HT1222 MOTA External battery doesn't work with iOS 7

I have a MOTA external battery for my iPhone 5 which was working great until I update my phone to iOS 7. Now it starts charging for a few seconds, then stops and a message informs me that the battery case or the cable isn't certified. Is there a solution to this issue?

I do not know if the NOTA wires are considered certified but based on comments above they seem to fail even at the cost of 25$ for just the wire. That means wire and charger is 40$.
I think the mark up on Apple accessories is very high, how can deal extreme ship from china, without mailing fee, and charge less then 5$ for a charger and wire?
Why this sudden need for certified wires, I love my Apple products but I don't like the exaggerated accessory cost.

Similar Messages

TS1702 How do I hide purchased apps with iOS 6? With iOS 5 you can swipe the unwanted app to hide it, but this doesn't work with iOS 6.

How can I hide an app from the list of purchased apps using iOS6? With iOS 5 you can swipe the icon to display a red Hide icon, but this doesn't work with iOS 6. Suggestions (that work) will be appreciated.

Yes. On a computer. Not ios6.
On iTunes on your computer under purchased, select the x on the top corner. That will hide them.

ITeufel Radio v2 doesn't work with iOS 5.0.1

My iTeufel Radio v2 doesn't work with iOS 5.0.1.
It does not charge (just a short "beep" when connecting, but then it does not charge) and the audio function also doesn't work.
I already tried to reset the phone, but this didn't help.
Any ideas? Thank you.

I got Wi-Fi to reconnect by restarting my router and re-entering the wireless password. I wonder if the wireless account passwords were lost in the update process? I wonder if I would have just had the phone “forget” the wireless account and reconnect if that would have worked.
On an interesting side note, the exchange server connected after I got Wi-Fi back working! I am wondering if there is a issue with 3G and the new IOS 5.01? I could not get any exchange connectivity after the update on 3G.

My iphone 4s doesn't work with iOs 8. Battery drains very fast!!

After installing iOS 8 I'm starting to hate my smartphone. With iOS 7 the battery lasted until the evening while now barely reaches mid-afternoon with the same use of the phone and being careful not to leave apps in the background. I'm afraid to use the smartphone to save battery power ... frustrating!!
I ask Apple to release as soon as possible an upgrade to fix all the problems with iphone 4s or enable us to return to iOS 7.

Hi Massimo1973,
If you are having battery life issues with your iPhone, you may want to read over the tips in this article -
Apple - Batteries - Maximizing Performance
Thanks for using Apple Support Communities.
Best,
Brett L

Itunes Sync doesn't work with iOS 8.0.2

Hello,
after updating to iOS 8.0.2 on an iphone 5S the itunes syncing with an USB cable doesn't work anymore. A message is listed to "authorize" this computer, but it is already authorized. The iPhone isn't listed in the devices list with this itunes account either.
suggestions anyone?

Hi ..
Try this on one device to test.
Tap Settings > Safari then tap to clear History, Cookies, & Data then reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then try writing a post in ASC discusions.

Keyboard shortcuts doesn't work with iOS 6.1.3

Since I've upgraded my iPhone 5 to iOS 6.1.3, my keybord's shortcuts doesn't work.
Can you help me?Key

HI boombadabum,
I understand that you are having issues with keyboard shortcuts with a custom keyboard layout.
I also understand that when you press the shortcuts that the menu blinks like it is working, but nothing actually happens.
As a work around, you may be able to map them out with this add on[https://addons.mozilla.org/en-us/firefox/addon/customizable-shortcuts/]

Wifi doesn't work with IOS 7

Hi, I installed on my iphone IOS 7 but now wifi doesn't work. It doesn't find any wifi connections around me. Please help me! What can I do?

My wifi had no problem connecting to our home wifi prior to the IOS 7 update, but since updating this morning it's not working. My phone will try to connect to wifi, but then I get the "Unable to join the network" message. I tried resetting network settings, but that did not solve it. I tried @bam11's suggestion of being in airplane mode first, but still no luck. I've had my phone open to the Wi-Fi page, and saw it connect a couple times for the slightest second, but it disconnected just as fast. My son as the exact same phone (4s) and he's connecting just fine! Any other suggestions? I'm afraid to hard reset my phone.

QuickTime 7 iPhone preset doesn't work with iOS 7

Using the QuickTime Pro iPhone export preset doesn't seem to create movies that can be played in iOS 7. When clicked on, you get the "no" play symbol. The same movies can be played on an iPhone with iOS 6.
Any workarounds out there?

To Apple Discussions!
"You should fix the problem soon in the QT 7.1.3 version."
Apple Discussions are user to user message boards. Therefore, suggest that you report your concerns to QuickTime Feedback.
Good luck!

Larrouse English-German doesn't work with IOS 7?

After update to IOS 7.02 the Larrouse English-German do not work any more. It was working with early versions

I reset my Motorola S11 Flex to factory settings and it works just fine now. To do that, make sure the head phones are off. Press the power button and multi-function button and the lady in the head phones will talk to you..the first option is to reset to factory settings. Do this and it will work. Hoped this helped

VPN over a TC doesn't work with iOS 4 or iPad OS 3.2.2

MacBook, iPhone (1G, 3GS) and iPad are working fine with wifi and a Time Capsule. But there is a problem with newer OS (iOS 4, iPhone OS 3.2) and VPN (Cisco IPSec).
The VPN-connection is established (symbol in title-bar), but no systems within the firewall are reachable. IPhone 1G with iPhone OS 3.1.2 and VPN is working fine. The iPad also did, before upgrading to OS 3.2.
All systems do work fine with VPN via a Lancom access point. Seems that new OS won't work with an Apple Time Capsule any more. Update to 3.2.2 and 4.0.2 didn't help.
Are there any special security settings that have to be configured in a Time Capsule to connect via VPN/IPSec?
Thanks for any suggestions.

{quote:title=Tesserax wrote:}Time Capsules are VPN "pass through" devices{quote}
That's the way I expected they have to work. But it seems they do not. The VPN-data seems to be blocked by my Time Capsule. Is this behavior a bug?
As written above: All my devices are working fast with Wi-Fi over my Time Capsule and without any problems when used without VPN. VPN works fine with all my devices via a LANCOM L-305 access point. VPN with first generation iPhone and OS 3.1 is also working fine via Time Capsule. iPad also did before upgrading to 3.2.
With the newest software versions iPhone and iPad cannot exchange data through a VPN-tunnel when connected to my Time Capsule. Looks like some new security features have been introduced.
Is there any document available, where a complete list of all changes from 3.1 to 3.2 can be found?

Authentication through external trust doesn't work with rodc

We have an external sharepoint environment (B.com). For this environment we created a external trust. They trust our accounts (from A.com). On our side we have a site with an DC and a RODC (also DNS server). This site is in a DMZ. All required ports
for communication with DC's on the inside are open. The DC is used to set up the external to be removed after that. At the b.com side we've created an conditional forwarder for a.com (the rodc is used for the forwarder).
This setup is working fine. Users from both domains can access the sharepoint portal. But when we shut down the DC users from a.com aren't able to logon. We want to remove the DC cause we don't want it in the DMZ.
From online research I concluded this is because it doesn't know in what site it's in. The RODC only publishes site specific srv records. The option to change reg keys for the RODC to be able to register its srv records in the non zone specific part of dns.
This is not an option since the firewall prevents access to the rodc. This will cause all kinds of delays on our network with authentication (there's an option to make the RODC the least favorite option but this still won't prevent it from being consulted).
Is there an option to solve this through DNS on the b.com side by manually creating the srv records (which all point to the rodc)? Or are there other options perhaps (or am I on the wrong track with the not knowing in which site it is and thus not finding
the rodc)? Thanks!

anyone? Any tips would be helpful.

HP Pavilion G6 1006sh external display doesn't work with Windows 8.1

Hi All,
After performing a clean install of Windows 8.1 Professional on my Pavilion G6 1006sh I can not use my external Samsung monitor connected on HDMI port.
The windows install went smoothly without any issues the OS had builtin drives for all of the devices. So there is no unknown hardware in device manager there is sound, wifi, LAN, etc. As for video card I can see two different devices. There is a Generic Windows VGA and there is an AMD Radeon HD 7400M installed. The AMD Catalyst software was installed successfully. In windows graphic properties I can choose from two different video outputs, one is the General Windows VGA the other one is the Radeon. However windows detects monitor connected only on General VGA (which is the inbuilt notebook display) and nothing on Radeon so I can not use my external monitor.
Of course I tried to restart laptop / monitor many times, unplug / plug HDMI cable but no success. When I plug HDMI cable into laptop the monitor displays a message that it is connected but there is no incoming signal. The HDMI port both on monitor and laptop is working I used the same configuration with Windows 7 x64 Professional without any issues. It is only the operating system that changed.
I tried to remove the General VGA device in order to force using Radeon but after restarting there was nothing displayed on the screen, I couldn't see anything neither on inbuilt nor on external monitor so I had to restore a previously saved system configuration.
I tired to install the latest graphic driver to Radeon downloaded from AMD site but Windows crashed and restarted during the install process.
Please help me with this issue or make a statement that this version of Windows is not supported on this machine so I have to revert the previous system.
Configuration:
modell: HP Pavilion G6 1006 SH
RAM: 2x4 GB
OS: Windows 8.1 Professional x64 (HUN)
OS drivers: installed and updated automatically by windows
Antivirus: Symantec Endpoint Protection 12.1
Thanks,
Zoltan
This question was solved.
View Solution.

Hi there @nzole
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you installed Windows 8.1 onto your system, but now you cannot detect an external monitor with HDMI. I am happy to help you with this.
First, in answer to your question, this model is not supported for windows 8.1. It was only sold in versions that were configured for Windows 7. That would mean there are no drivers specifically customized by HP for this model for Windows 8.1. It is possible you could find an appropriate drive from a model that does support Windows 8.1 that may be close enough in terms of hardware, that its driver could work, but there is no guarantee.
Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC
HP Products - What If I Don't See My Operating System?
Do you still have the Recovery partitions, or did you make a set of recovery disks, prior to installing Windows 8.1?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Composite cable doesn't work with iOS 8 on ipad

I have the iPad3 and a composite cable Video/audio. I have been able to use these to watch videos from the ipad on my tv. Both sound and video worked, until I upgraded to IOS 8. Now it does not work.

What product are you using for that? I'll check to see if it's Apple approved. If it's not, then havimg it stop working is possible.

Apple support discussion doesn't work with iOS 8.0.2

Using Safari and trying to write a discussion on apple communuty support it is not possible to write the discussion. You can write but words you are writing are invisible. This is a bug both with my iphone 4s and iPad mini.

Hi ..
Try this on one device to test.
Tap Settings > Safari then tap to clear History, Cookies, & Data then reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then try writing a post in ASC discusions.

Facetime login doesn't work with ios 7

I updated to ios 7. I have a problem. Every time when I try to activate my facetime, I see this on the screen 'login failed. check the network connection and try again'. Is there someone who can help me please?

My wifi had no problem connecting to our home wifi prior to the IOS 7 update, but since updating this morning it's not working. My phone will try to connect to wifi, but then I get the "Unable to join the network" message. I tried resetting network settings, but that did not solve it. I tried @bam11's suggestion of being in airplane mode first, but still no luck. I've had my phone open to the Wi-Fi page, and saw it connect a couple times for the slightest second, but it disconnected just as fast. My son as the exact same phone (4s) and he's connecting just fine! Any other suggestions? I'm afraid to hard reset my phone.

HT1222 MOTA External battery doesn't work with iOS 7

Similar Messages

Maybe you are looking for