HT1222 Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

Natan turbo hadar,
I have the same exact problem.
I put an iPod shuffle on the Bose system, it plays just fine.
My iPhone 4s works just fine connected to my car stereo.
My iPhone 4s on the Bose will charge, it "thinks" it's playing, song shows, time line shows it's playing, can pause if I touch the phone's screen.
The remote for the Bose WILL NOT pause it, forward to next song, etc. It does work with the iPod shuffle.
So it's not the Bose, it's not connections, it's the iOS 7.1.1
Everything worked fine before, any one else have suggestions?

Similar Messages

  • HT1655 I have a 3rd generation shuffle.  It has stopped working with the earphones it came w/pinch buttons on the cord.  It will no longer advance to next song/change the volume.  Even with a new set of Apple earbuds, it does same thing.  How do i factory

    I have a 3rd generation shuffle.  It has stopped working with the earphones it came w/pinch buttons on the cord.  It will no longer advance to next song/change the volume.  Even with a new set of Apple earbuds, it does same thing.  How do i factory reset or fix the problem?

    Hello there, RufusChloe.
    The following iPod Troubleshooting Assistant should help with troubleshooting your issue:
    Apple - Support - iPod - iPod shuffle (3rd generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/shuffle3gen/
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I have also retarted twice...

  • HT4061 My iphone has stopped working but the lock button IS working...when it stopped working it had a 50% charge left on the battery...it simply went to a black screen and will not turn on...my phone will not charge on the computer or the plug socket

    Hi
    My iphone 4 has stopped working...the lock button IS working...when it stopped working it had a 50% battery remaining...it was working when I last used it and when I returned it had a blank screen....it will now not charge or connect to itunes when plugged into the computer and it will not charge on the plug socket....I think the last iOS op system updated was 5.1.1....please help

    Try holding both home and power buttons until apple logo appears (ignore on/ off slider) and then let go. No data will be lost.  Wait for phone to restart

  • My iPhone 5 stopped working with my 2015 Subaru Outback after the iOS 8.1.3 update

    My iPhone 5 stopped working with the USB connector on my 2015 Subaru Outback. The phone will still charge, but the message is something like "this iPhone will not work with this accessory". Is there a fix being made? I saw others post with issues with the latest update. It worked fine with the prior iOS version 8.1.2

    Hello bballfan85,
    It sounds like your getting an error message that the iPhone isn't going to work with your Subaru all of a sudden over USB. I would use these troubleshooting steps from this article, named:
    If you need help with iPhone, iPad, or iPod touch accessories
    Update your software
    Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.Disconnect and inspect the accessory, then restart your device
    Disconnect the accessory and turn it off, if possible.
    Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
    Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
    Try a different device
    Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
    If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
    If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
    If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
    Restore iPhone, iPad, or iPod touch
    Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    These steps will help you troubleshoot the iPhone side of the equation.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT1600 After updating my apple tv last night, it has stopped working. The light blinks but there is no input to the tv. I have reset it multiple times, have unplugged it, and it still doesn't work. What can I do?

    After updating my apple tv last night, it has stopped working. The light blinks but there is no input to the tv. I have reset it multiple times, have unplugged it, and it still doesn't work. What can I do?

    connect it by usb to your computer and restore it's firmware from itunes on the very same computer

  • IPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

    iPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

    you have two kickers in there.
    Cheers
    Pete

  • Hello friends, my itunes has stopped working. and the problem report stated the following: Fault Module Name:     KERNELBASE.dll   Fault Module Version:     6.1.7601.17514.................. please can anybody help me?hello friends, my itunes has stopped w

    Hello everybody> my itunes has stopped working and the problem report stated the following:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    10.5.3.3
      Application Timestamp:    4f14cc3d
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7601.17514
      Fault Module Timestamp:    4ce7b8f0
      Exception Code:    80000003
      Exception Offset:    0003381b
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    can anybody help me?

    Are you seeing a similar message when launching QuickTime Player?
    What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
    Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • TS1559 I have iPhone 4s, after i updated my software to 7.0.4 my wifi stopped working. The wifi icon at the top is gone. Its annoying that i have to us my data all the time. I've tried the network reset, it didn't work.

    I have iPhone 4s, after i updated my software to 7.0.4 my wifi stopped working. The wifi icon at the top is gone. Its annoying that i have to us my data all the time. I've tried the network reset, it didn't work. My phone works fine, just a lilttle bit slow before i upadated to 7.0.4. And now not only the wifi, the phone itself is slower than ever. I wish i didn't udgrade to iOs 7. There's too much problems. There's this one time that I can't send iMessage at all.

    Hi s.kouris,
    I'm afraid that unless you are able to contact the previous owner and have him wipe the device, or provide you with his Apple ID password so you can delete the iCloud account, you are out of luck.
    With iOS 7, an Activiation Lock was added to deter thieves. This lock prevents anyone but the owner of the device from deleting the iCloud account and restoring the device:
    http://support.apple.com/kb/ht5818
    Unless you are able to reach the original owner and get the device wiped or the iCloud account deleted, you are stuck with a brick.
    Sorry,
    GB

  • After i upgrade to ios 7.0.4 my iphone didn't work, only show a apple logo then dissapare again, and it happed almost a hour.

    after i upgrade to ios 7.0.4 my iphone didn't work, only show a apple logo then dissapare again, and it happed almost a hour.

    Try a reset by pressing and holding the home and power buttons for 15-20 seconds.
    If it still does not boot up properly, put the device in DFU mode (google it) and restore.

  • Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

  • When is the iphone map going work with the newest IOS

    Whe is the iphone map going work with the newest IOS?

    Sorry. This question doesn't make sense. It works just fine for me right now. Maybe you'd like to explain what your problem is...

  • Every time I TRY to start firefox 18-19 I get an error message : Firefox has stopped working - close the program and check online for a solution - or - close ..

    Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.
    I have tried a Clean reinstall but it did not help.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • IPhone 4 stop working with ios 6.1

    iPhone 4 stopped working with ios 6.1, visited apple first time, restored phone and worked, less than 24 hours later stopped working again, back to the store, I told iPhone is out of warranty and they'll replace for $150. iPhone worked fine with previous version, no problem at all. Asked to restore to the previous software version, told can't be done. Why should I pay for a damage caused by a software update. Tec claims that ios 6.1 will not work with my phone because it discovered some hardware malfunction, possible the home button. They can't repair. suggested to go to a third party. I'm a satisfied Apple product user for many years. What happened? Any welp out there?

    Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
    Anyways after about 18h of search and stress I came across this link:
    http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
    That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
    Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
    When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
    Well hope that will work for you like it did for me

  • My ipod touch has stopped playing through my Sony docking station, It only plays through i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

    My ipod touch has stopped playing through my Sony docking station, It only plays through the i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

    Have  discovered that I had not in fact updated the ios!!
    Went through the process last night and my ipod now works fine on my docking station.
    Thank you very much for your advice.

Maybe you are looking for

  • Passing split array to function

    Anyone know how to pass an array to a function as seperate parameters i.e _array = [param1,param2,param3] functionToCall(param1,param2,param3) instead of: functionToCall(_array[0],_array[1],_array[2]); of having to go var1 = _array[0]; var2 = _array[

  • How to reduce the database size after deleting huge amount of rows?

    Hi, I have a large database. I removed almost half of the data/rows. Now i need to reduce the size of the database file as I need more disk space for the database file. What should I do in details please. Thanks.

  • Changing Page Size

    I created a layout for an invitation on an 8.5x11 size page, though would like it to be 5x7. Every time I change the page layout to 5x7 the page size changes but cuts out half of my work. Is there a way to change the page size that will also scale th

  • Current session language in reports HR_ALL_ORGANIZATIONS_UNITS_TL

    hi The current session language of application is not in English, but when i execute the report it is displaying English values for organization name which are taken from HR_ALL_ORGANIZATIONS_UNITS_TL. Is there any possibility to take data which belo

  • Links in Dreamweaver

    Hi, I've just finished making a website for fun, which looks great thanks to Flash and Dreamweaver! Anyway, I was thinking of using it as a desktop background (Windows XP active desktop web page), and linking things like my folders and files to my ta