HT1222 how to activate siri in iphone 4

I Have installed the new IOS 6.1 software version in my iphone 4. how can i activate the Siri app?
Thanks

There is no siri on the 4.
Its only available on the 4s, 5 , ipod touch 5g, and ipad 3 and ipad 4.

Similar Messages

  • Does anyone know how to activate siri with a button on a 2011 Chevy Silverado that has blue tooth.  Also I'd like to know how to sync my iphone contacts with this same truck.

    does anyone know how to activate siri with a button on a 2011 Chevy Silverado that has blue tooth.  Also I'd like to know how to sync my iphone contacts with this same truck.

    Hold down the mute button on the steering wheel until you hear,"Ready" and then say "Voice". That will bring up Siri.

  • How to activate hotspot in iphone 4S

    How to activate hotspot in iphone 4S. I am using BSNL Network in India

    I use BSNL carrier in iphone 4, but can't able to set only "INTERNET TETHERING" setting as below.
    I called many times BSNL but they can't understand situation. How to resolve this carrier problem in HOTSPOT?
    CELLULAR DATA
    APN                   bsnlnet
    Username          Leave blank
    Password          Leave blank
    MMS
    APN                              bsnlmms
    Username                      Leave blank
    Password                       Leave blank
    MMSC                           http://bsnlmmsc.in:8514
    MMS Proxy                    10.210.10.11:8080
    MMS Max msg size        102400
    MMS UA Prof URL          Leave blank
    INTERNET TETHERING
    APN                    bsnlnet
    Username          Leave blank
    Password           Leave blank

  • How to activate MMS in iphone

    How to activate MMS in iphone ? Plz help

    Got to Settings>Messages>MMS Messaging>ON. Also check with your carrier to ensure they have enabled MMS sending/receiving on your account.

  • HT204389 how can install siri on iphone 4?

    How can install siri on iphone 4?

    As you can see here, Siri requires an iPhone 4S or later.
    http://support.apple.com/kb/HT5457
    It says the same thing in th eHT4992 article you attached.
    Siri cannot be installed on an iPhone 4.

  • Does anyone know how to download Siri onto iPhone 4 as I don't have the iPhone 4s I do have ios5 on my phone

    Does anyone know how to download Siri onto iPhone 4 I have right op system and don't have iPhone 4s

    The Huntress,
    I am aware of the Terms of Use of this forum.
    On the contrary I suggested NOT to go on that route.
    Didn't provide support didn't discuss, just mentioned.
    Also mentioned the risk of losing warranty, performance and battery life.
    Our friend Vince will probably find a solution like the one I mentioned and that's the reason I mentioned that there is availabl, BUT NOT recommended.
    I am not an native english speaker, but I think it is quite obvious that the post is against jailbreaking.
    Cheers.

  • How to activate bluetooth on iphone 5s

    how to activate bluetooth on iphone 5s

    try this one also. . thanks
    Personal Hotspot
    Use Personal Hotspot to share your iPhone Internet connection. Computers can share your
    Internet connection using Wi-Fi, Bluetooth, or a USB cable. Other iOS devices can share the
    connection using Wi-Fi. Personal Hotspot works only if iPhone is connected to the Internet over
    the cellular data network.
    Note: This feature may not be available with all carriers. Additional fees may apply. Contact your
    carrier for more information.
    Share an Internet connection. Go to Settings > Cellular and tap Set Up Personal Hotspot—if it
    appears—to set up the service with your carrier. Chapter 3 Basics 34
    After you turn on Personal Hotspot, other devices can connect in the following ways:
    • Wi-Fi: On the device, choose your iPhone from the list of available Wi-Fi networks.
    • USB: Connect your iPhone to your computer using the cable that came with it. In your
    computer’s Network preferences, choose iPhone and configure the network settings.
    • Bluetooth: On iPhone, go to Settings > Bluetooth and turn on Bluetooth. To pair and connect
    iPhone with your device, refer to the documentation that came with your computer.
    Note: When a device is connected, a blue band appears at the top of the iPhone screen. The
    Personal Hotspot icon appears in the status bar of iOS devices using Personal Hotspot.
    Change the Wi-Fi password for iPhone. Go to Settings > Personal Hotspot > Wi-Fi Password,
    then enter a password of at least 8 characters.
    Monitor your cellular data network usage. Go to Settings > Cellular. See Cellular settings

  • Activate Siri in iPhone 4s

    How do I activate siri on an iphone 4s I bought it yesyerday and I dont know what to do

    First, go to:  Settings > General > Siri On
    Then press and hold the home button and speak after you hear the prompt sound.

  • How to activate 4G in iPhone 4S

    How can I activate 4G in iPhone 4S?

    Already answered in your other post:
    https://discussions.apple.com/thread/5119856?tstart=0
    Posting again will not change the facts.

  • How can idownload siri on iphone 4

    How can I download SIRI on iphone 4 md128pp/a?

    May050789 wrote:
    How can I download SIRI on iphone 4
    You cannot... Siri requires an iPhone 4s or later.

  • How to activate factory unlocked iphone 3gs with os 4.0

    i have bought a factory unlocked iphone 3gs loaded with latest os 4.0 in usa for $850 , but i am unable to activate it over itunes.
    I want to activate it without at&t sim as its factory unloacked.
    Can anybody give me the process or any reference links on how to activate it.
    Thanks in advance,
    Pavan Raj.

    pavanraj wrote:
    iphone 3gs loaded with latest os 4.0
    If the iPhone had the 4.0 Beta loaded on it, the iPhone needs to be registered with a developer for the iPhone to even function. If it's not registered and the beta is installed then it is a brick. Regardless of if it is registered or not, as Tamara said the iPhone 4.0 Beta has no support. The Beta is a beta and is for developers who are developing apps. That way they can release apps as soon as the OS 4.0 is released sometime this summer. You should get an error message saying something along the lines of this phone is not registered with a developer, if the iPhone is not registered.
    pavanraj wrote:
    I want to activate it without at&t sim as its factory unloacked.
    If it is unlocked by the carrier then you just need to plug it into iTunes with a SIM card from a compatible carrier. If you get a message saying that the SIM is not from an authorized carrier, well then the iPhone is not unlocked, sorry.
    If the iPhone is not unlocked you are really out of luck. While there are ways to hack an iPhone to unlock it, there are no methods for the 4.0 Beta to unlock the iPhone, and even if there is a way to hack it to unlock the iPhone 3GS on the 4.0 OS, it won't come for a long time.

  • How to activate Factory Unlocked iPhone 3GS

    Hello Folks,
    My friend got me an iPhone 3GS from Hong Kong (Model MC131ZP/A); and I am in India. This is the chain of events and the final problem.
    1. When I first opened the iPhone I could see the home screen and use my SIM in India. Though there was no app for Camera or Compass etc on the home screen.
    2. First time iPhone connected to iTunes and it told me that the OS must be updated. I went ahead.
    3. I updated the OS to 3.1.2 (05.11.07).
    4. After that it is not able to recognize the same SIM telling me that Invalid SIM.
    5. I check the Serial Number of my phone on Apple Support site and it says that iPhone is not even activated.
    6. I have tried contacting Apple support via mails etc. but no response at all.
    I am not able to understand how it worked in the first place. Did the seller in HK unlock it using some kind of software? He should not if it is an Factory Unlocked phone. Are all the MC131ZP factory unlocked?
    Can someone please help me on how to activate the phone or what is going wrong here?
    Thanks in advance.

    pavanraj wrote:
    iphone 3gs loaded with latest os 4.0
    If the iPhone had the 4.0 Beta loaded on it, the iPhone needs to be registered with a developer for the iPhone to even function. If it's not registered and the beta is installed then it is a brick. Regardless of if it is registered or not, as Tamara said the iPhone 4.0 Beta has no support. The Beta is a beta and is for developers who are developing apps. That way they can release apps as soon as the OS 4.0 is released sometime this summer. You should get an error message saying something along the lines of this phone is not registered with a developer, if the iPhone is not registered.
    pavanraj wrote:
    I want to activate it without at&t sim as its factory unloacked.
    If it is unlocked by the carrier then you just need to plug it into iTunes with a SIM card from a compatible carrier. If you get a message saying that the SIM is not from an authorized carrier, well then the iPhone is not unlocked, sorry.
    If the iPhone is not unlocked you are really out of luck. While there are ways to hack an iPhone to unlock it, there are no methods for the 4.0 Beta to unlock the iPhone, and even if there is a way to hack it to unlock the iPhone 3GS on the 4.0 OS, it won't come for a long time.

  • How to activate a used iphone 4 from ebay?

    I'm thinking of buy a iPhone 4 for verizon on ebay and I'm confused on how to activate it onto my account after i get it. could I go to a verizon wireless store and they activate it for me? Please Help!!!!!

    yes verizon will activate it for you.  as long as it is a verizon phone.  id be a little careful dealing with ebay, so you dont get ripped off.  make sure you know what you're buying.  you can also have the person(s) send you the ESN number, then call verizon (might be a website also ?) to make sure it is legit.

  • I have lost my Iphone and want to know how to activate "find my iPhone"?  App on my Air book mac

    I want to know how to activate the app "find my iPhone" in this air book mac.  I have to app down loaded on this machine as well as my iPhone and havent got a clue how to get it activated through "I Tunes"....Can I get some advice?

    First of all, your lost iPhone should had been enabled the 'Find My iPhone' before you lost it.  If disabled, then there is nothing you can do to find the lost iPhone.
    If your iPhone was enabled in 'Find My iPhone', then click the app 'Find My iPhone' in your airbook mac.  It would prompt yuo for an Apple ID and its password.  Key-in the Apple ID and password of your lost iPhone.  Thereafter, use the Map to locate your iPhone's whereabouts.  This function only works when your lost iPhone has been turned on and with either WIFI connection or 3G internet connection.  Otherwise, this said app does not work.

  • HT1222 how do i update my iphone 3 and does it cost ?

    how do i update my iphone 3 with iOS

    the last version for the iPhone 3G was about 4.1.  There is no update path beyond that without doing some sort of hack

Maybe you are looking for

  • Creation of RW Table

    Dear Friends, I am planning to create a New report by using report painter, for that i am planning to arrange the required data by creating RW Table for assigning it to Rw -library. I have created Z Table but while creating the library when i am tryi

  • ? How do I delete large blocks of empty space with Adobe Acrobat Pro?

    How do I delete large blocks of empty space with Adobe Acrobat Pro?

  • Idea for new release of firmware RM-217

    Fix should turn the light of the keys off when you play videos,because it stays always on consuming battery. Another fix would be a way to choose how many colors for the screen like 64k,262k,or 16M just to safe battery. I dont know if the can do that

  • Planning on assembly

    Hi , I need advice on following scenario. There is Finished product which i sold .The assembly for this is kept in stock . There is requirement that the sales order from FG should consume the PIR of assembly. The consumption can be at GI of sales ord

  • BOXIR2 SP4 Error - Specified directory does not contain an installation

    Upgrading from BOXIR2 SP3 to SP4.  Cannot get past the 4th screen (where it asks for installation directory).  I do have an existing installation but the install does not see it.  Please advise.