HT1222 I cannot update my iPad system.

What should I do for this problem?

This tells you how to update:
http://support.apple.com/kb/HT4623
If you have been having issues, I suggest scrolling down to the "Update your device using iTunes" section.

Similar Messages

  • Can i use my emac to update my ipad system?

    can i use my emac to update my ipad system software?

    If you mean iMac yes you can use it to update your iPad but it appears your iPad has  already been  updated.

  • HT204204 i cannot update my iPad because there is no option of update in my ipad

    I cannot update my iPad because there is no option of update on my iPad

    If you are really running iOS 4 there would not be that option, it was added in iOS 5. Connect your iPad to your computer and update it in iTunes.

  • Hi I cannot update my iPad 2 to 5.1

    Hi I cannot update my iPad 2 to 5.1

    UPDATING iOS
    Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
    The following link explains how to update
    This link explains  how to update using iTunes
    This explains how to transfer purchases to your computer

  • HT1918 cannot update payment info system is blocking it

    cannot update payment info system is blocking it

    I think that the expiry date will be shown as asterisks, and I don't think that the security code will be re-displayed either (similarly only part of the actual card number is displayed) - just in case somebody gets access to your iTunes account then they can't see your card details. If you aren't getting any error messages when you've entered them then that implies that iTunes has accepted them as being valid.

  • I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?

    I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?
    Thanks,
    glhiker

    Hi glhiker,
    I understand that you may be having some issues with your ability to update your iPad. Here is an article that references your error code and can help you take some steps to resolve it:
    Resolve iOS update and restore errors - Apple Support
    http://support.apple.com/en-us/TS3694
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT4623 why I cannot update my ipad from 5.1.1 to latest versions? Some of the apps wouldn't work on the 5.1.1 .  To buy a new ipad,would be a rip off .

    why I cannot update my ipad from 5.1.1 to latest versions? Some of the apps wouldn't work on the 5.1.1 .  To buy a new ipad,would be a rip off. What is the solution?

    The original iPad does not have the memory and processing power to run more recent version of the iOS. 5.1.1 is the latest it can run.

  • HT1338 Why i cannot update my ipad?

    Why i cannot update my ipad?

    Are you sure you have an iPad 2?
    Do you have a camera?
    The current iOS for iPad 1 is 5.1.1.
    If you have an iPad 2 then connect it to iTunes.
    How to update your iOS device
    Scroll down to the “Update your device using iTunes” section

  • Cannot update my iPad

    I cannot update my iPad. I click to download and install, then agree to the terms and conditions and it gets stuck on estimating time remaining. I have 6 app updates and can't apply half of my app updates.

    If you don't have a stalled download in iTunes, then try this now. No guarantees, but I have seen it work in the past
    Go to Settings>Store>Apple ID. Tap your ID and sign out. Now restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store and sign in again. See if you can start one of the updates. Only tap on one icon, and see if that starts the download again.

  • How do I delete apps when I cannot get the red x, I cannot update the iPad because of lack of memory space. I heard it was a bug in the last version of the op.system, any ideas?

    I cannot update the iOS because of lack of memory (3.5 GB required). The apps cannot be deleted because I cannot get them red x in memory management or when they shake for reorganization. I heard this was a bug in the last update of the op. system. So what is the process?

    From where did you hear this..?
    Lockie555 wrote:
    I heard this was a bug in the last update of the op. system.
    DELETING APPS
    Touch the app and hold your finger down until all the apps start to jiggle. You will see a circled "x" in the upper left corner. Tap it to delete an app. When done press the Home button.
    You cannot delete any pre-installed iOS app.
    If there is No 'X' on any apps you have Downloaded... then check in Restrictions...
    Settings > General > Restrictions
    Understanding Restrictions  >  http://support.apple.com/kb/HT4213
    Lockie555 wrote:
    I cannot update the iOS because of lack of memory (3.5 GB required).
    Alterrnatively you can update using iTunes on the computer you usually sync with.
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    NOTE:
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Cannot update an iPad os to 3.2.2

    I asked one of my friends to buy an iPad for me. He bought one and installed a few iPad applications for me before he handed it over to me. The problem is, after I got the iPad, it looks I cannot update it to the latest os version - iOS 3.2.2.

    Unless the app were bought under your iTunes account, when you sync the iPad to your computer the contents of the iPad will be erased and replaced with those in the iTunes on your syncing computer.

  • I need to update my iPads system how do I do it?, I need to update my iPads system how do I do it?

    I need to update my system on my iPad how can I do that?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • I cannot update itunes because system cannot find the data itunes64.msi. What can I do?

    I cannot update itunes because the latest version cannot be deleted (system is looking for itunes64.msi and cannot find). Update is going reverse. I tried to install the full version, but there is the same problem. What can I do?
    When I try to deinstall the old version by windows, the same problem

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Cannot update original iPad to iOS 5

    I tried this over and over with no luck. It says iPad cannot be restored or the device isn't eligible for requested build. Any ideas

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT1222 i cannot update my iOS 5.1

    Hello....i cannot update my iOS 5.1 it keeps sending error....

    I found the answer! I quit Dropbox!
    My iPad updated to iOS 5.1 just fine (invisibly, even: iCloud) but my iPhone 4 wouldn't, even though both are on my same home network. Even plugged into my MacBook Pro, it wouldn't update the phone—until I quit Dropbox! Then I went straight over to iTunes, clicked my phone under Devices (left-hand pane), and clicked the Update button in the center of the main pane. The download started right away.

Maybe you are looking for

  • My iphone 3 8gb will not update and is stuck on 4.2.1 anyone help??

    can anyone help me with my iphone 3 8gb it will not update and is stuck on 4.2.1, everytime i stick it on itunes it just moves the update to a later date everytime, so anyone if you can help me i would be grateful thanks.

  • 802.1x machine auth w/ certificate authority

    Two quick questions ... I am building a lab for 802.1x, I want to use peap w/ mschap v2 and I want to do machine authentication only.  I have AD and CA services running on a test windows 2003 server. I have ACS setup, my AD is connected, my switch is

  • App Store can't find any updates? No response from server.

    When I open iTunes I get a message saying "a new version of iTunes is ready for download". But when I click download/update it takes me to App Store where it can't find any updates. It keeps saying "Didn't get a response from the Software Update serv

  • Numeric field limit length to visible area

    I have a pdf saved as Dynamic XML Forms with a numeric field checked to limit length to visible area, but the "limit to visible area" option does not work. If save the same pdf as Static Form works fine. Can someone provide an example or tell me how

  • I don't see an itunes store menu on new version of itunes

    So itunes won't let me rent a movie because it says I haven't authorized my computer. It says to do so I have to go to the store menu, and hit "authorize" but I don't see the store menu anywhere on this new version of itunes.  Please Help.