HT1222 why doesn't install ios new version?

Why doesn't install ios new version?

Hello Yan,
What version of the OS are you on now, & what vesion are you trying to upgrade to?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Similar Messages

HT4009 IX have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Why can't I install the newer version of Flash when I already have the older one?

My virus software is turned off. I have Flash currently on my computer. In the troubleshooting page I can see the clouds in the picture so I know my current flash is working. I went into the internet settings for add-ons and the flash is currently enabled. Why can't I install the newer version of Flash? I tried the run and save option and it still didn't work. I can see the installer in my downloads folder. But, all I get is a black blank box that does nothing. What else can I try to get the installer to actually install the updated version of flash?

Try the offline installer(s)
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X

HT6162 I need to install apple new version iOS 7.0

I need to install apple new version iOS 7.0

Follow these steps:
Settings -> General -> Software Update (it's on the right upper corner) -> Then download the iOS 7.1 :)

Safari is closed!!!!!!!! Why can't I install the new version???

Safari is closed!!!!!!!! Why can't I install the new version???

...or download the offline installer (http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg) and reboot. That whay there are no processes other than those launched at startup running.

Why iPod touch 4G Doesn't install ios 7

Why iPod touch 4G Doesn't install ios 7

Hey Ahmed Zaza, it's the RAM. iOS 7 requires 512MB of RAM. your iPod 4 only has 256MB of RAM. Currently only the iPod 5 has 512MB of RAM, and there is no way to increase the RAM. Sorry.

TS1717 i tried to install a new version of iTunes on my PC (Vista) and it wouldn't install. Today, I was looking for my iTunes, and somehow it was erased form my computer, along with about $130.00 worth of songs. Wha Happened? How can I get it all back

has anyone ever had their apple ipod disappear from the computer? Mine did when I tried to install a newer version on my pC (vista), yesterday. Now I can't even see any apple icons on the screen or any other reference to my ipod tunes. I have had them on the computer for more than 6-years, and have spent a sizeable sum with apple buying iTunes. Help!

One more note. All my music on my iPhone was erased when I clicked on "Transfer Music from iPhone". I mistook the "from" for "to". I want the music to go from the PC to the iPhone, not the other way around. I've sync'ed many times since the latest version of iTunes, so I know that doesn't work.

This is the best method to install a new version of Studio!

Do it cleanly. By this I mean create a new fresh startup disk for the install of Studio. Whether for Studio 1 ,2 or 3, trust me. this method will get you to a really stable FCS system.
1. Backup everything you want to keep if you're using the same drive you've been using as your startup disk. Clone it if you'd like to save time digging around for the files you want to keep. Or buy a new drive for your tower and use it as a startup disk, keeping the earlier one until you've transferred all you need from it. (I have no less than 3 startup disks for my single tower here) One is a 250 gig drive, the other two reside on their own partitions of a second physical drive. I use one system for beta testing, reinstalling the OS each beta test, and one "working" system for daily real work environments, and yet another "backup" system which is there just in case I need it. (but never really do actually).
2. Load your latest OS disk, and restart your computer from it holding down the c key during a boot up, or selecting it from the startup disk control panel in the apple system prefs.
3. Once your computer starts up from the OS disk, select "optional installs" from the button you'll see in the window. From there select "erase and install" and install will begin.
4. After the OS install, run Software update and go all the way with it. There's nada out there that's not OK to install.
5. Install Studio. If it's an upgrade version, no problem to not install the earlier version you're upgrading from. Just have it's serial number handy because FCS will ask for it as well as the upgrade serial number.
6. Run Software upgrade again to make sure all of your FCS apps are up to date. INSTALL EVERYTHING that Software Update proposes to install.
7. You'll be a very happy camper.. it will also feel like your whole computer is faster because of this clean install of the OS you did...
It's not impossible to get a fine upgrade done without doing it as I've described above, but with the latest round of problems being posted about a new install, I gotta say that this clean method will fix all the problems being posted here and elsewhere. Why even bother taking the risk? What I've posted above will be THE WAY to make sure you're system is running right.
I've espoused this method of install any time you upgrade your OS (i.e., Tiger to Leopard or the upcoming Leopard to Snow Leopard upgrades about ready to hit us all) OR any time you install a new version of FCS or even a FIRST install of the studio. It's not all that time consuming, and running pro level software really demands that the system install is totally clean.
I oversee about 75 FCS stations at the Colorado Film School, we do this clean install every semester (4 months) on the systems there, and really have incredibly stable setups. Never really having the problems that get reported all over the forums... not only that, they boot fast, run fast, and just work.
When software companies test new versions of their software in beta, it's always asked by all software manufacturers to install their beta over a clean fresh OS... always... so there's a lesson here to learn from them, and also a hint: nobody chooses the "upgrade" button for a new version of said software, rather they are testing over CLEAN installs only. Makes perfect sense then to install new versions of software as complicated as this is over a clean new OS install.
Jerry

I fully support Jerry's advice. Though it is a little like the old auto repair manual I once had. If you looked in the section under "clutch replacement", it started out like this ...
*Clutch Replacement procedure.*
• elevate car - be sure to use jack stands to support vehicle
• remove engine
• with clutch pressure plate exposed ....
Of course, they never spelled out all that was involved in the "remove engine" step. So, in the interest of adding more detail to Jerry's advice on the "erase and install" process for those who have not done it before and might be intimidated - read on.
• Make a list of all Applications to install. Which ones do you need? Go through your Applications and Utilities folder and note which ones you'll want to reinstall. Note the version.
(I don't know about you, but I had a shocking number of apps I downloaded, used for a few times and never used again. Forget installing these disused apps.)
• If you are upgrading from a PPC to an intel machine, you'll want to know if the apps are UB or PPC. Upgrading your PPC software to UB can be a significant cost in a PPC to intel conversion. Know what you are getting into - do a search before installation to see if there is a UB version available. You can find out whether an app is PPC or UB by looking in System Profiler>Software>Applications. This window will also tell you the current installed version number. Generate a .pdf file of it and have everything listed for your records.
• In the list, note whether is was a download or you have a disk. If it was a download, find the DMG or installer package and copy it to an external firewire drive. Put it in a folder titled - Apps to be installed - or something easily identifiable.
• If you need to go back to a previous version (e.g. QT 6.5.2) download the dmg file BEFORE you start the installation process.
• In the list, note if the application is a full install or an UPGRADE. If an upgrade, make sure you have the previous version's disks (as well as the serial numbers - see below).
If the UPGRADE version does not require the previous version to be present - eg when installing the upgrade version of FCP 7, DO NOT install earlier software. All you'll need is the previous serial number. The way to figure this out is to try to install the newest version. If it needs the previous version present before proceeding, the install process will tell you that.
Some upgrades will require that a version of the previous app is on the disk. If this is the case, when you install the first version, simply install the minimum so the app will be on the hard drive. You will need to do this because there will be NOTHING on the disk after you do your clean erase.
• Referencing your list, find ALL your disks before you start. This includes previous versions if you are unsure whether they will be needed.
• Spend some time looking through this forum for Professional Application installation issues. The classic example is a conflict between Logic and FCP. Install FCP first and you'll have no issues.
• Sort your list into an installation sequence. Lay out your disks in that order.
• Referencing the list, make sure you have ALL your serial numbers including those you've downloaded. I've purchased a number of programs on line and the only documentation of the serial number was an email. All those are kept in a dedicated folder in Mac Mail. For serial numbers that arrived via electronic means, use cut and paste instead of re-typing whenever possible. This will prevent errors in transcription.
In making the list, TEXT EDIT works ok, (I use Excel). Text edit has the benefit of being easily readable on any mac. Print the list out for reference, put a copy on a flash drive or a firewire drive where you can access it to cut and past serial numbers during the installation process.
• Recognize this is going to take some time. Ranting, drinking too much coffee, swearing, sitting in front of the computer watching the progress bar, etc will not make things go faster. All it will to is put you in a really bad frame of mind. Do it over a weekend when you can be multitasking. While you are cleaning off the mountains of paper on your desk or raking the yard, you can take regular breaks to check on progress.
Process -
• Download Carbon Copy Cloner or one of the other backup utilities and do a full backup of your existing system drive to an external firewire drive. Make the drive bootable. *Do not* cheap out on this as this is your insurance policy. If you forget something or can not find a serial number, you often can find it and copy it from the backup system to the newly installed version. Or, if things go horribly wrong, you can simply copy the old system back to your computer and pick up where you left off.
If you have a MacPro or G5 tower, an alternative to cloning your existing system disk is to pick up a new hard drive to use as the clean new system disk. Your existing system disk will be the clone.
• Once you have gathered and organized all the materials and backed up the drive or installed the new system drive ...
• Insert your OSX installation disk and boot the computer from the disk (Jerry explains how)
• Erase the hard drive. Use the ZEROs option as this will map out any bad sectors. This will take time. See the note above.
• Install the OS. If it is an upgrade install, see the note above regarding upgrade installs. Repair Permissions and then run the updates. Repair Permissions.
• Install your applications following your list. Make sure to Repair Permissions after each install and update..
Have fun, be prepared for a few minor glitches. If you multitask, you can get the garage/ or office cleaned out and your computer rebuilt. In all honesty, this process took all weekend plus time in the next week as I discovered apps that needed additional updates, configuration settings, etc. No doubt it would have been faster if I was sitting at the console the whole time, but I was able to get the office cleaned up and organized (which also makes ME much faster). Overall it was a very slick process.
When you have a fully functioning system again (you have tested all applications and everything works), CLONE the new system and put your info, your notes and the disks in a safe place - once you've done this once, why go through the pain of organizing this stuff again ...
Now, rejoice in a much faster machine with a lot more free disk space.
Cheers,
x

I installed a new version of iTunes and now...

I installed a new version of iTunes and now it doesn't recognize my phone. The phone software is up to date and working normally, but I would like to sync my phone and can't. Every time I plug my phone into the computer, which worked fine before the new iTunes software, my phone asks me "Do you trust this computer?" I have restarted my computer, and that didn't help. Also my computer will not recognize my phone, to download pics, after I've activated iTunes.
Thanks for the help!

found a solution for anyone else looking for it.
http://support.apple.com/kb/TS1538
everything is working now...*phew*

Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.

Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.

Firefox doesn't install new versions of plugins, but Flash may update itself automatically.<br />
You are still one version behind on Flash, current is Flash 10.1 r85<br />
If the Flash player didn't update properly then you need to download the full version and run the installer as Administrator (right-click: Run as ...)
Flash Global Notifications Settings Panel:<br />
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.html
You are more versions behind on Java updates with having Java 6 U11, current is 6 U22.
*Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

Cannot uninstall or install any newer versions of itunes

My laptop recently had to have the registry recovered. I'm sure this problem is related to the registry, but I don't know what key is preventing this from happening. Whenever I try to install any newer versions of itunes I get an error about the apple updater software cannot be uninstalled because the associated .msi can't be found. I even point to the .msi and it still fails. I have even tried to completely remove itunes and I get the same error. First of all, I don't understand why apple has designed the install files to remove previous versions when merely upgrading them would fix any problems like this. So, if anyone knows how to fix this, please help! I am now several versions behind and am getting errors adding music to my shopping cart because of it.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Anyone know why i cant upgrade to newer version of itunes , its coming with an error "ITUNES64.MSI FOLDER containing the installation package is missing ??

anyone know why i cant upgrade to newer version of itunes , its coming with an error "ITUNES64.MSI FOLDER containing the installation package is missing ??Ive tried unistalling previous version but same message comes up

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.

How do I retrieve contacts in windows.old folder after I installed a new version of windows?

how do I retrieve contacts in windows.old folder after I installed a new version of windows?

Skydiver119 wrote:
My situation may be different from yours since all mu music is ripped from cd's not bought from iTunes, but I would think the premise is the same.
Doesn't matter what is in your library.
When I moved computers I literally dragged and dropped the music where I wanted it to be. THen when I opened iTunes I imported the files back into iTUnes
This creates a new library with all the same items but you lose a lot of info: Ratings, comments, date added, custom EQ, playlists, etc.
If you simply copy the entire /Music/iTunes/ folder, it is the exact same library, not a new library. No info is lost.

HT201184 i canot install the new version of adobe flash player so i con not listen to the songs posted on fb

i canot install the new version of adobe flash player so i con not listen to the songs posted on fb

You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

HT1222 why doesn't install ios new version?

Similar Messages

Maybe you are looking for