my IPAD2 to IOS6. I've tried through ITUNEs. I get a message after IOS6 is downloaded and extracted, to the effect of "could not backup the IPAD2 because the backup could not be saved to this computer." I've tried directly from the IPAD, and by connecting through ITUNES to two separate computgers. Can anyone help? Thank you.
However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.) -
I can not update my ipad2 and now only have the itunes symbol and connection cable showing?
I can not update my ipad2 and now only have the itunes symbol and connection cable showing?
Connect the iPad to your computer's iTunes. You have to restore your iPad now.
iTunes: Restoring iOS software
Read the kb article all the way to the end. You may need to use recovery mode. -
HT4623 How can I update my ipad2 software from 4.3.5 to 6.01?
How can I update my ipad2 software from 4.3.5 to 6.01?
See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
HT4623 I haven't got an option for software update? How can I update my ipad2
I haven't got an option for software update? How can I update my ipad2 to ios5.1
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Ok,I am looking to put MAC OS 10.5.6 on my 12" Al powerbook g4 1.5mhz w/ 1.25gigs of ram. I found a copy of 10.5.6 but the seller says that you can't update it to .8 is this true?
Before installing 10.5 make sure of the following: https://discussions.apple.com/docs/DOC-2275
-
I can't update becuase my mac says this, This software requires Mac OS X version 10.6.8 or later. any ways to update my iTunes?
You need to call 1 800 My APPLE and ask for Snow Leopord disk.
The cost is $29 I believe.
all iOS 6 OS and hardware announced (iphone5, new nanos, etc) require at least 10.7 version of itunes.
iTunes 10.7 requires OS 10.6.8 -
Can we update the android version of this phone?
Can we update the android version of this phone?
If your phone is running 4.0.4 Android version, software 7.02.605.10 710RD, sense 3.6, then it is on the latest available version of the operating system for the HTC Thunderbolt. There won't be another update.
-
I have PS CS5. It does not recognize .CR2 files from my new Canon PowerShot SX50HS camera. Can I update my CR plugin? To what version? Where can I get it?
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium -
Where can I download the iTunes64.msi driver. I can't update my current Itunes without this driver. I can't find it on Microsoft's website or Apple's website.
You can't download the individual .msi files, but they can be extracted from the setup.exe files if required.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
tt2 -
I can't update my ipad2 to ios 5.0.1
when I want to update my ipad2 to 5.0.1 in the itunes, the itunes show the error "this device isn't eligible for the requested build."
i can't understand what that means, and i want to find the help to solve this problem .
thanksTry this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
Cheers, Tom
Maybe you are looking for
-
where can i get this board? there are only 62 matches for it on google :( and i need it to be shipped to ireland/ uk.. any idea on how much they cost? whats the deal with single and dual cpu's? if i want to use it as dual processor do i need to buy 2
-
I can access AKO, but can not get to the Army's OWA at https://rw3.army.mil/Exchange/
-
I have CS2 active on an old MacBook and CS4 active on an old iMac. I used Migration Assistant to transfer from old iMac to new iMac and now CS4 won't startup, only produces a warning that there is a licensing problem. Tried Chat, but got no solution.
-
I've updated Adobe Reader to version 11.0.09 and it was discovered that the Advanced Search (Ctrl+Shift+F) reports back errors on all words searched inside PDF document/ Reproduce: 1. Use Adobe Customization Wizard XI 2. Create a MST file for the Bas
-
How to convert internal table data to PDF format
HI, I have an internal table data having one field with 255 chars. length.I want to send that intenal table data as attachemnt with external mail. i am thinking of converting that data into PDF format and use the FM to send the mail. How to conv