HT1222 iPhone 4s updating to 7.1.1, asks for pin , have no idea what pin or how to get it
How do I get the pin that the new iOS 7.1.1 asks for when installing ?
Try this help article out:
Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Similar Messages
-
I have 2 lines that the contracts are expired. I see that I can set an appointment, have them set up the iPhone of choice to my Verizon account and it even says that they will give me any product upgrade benefits. I find this hard to beleive. For one of the lines i have a product upgrade of $50 (Verizon calls it New Every Two which they did away with but still offer it to people who had it and did not use it yet). On my other line there is a $35 product upgrade. I can't beleive that Apple would give these product upgrade rewards( the $50 for the one line and the $35 for the 2nd line)
does anybody know how to tell if someone is with a carrier like Verizon, how to figure out what kind of iPhone package I should get so Verizon can't get me for going over my ;allotted minutes, text messages, internet usage, etc. I have never used a smartphone so I have no idea how to tell what kind of package I need for the iPhone. anybody else know? I saw that Sprint has a package that is "unlimited with all 4 services like text messages, internet usage, calls, etc for $99/mo. is this still the case? Verizon does everything they can to rip you off and charge you for going over. I have not been able to figure out how I can tell when I am getting close to going over. is there an app to tell this?
Any suggestions about getting this servic where apple sets it all up, teaches you how to use the phone, gives a decent warranty and offers applecare. any other carier that would be better? I heard that the unlimited data transfers does not mean "unlimited" but they still put an amount on the unlinites and if you go over you get docked. I hate Verizon.I should say before everybody else does I never learned how to type and barely learned how to write and spell so I probably should have done this some other way. Sorry.
-
I have a MBP running Lion 10.7.3 and was importing some photos in to iPhoto '11 9.2.3 and thought I'd look at my mail. I opened it up, iPhoto got quit unexpectedly and the next thing I know my email inbox is empty, except for one "Apple iPod Antitrust email."
My email is on iCloud and I have look at my mail through browsers and my iPhone. The old emails are not there.
I have no idea what to do or where to start looking.
Help!Hello SHEFE
If iTunes did not have anything in it after the update, there is a way to go back to what it was before. The steps are located in the article below.
No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am trying to update my iPhone but it seems that I have to many photos and music because I received the following message: The iPhone could not be updated; this device is not elegible for the requested build. Does anyone know how to fix this?
You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.
-
i have purchased a iphone 4s second hand used and when i tried to update its software, it is asking for apple id . i dont have contact with the person to whom i have purchased this device now what should i do
You can't do anything. You have encountered the activation lock. Unless you have some sort of contact with the previous owner you have bought a very expensive paper weight.
You can find out more about activation lock from Apple's site here: Find My iPhone Activation Lock - Apple Support -
I updated my iPhone 5s to the new iOS 7.1 and now I have a little icon that I have no idea what it is it up in the same corner as my battery
Maybe you could describe what the icon looks like?
-
My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.
Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy -
this morning i tried to restore my ipod and it said:"the ipod "ipod cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavalible." i have no idea what to do and i need help.
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
This afternoon I was used my iPhone 3G. I then put it aside (it was left on) for about an hour. When I went to use it again, nothing happens. The home button will not call up the lock screen. The lock button will not turn the phone on, off, or lock it. When I plug it into iTunes, it recognizes it to sync. Also if someone tries to call me it will ring on their end, but nothing on my end.
The iPhone is over two years old (purchased in April 2009), so it is out of warranty. Also, everything is up to date on the iPhone.
Does anyone have any idea what the issue might be?
Thank you in advance.
ShannonWhat iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
I have no idea what to do please help me!
Source: http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Locate a Service location: https://locate.apple.com (choose your country in the top right)
Call Apple for Mail-in Service (if available): http://support.apple.com/kb/he57
Set up service on your own or check options: https://selfsolve.apple.com
Questions about service and potential costs: http://www.apple.com/support/service/ (Choose your country after selecting your product) -
I have an iPhone 4S I've been useing a sever for awhile now. Downloaded new iOS now I'm getting 403 forbidden when trying to look up anything from the server. Regular 3G works. How can I fix so I can use the server?
Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.
-
I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes. I'm being asked for a password to get into my phone and the old password I had doesn't work. I don't know what password it's looking for
Thanks for replying, I'm a real techno-cretin. What do you mean by not using the backup? I'm busy trying to restore my new phone and it's doing a 6 hour download with updates. Can I restore the data from my old phone backup onto the new iPhone 4S when the download is done?
-
Help
TheresaDances wrote:
It isn't the same. I can use all the options on the apple site and it finds my new id.
New ID?
Is there some reason you created a new AppleID?
Why don't you simply continue to use the same AppleID you had?
The 4 ID IS something I made up in the store the day I bought the phone. I have no idea what the id is.
You had an iPhone for 2 years and you never got anything from iTunes or never enabled any features of the iPhone? -
I updated my iTunes as it asked me to and then restarted my computer but iTunes would not open as it said it was corrupted. In addition as I was downloading the new iTunes a PC speed maximizer was downloaded onto my computer and I have no idea what for.
Grappler1261 wrote:
I updated my iTunes as it asked me to and then restarted my computer but iTunes would not open as it said it was corrupted.
See Install & Update here > http://www.apple.com/support/itunes/install/
Also see Downloading Content in the same link. -
I have two apple id's and one I cannot remember the password so I made a new one but to update my apps it still asks for the old password... How do I update my apps?
All content and data is forever associated with the Apple ID you used to download it. You should have reset the password for the original I'd.
I forgot.apple.com
Maybe you are looking for
-
Movies I've purchased on my iPod Touch don't show up on the device anymore
I've downloaded several movies from iTunes on my iPod Touch which no longer sync. They still show up on my MacBook Pro and in the sync screen on my laptop but I can't get them to show up on my iPod? What am I doing wrong?
-
.ai overload in Indesign (CS5.5)
We have an InDesign document that is comprised of a few dozen Illustrator line drawings (garments) that have been built individually using layers and are viewed/imported in InDesign through import options and turning off/on said individual layers. T
-
How to use Adobe Reader, open pdfs with OS X 10.6.7?
I just got a new MacBook Pro. When I try to download Adobe Reacer or open PDFs, I get messages that say this type of Mac doesn't support Adobe Reader. I use PDFs all the time. How do I get around this?
-
I am using Crystal XI This report is grouped by ItemNo and I want to show a total of the Length column per ItemNo Length needs to be a string field, SUM won't let me use a string type field and it won't let me convert it using CDbl, Val or ToNumber.
-
How to make the appliance work?
Hi guys I hope you can help me, i have little knowledge in administrating and networking issues. In order to find the easiest way to try livecycle I have installed the VM ware appliance and it seems to work. The appliance is installed on my desktop