HT1222 What do I do if it says "there is an error while updating." Help please and thank you
What do I do if it says "there is an error while updating." Help please and thank you
Maybe this will help you; https://discussions.apple.com/docs/DOC-3551
Similar Messages
-
I have no idea what to do. It was going fine and then suddenly told me there was an error. What the heck do I do?
Place the device in DFU mode (google it) and restore.
-
Getting error -1202 when trying to connect to 'My Wish List" in ITurnes. Says there was an error in the ITunes store and to try again later. Have no other problems connecting or purchasing......
This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there. -
What is wrong when my computer says there is an error downloading photos from phone?
When I connect Iphone to computer to download images it says there is an error and it won't download them. What is wrong?
As long as that junk is installed you really can't begin to figure out what's wrong.
You wrote you tried to repair the startup volume using Disk Utility. Did you do that after starting your Mac with OS X Recovery, and did it report any errors? Random freezes associated with disk access such as playing iTunes music would be a symptom of disk failure. Make sure you have adequate backups. -
why can't I download from kuler, my computer doesn't recognise the .ase files its says its an unknown format, can anyone help please?
why can't I download from kuler, my computer doesn't recognise the .ase files its says its an unknown format, can anyone help please?
-
I am new to mac... and there is a solid black bar on my screen, that announces what page/icon I am on, then scrolls through every screen and announces what it is. Can anyone tell me how to remove this?? Please? Thank you
You may also find these Links of Interest...
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
Find Out How (Video)
http://www.apple.com/findouthow/mac/ -
i want to unlock my iphone 4s which is locked with orange france , and now i'm in Algeria and we dont have orange here so what can i do???? and also , my mic doesnt work with siri and dictaphone, it just work with the camera, help me plz and thank u.
You will have to contact orange to get your phone unlock. ONly the carrier that the phone is locked to can unlock the phone.
-
i have ipod touch. it couldnt be found on my computer so i uninstalled everything and re-installed everything and it still wont register with the computer. Ive been trying to restore it to the factory settings but it keeps saying theres and unknown error with my ipod. do i have to throw it out? HELP!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another USB port
- Try another cable
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Try on another computer -
My I Mac showed an error while updating the OS and now just hangs. What should I do?
I Mac asked me to update the OS from 10.7.3. It showed an error and now the computer just hangs. Its become excuriatingly slow. Takes about 15-20 minutes to boot up and takes hours to perform any function. I tried to update the OS again but it keeps showing an error in connecting to the server. What do I do.?
Have you tried booting into the Recovery HD to check/repair your disk. Restart holding Command+R - once booted select Disk Utility and then select Macintosh HD and click on 'repair disk' If it fixes anything click repair disk again until you get a clean pass. Whilst in Disk Utility you could also 'repair disk permissions' With Macintosh HD still selected click on 'repair disk permissions'. Once done, restart as normal from the Apple menu.
Then try updating again using the 'combo', available here: http://support.apple.com/kb/DL1582
If you still have problems you could try a Safe Boot: restart holding down the shift key until you see the grey progress bar. Once booted restart as normal from the Apple menu. -
Everything from my old computer is still in the music portion of my phone, I don't know how but it hasn't synced that part. I went through and edited the new library and there are fewer songs, it's telling my I don't have enough room on my phone. This is impossible when it is less music than I am currently holding. How do I get it to delete the old information and put on the new library?
How exactly was the music transferred to the new computer?
The correct way is to copy the ENTIRE iTunes folder from the old computer to the new computer. If it was transferred properly there are no issues with syncing to the iOS device. -
Hey , why always when i want to update my Ipad to ios 6.1.3 at the end tills me that the update was failed , its always ,please if you can help me, and thank you.
Try disabling your firewall and antivirus software and see if that helps - if you are trying to update using iTunes on your computer.
-
I REALLY NEED A DESCENT BROWSER FOR MY OLDER IMAC WITH LIMITED HARDRIVE SPACE. CAN ANYBODY HELP ME AS MY NETSCAPE BROWSER(1.7.13) IS STARTING TO MESS UP A BIT. THANX!!
Firefox 1.0.8 was the last version of Firefox for Mac OSX 10.1 versions. It is not supported by Mozilla since April 2006.
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/1.0.8/mac/en-US/
You should also look at Classilla. <br />
http://www.floodgap.com/software/classilla/ <br />
Looks like is still being maintained. <br />
http://code.google.com/p/classilla/wiki/Roadmap -
Whenever I import clips it always says there is an error and my clips are not imported.
I plug my flip into my computer and then select the clips I want to import to make my movie...it imports a clip and then a message flashes and says "There was an error importing your clips please look over imported clips." But there are no clips too look over..what should I do?
mkelly2012,
Try watching this video tutorial and see if it applies to your version of the Flip camera:
How To Get Flip Video Footage In iMovie 08
http://youtu.be/4-LMhFHk-IM -
I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?
What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time. -
My itunes radio is not working on my microsoft computer. I downloaded the new itunes but it says there is an error in my itunes store. What do i do to fix the problem?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.
Maybe you are looking for
-
Change width of fields displayed on PDF from ALV
Hello, I have a requirement in which i have to print an alv report in a pdf , now in the report say there are 11 fields of which 5 are hidden , so when i print the report in pdf , in the pdf output the entire width of the page is not occupied but onl
-
Can I downgrade my Ipod touch 4G?
I know there is a way, but the website to download the firmware and restore it in a different ios is shut down. The reson for this is that my computere for some reason will not download the latest itunes. It goes all the way through the download unti
-
hi All, can we implement Tag Cloud in our enterprise portal? The user searches for some keywords and those keywords are stored in some location and are displayed in one page and the most searched keywords are displayed in larger fonts. also please
-
hello everyone, does anyone know if there is any table for purchase order , where i cal get all purchase order and then i can sort them as per my requirement. Thnaks in adnavce, Honey
-
SapScript and Texts Formatting
Dear SDN, please, how can I format my texts, and get them working in my SapScript? I've created some texts, in SO10. In my Sapscript, I call them with "INCLUDE TEXT..." However, I have 2 problems (so far..) 1 - I'm not able to set different format (l