HT1222 There is error showing while updating my iPad 2 software to IOS 6.1. Please suggest me what should I do?

There is error showing while updating my iPad 2 software to IOS 6.1. Please suggest me what should I do?

You need to tell exactly what is happening. What does the error say?

Similar Messages

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. Hoy can I go back?

    Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. How can I go back?

    Sorry, you cannot downgrade iOS software.
    First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

  • I was trying to update my ipad software to IOS ver 8 but it was hung and I could not even power off

    I was trying to update my ipad software to IOS ver 8 but it was hung.
    iTune prompted me to enter password as it could not be connected but ipad is hung.
    Tried to power off to restart but could not

    Have you tried resetting your ipad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • Error: 12017 while updating e72 phone software

    There is an error occured when i try to install new update of my E72.
    Then i tried to update using Nokia PC OVI suite, there is also an error like this:
    " There was a problem. Please restart nokia OVI suite and try again. If the problem persists, uninstall nokia  OVI suite and downlaod the latest version of application from .......
    error code: 12017"
    Then i reinstalled the new version of ovi suite to check this problem but there is the same error.
    Please guide me how i can install new update.
    Thanks in advance

    What exactly error 12017 ? I was Updating my Nokia E 63 Suite and I Can't finished. Anyone can help me ?
    CAMuller wrote:
    I had same problem!
    After
    CAMuller wrote:
    I had same problem!
    Afterat services.msc I still had to restart Ovi Suite, it worked for me.
    How I disabling ICS ?
     Ovi Suite ERROR:12017  While Updating Latest
    .msc I still had to restart Ovi Suite, it worked for me.

  • I updated my iPad software to IOS 5, and now it doesn't see my WiFi. The IP addresses seem to be different on my "Sanders Family" network on my iPad than what shows up on my desktop

    Help. I just updated my iPhone and iPad software to IOS 5. Now my iPad isn't connecting to my WiFi. It "sees" it, and the network name even shows up under WiFi, but it's like it just keeps grinding and grinding. Sometimes it will let me click on the network and see the IP address. When I can see it, the address on my iPad is different from the one showing up on my desktop, but I can't figure out how to change it on my iPad. Any suggestions to get me hooked back into my wireless network?

    If the problem persists after you reboot as suggested by Ralph:
    Trouble connecting usually means interference, or another WiFi on the same channel.
    If you have any cordless phones, keyboards, or cameras, check what frequency they use.
    From a MAC or Windows machine you can see what channel each of the available networks are using.  Make sure your network is on a channel nobody else nearby is also using.

  • Error -1 while updating iPod 2nd Gen to iOS 2.2 to 4.2

    Hi All,
    I had 2nd gen ipod touch and it had some touch screen problem. I went to apple and paid 99$ for replacement as my ipod touch was out of warranty.
    Came home plugged in the touch, itunes asked me to update to iOS 4.2. Currently I am having iOS 2.2 on the touch.
    When I tried to update, itunes downloaded the file, extracted it and threw me an error "ipod could not be restored. An unknown error occurred (-1)"
    I have tried all the steps found on apple sites but nothing seems to be working for me
    I tried steps like, updating itunes to latest version, Mac OS updates, restarting...
    uninstalling the s/w which are used to jailbreak some of my prev ios devices etc.,
    please help me
    Regards
    -Hari

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. That seems to be your case. ake an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Been trying to update My iPad software to iOS 7.0.3,  download won't complete it's been 2 days, some apps also won't complete downloading

    Been trying to update my software to iOS 7.03 but it. Won't complete, it's make some apps stuck too, please help

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.
    If that doesn;t work, you can try updating through iTunes.

  • App error 200 while updating my device software

    Could anyone please give me some advice?
    I was updating my Blackberry device software and after the update had finished was prompted to restart my system and the phone but my phone has since refused to come on. it keeps showing 'App Error 200' reset
    The issue is that my blackberry is loading when the battery is removed and inserted again, but won't log in. After a while a white screen is displayed with the following message: App Error 200 and Reset just below it.
    When I select the reset option, the above mentioned process just repeats itself.
    My Blackberry desktop application does not even recognise up my phone once it is plugged in again.
    please i would appreciate any help to correct this error and regain the use of my phone

    i tried this one & it worked
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB10144&sliceId=2&cmd=displayKC&d...
    or
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB03901&sliceId=2&cm...

  • Error 2003 while updating my iPod 4g to iOs 5. Can't even restore

    Decided to update my iPod 4 gen to iOs 5 from 4.1
    During the updating iTunes (10.5 versions) gave me somekind of error. Somekind of: Updating failure-blah-blah-blah. So, I decided to restore my iPod. Opened iTunes, clicked restore (or smth like that, i have a russian iTunes, so i don't know how this button is in English), iTunes began to restore...but then an error 2003 appeared. I don't know what's that, there is no information in guides on apple. com, so I decided to ask u for help.
    p/s I did it all from Admin profile.
    Windows Xp x32.

    2003 is not listed there.  I also searched Apple support for 2003 and found nothing.
    selgomezrocks wrote:
    Check this page, it has all the error messages and their common problems: http://support.apple.com/kb/TS3694

  • HT4623 i am getting error 1604 while updating iphone 4

    I am getting error 1604 while updating my iphone 4 to ios 6.01. how to update the phone 

    look here also.
    http://support.apple.com/kb/TS3694

  • HT1222 Why are there error while updating my ipad

    Why are there error while updating my ipad from 5.1 to 7.1.1

    Because something is wrong...
    You can check here for troubleshooting information on specific error messages: http://support.apple.com/kb/ts3694

  • There was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

    there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • THere was an error updating your sofware. An error has ocurred while updating your devices software. Device communicat​ions error encountere​d. [A:0x00000​00F].

    I've tried the suggestion "Please try the following: Disconnect your device and restart your computer. Restart the loading process"  multiple times with or without battery, but still the same.
    This error propmpted while loading the system software.
    Anyone encounter this issue befire and how to fix it, really appreciated
    Thanks.

    I found it in loader.log
    [3] [8est:58:28:921] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Writing to Loader Action Log "52BE2234:3.10.0.47TM connection type: PC"
    [3] [8est:58:28:923] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got LAL_RESPONSE
    [3] [8est:58:28:927] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Retrieving persistent data struct
    [3] [8est:58:28:928] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got persistent data struct
    [3] [8est:58:28:928] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Retrieving Blocked OS CFP
    [3] [8est:58:28:929] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got Blocked OS CFP
    [3] [8est:58:28:929] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Getting the Device PIN
    [3] [8est:58:28:929] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got Device PIN
    [3] [8est:58:28:929] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Getting the Device BSN
    [3] [8est:58:28:930] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got Device BSN
    [3] [8est:58:28:931] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Corrupting opposite QNX partition 1, on archive load
    [3] [8est:58:28:980] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Programming Flash. Filesize: 1834156032 total bytes
    [3] [8est:58:39:751] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Command failed due to timeout
    [1] [8est:58:39:753] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:859] cfp operation failed (15): "Device communications error encountered. [A:0x0000000F]
    Please try the following:
    - Disconnect your device and restart your computer.
    - Restart the loading process."
    [1] [8est:58:39:753] [QnxProgrammerHelper] [0x00002f9c] [QnxProgrammerHelper.cpp:288] CFP::LoadQCFMFile failed. Error: F
    [1] [8est:58:39:754] [QnxProgrammerHelper] [0x00002f9c] [QnxProgrammerHelper.cpp:322] WriteModule OS failed.
    [20] [8est:58:39:757] [Loader] [0x00002f9c] [Loader.cpp:877] Switching connect state from 3 to 0 (timeout 15000 ms)
    [20] [8est:58:39:757] [USBEnumManager] [0x00002a20] [USBEnumSerializer.h:66] Lock requested, maximum wait = 180000 ms
    [20] [8est:58:39:757] [USBEnumManager] [0x00002a20] [USBEnumSerializer.h:70] Lock acquired
    [3] [8est:58:39:757] [CfpProgrammer] [0x00002a20] [CfpProgrammer.cpp:1143] Requesting BootImage Exit

  • Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

    Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
    I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
    This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
    What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
    Everything was supposed to be backed up and restored after the update!
    Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
    Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
    Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
    Apple, you have no idea the level of stress you have created today.....

    Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
    ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
    I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

Maybe you are looking for

  • Self Assigned IP + Firewall Disabled = No security?

    Hi everyone. My 8600M GT card died last week, so I had my logic board replaced and my Macbook Pro returned to me a few days ago. Before the logic board replacement, I had no issues connecting wirelessly to my Apple Airport Extreme (newest model with

  • XML Source in Warehouse Builder

    When trying to use the XML functions in OWB, we are immediately getting an error: class is missing 'oracle.wh.runtime.xml.PLSQLAdapter' How do I install this class, is it something that comes with OWB or with XML Toolkit or with..?

  • *HELP* Adobe Flash Player Has Stopped Working

    Problem signature:   Problem Event Name:    APPCRASH   Application Name:    install_flashplayer11x32_mssd_aih(1).exe   Application Version:    3.3.3.0   Application Timestamp:    5010882b   Fault Module Name:    setueout.dll   Fault Module Version:  

  • Illustrator is pixelated for retina display and currently updated to 16.0.4

    I updated Illustrator CS6 but the whole illustrator program is pixelated, including toolbars. This goes for Dreamweaver, InDesign and Flash. However Photoshop CS6 is fine. Any idea as to what I can do?

  • I can't backup Curve 8520 ipd file to my back-up hard drive

    I back up my PC's hard drive to a free standing Maxtor OneTouch 4 on a daily basis.  However, since installing the BB desktop software, the back-ups are failing with error stating that access to curve 8520.ipd file is denied.  Any thoughts? Alan