HT1222 Just upgraded now my touch screen won't work?

Just updated iOS to 6.1.3.
Now my touch screen won't respond..?

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

  • HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

    IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
    It might have happened when I was accessing my camera bypassing the lock screen!
    All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

    I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

  • HT201406 What do I do if my Ipod touch 4 will turn on, but the touch screen won't work so I can't unlock it?

    This has happened 3 times... my Ipod touch 4 will be fine one minute,but then the next time I turn it on the screen won't pick up when I touch the screen it wont pick it up. I can't unlock it or completely turn it off becasue the touch screen won't work, but I know it is still alive becasue when you press the home button my lock screen turns up. if you know how to fix this bug please tell me how.

    Did you try to connect in recovery mode and set it up as new device?
    iOS: Unable to update or restore
    How to back up your data and set up as a new device

  • I restored my ipod touch, and now the touch screen refuses to work

    my ipod touch recently said it needed activation, although I've been using it for 18 months now. When I connected to Itunes, it said it could not read the contents of the Ipod, although it did read the model number and other details. It said to restore it to the factory settings, which I did. after restore, the touch screen refused to work. after 24, it began working, but then said it needed activation again. Hook up to Itunes, same song and dance. It is frozen again. Has anyone else had t

    You should take it to the nearest apple store to let them restore it and activate it. iTunes wouldn't dare restore my ipod touch everytime i tried to restore always an error. So the next day i took it to apple and they fixed it.

  • Touch screen won't work, and it's on lock

    I have this ipod that I've been trying to fix for someone, as well as load up songs from itunes. I've successfully synced songs to it to it's full capacity (8G). However, when it was done, I ejected it and tried to listen to it to see if it was working properly. The screen is locked, as well as the touch screen isn't working as if it's completely dead. I've never had this problem as I am familiar with Ipod Touches and Nanos. Does anyone have any remedies or suggestions?? Gonna try other things in the meantime.

    Hi Wazzup483, Im having the same problem you had. Screen locked, touch screen not responding and it won't stop playing music. It licked while I was listening to music. Took out my pocket and it was locked, guess I hit something.
    HELP :o)
    Thanks

  • Encore WT8 touch screen won't work, prevents me from logging in

    I have just bought this tablet but it is a Dabs refurbished model, so not sure of its history. I went through the setup process and brought it on holiday. I discovered that once it was setup, every time it went into sleep mode or was powered off, the touch screen became unresponsive after it powered back up. I don't have an OTG cable, or a keyboard/mouse for that matter. In a small town where it won't be possible to buy one. May just have to wait until I get back and can use a cable and keyboard to log in. Not sure what the pattern is but from time to time, it has reacted to touch and allowed me to log in. When it did, I performed all windows updates, including drivers that were suggested. I have an old XP laptop which I am using now and once when I plugged it in via USB, it got the screen working for long enough to let me log in but that won't work now.  I tried to log in from my Lumia using RDP but it says it can't. May just be the version of 8.1 that's on the tablet.  I can get into the BIOS menu and the touch screen works in there. It is at V2.00 and the tablet is a PDW0AE-00900PEN Any other suggestions or should I give up and enjoy my holiday?

    The screen rotates as normal. I tried resetting the device but it doesn't work. In the device manager, it shows that the I2C HID device has a problem. It fails to start. This doesn't change after a reset. I dug a little deeper and the driver is hidi2c.sys. There doesn't seem to be a newer version of the driver. I did some reading and found people commenting that Toshiba aren't very good at fixing this sort of driver issue. it also may be that a windows update has caused a conflict which may be fixed by Microsoft. Either way, I can't see any way for me to fix this besides resetting my tablet to factory and preventing windows updates. I may do that once I am somewhere with more resources around me.

  • I need help with my ipod touch 4, i hit it on my table and now the touch screen doesn't work at all

    i got mad and hit my ipod agaisnt the table and now the touch part of the screen doesn't work i need help, i don't want to send it to Apple because i have music that i downloaded for free and i'm worried all my songs, pics, videos will go away if i send it to them.

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Maybe just a loose connection they can fix.
    Apple Retail Store - Genius Bar
    Here is how to get your media off the iPod.
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • My touch screen won't work when I wan to listen to music.

    When I try t scroll or touch any buttons while in the "Music" option, I can't do anything. The touch screen works for absolutely everything else, but the Music. Has anyone else had this problem?

    Scroll where? What buttons are you trying to activate? When you double click the Home button you can only use the bottom row, that is where the Music controls are located. You can't activate the top part of the screen

  • Micro USB problem. Touch screen won't work after c...

    Hi 
    Ihave tryed today to connect my Nokia Lumia 710 to my PC. I put my micro usb into my phone and everything was fine. Then i plugged the USB into my computer and the touch sceen wouldn't work probarly.

    Hi jojo100232,
    Thanks for posting and welcome to the forum.
    What you are describing may be caused by your PC not being earthed correctly. Have you tried to see what happens if your connect your Lumia 710 to a regular wall charger? I'd suggest checking the power connection for the PC and verifying the earth connection is correct. It may also be an earth loop if you for instance have your PC connected to your Stereo set. In this case you might try isolating the PC fro your other equipment by removing these connections and trying again. In these cases you might want to consider using a ground loop isolator.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Touch screen won't work - can it be fixed?

    My i touch was dead, so I recharged and restored it using the backup in itunes. It looks 'normal' now and turns on and off, but the screen is non-responsive to touch.  There's no Apple store nearby, so I just want to know if it can be fixed - at least enough for me to access my calendar. Thanks, Wendy

    You only possible fix is to try restoring to factory defualts/new iPod.

  • Touch screen won't work?

    Ok my problem is that my touchscreen doesn't work. I can scroll up and down with the buttons but I can't use they stylist. I need this palm for school and I havn't even had it a year and I am having way too many problems! Any suggestions?
    Post relates to: Palm TX

    Try these tests.
    First test:
    If you use a Screen Protector.
    Check that it is not stuck between the screen and the frame.
    If it is pushing down on the screen then this will cause your device to respond to that false 'Tap'
    Best is take the Screen Protector off to test properly.
    Also, you may have some 'dirt' trapped between the screen and the frame.
    Take a piece of stiff paper (business card works) and drag it between the screen and the frame and see if any dirt etc comes out.
    Do not use too much force, just drag.
    Soft Reset and go to Prefs and try to Calibrate the Touchscreen.
    If that does not fix the problem then.....
    Second test:
    Do a backup and after backing up all your info, do a Hard Reset and while still in this 'factory state' (no added apps) and no Screen Protector go to the Notepad application, tap on the screen then tap exactly on top of the original dot.
    Keep doing this so that there are many dots at different areas of the screen.
    Does the second tap register in same place or in a different place?
    If in a different place do a Soft Reset then try to Calibrate Touchscreen and test again.
    If still in a different place then you have a Hardware problem.
    If you are still under warranty then contact Palm support to get a replacement.
    If you are no longer under warranty I suggest you have a look at
    UsedPdaParts @
    http://www.usedpdaparts.com/
    Don't worry they use NEW parts, they have an excellent reputation and fair prices
    If you can Calibrate the TouchScreen immediately after a Hard Reset and have no problems with the TouchScreen (see Second Test) then it is probably a Software/Application conflict and you need to find the bad Application and remove it.
    All the best, woz of oz
    Post relates to: Palm TX

  • My touch screen won't work.

    Okay so I was messing around with my iPhone 3G and next thing I know is that it wouldn't let me unlock it for the lock screen. I can play music from the lock screen but that's it. Any suggestions on how to fix it?

    Apple will only replace a battery on your iPod.  Otherwise the will exchange your broken iPod for a refurbished one for a flat price of:
    Apple - Support - iPod - Repair pricing

  • Why does the 2520 Nokia Lumia have so many issues? I've had pairing issues, freezing issues, and now the touch screen doesn't work! I'm SO glad i spent $700 on a piece of CRAP! And Verizon will do nothing to help or make me happy. When my 2 years are up G

    #verizonsucks

    GregLallo,
    I would be upset if my phone was having multiple issues but would not want to lose you over this experience. Nokia Lumia are typically good phones and it saddens me to see you are having so many issues with the phone.  How often are you having the issues with the device not responding? What activities are occurring on the phone when it stops responding? Have you always had pairing issues? What are you pairing your phone to?
    AdamG_VZW
    Follow us on Twitter at @VZWSupport

  • Touch Id won't work suddenly, why ?

    hey guys,
    I've an iPhone 5s, and I upgrade it to 8.1 ,now my touch id won't work.
    when I tap on "Add a fingerprint" immediately shows below image.
    I try to restore, but the problem not fixed,
    is it hardware or software?
    and is there any app for diagnosing iDevices ?

    thnx for your reply buddy, but it doesn't work too

  • IPod touch 3G won't work after falling in water? Help!

    Ok it's been 3 months since my iPod touch fell in the...toilet. I immediately put it in rice after pushing all the buttons. It was only in the water for a second. When I picked it up the screen was dim, flickering, then when black. I wiped it off and put it in rice. I left it in rice for about four days. I finally plugged it up to the charger and after 20 minutes it came on. It told me I needed to plug it up to iTunes so I did. I restored it and when it was restored I tried to slide the bar at the bottom of the screen but it would never register. So I let it die and when I charged it again it wanted me to restore it AGAIN! I've restored it about five times!! Each time the touch screen won't work and it doesn't hold a charge very well. Also every time it does it wants me to restore it. What's wrong with it and how can I fix it? Oh and the home button doesn't work.

    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price             
    SarahAsh004 wrote:
    Could an apple person help? If so, how much would it cost?

Maybe you are looking for

  • How to make tasks in iCal repeat?

    This might be a stupid question, but I'm trying to make tasks in iCal repeat on a regular basis. For instance, instead of having to set a task to repeat every Monday at 10am, I just want to set a task for Monday at 10am and then have it repeat every

  • Airport no longer working after firmware update

    Before i get to my question, i think that it is necessary to give a bit of background as to why i have set my network up the way i have. I recently moved in with my girlfriend and brought my broadband package with me as i would have to pay a fee to c

  • Purchase order tutorial works local but not on server

    Hello, I have the trial version of LC Designer ES and have been going through the tutorials which work fine locally. I need a PDF form to be populated by an XML file (just like the Purchase Order Tutorial) but located on my web server - so that anyon

  • What is a Pantone process color?

    Hi, Hope you're doing well. I am just starting to learn about colors and printing. I have a job I am working on where the printer requires the Pantone colors. The person who originally created the file kept them as CMYK. I have been converting them t

  • Opening a jsp directly in source view and not design view

    I'm using JDeveloper 10.1.3.0.4, and everytime I double click in Application Navigator onto a .jsp file, it is opened directly into design view. Instead I'd like it to be opened directly into source view. Is it possible ? Thanks.