HT1245 I am not presented with the same menu bar as these instructions. There is no 'info' tab. I have installed the latest iTunes version

I've selected my iPhone from the device list. I've started iTunes but I'm not seeing the Info tab as shown in this knowledge article. What program has the Info tab?

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

Similar Messages

  • My ipod gen 2 does not sync with the latest itunes

    I reset my ipod gen 2 to factory settings and version 4.2.1 will not sync with the latest iTunes.

    Are you using the USB docking cable that came with that shuffle (it has a mini-dock at the shuffle end)?  The docking cable for the current 4th (and 3rd) gen shuffle fits, but it will not work.  The connector is different.
    When you say, "does not sync with iTunes," do you mean it does appear in iTunes (in the sidebar under DEVICES) but does not sync, or that it does not appear in iTunes at all?

  • I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I want the Genius recommendation column back.  Is this possible with the latest iTunes?  If not, this was a poor decision to remove it :/

    I want the Genius recommendation column back.  Is this possible with the latest iTunes?  If not, this was a poor decision to remove it :/

    Hi,
    Genius recommendations are available in the itunes Store.
    Jim

  • I'm big fan of Google Toolbar but is does not work with the latest version of Firefox??

    I made an update yesterday and all of a sudden the Google Toolbar did not match with the latest version of Firefox...??
    Will that be solve or is my time with Firefox over???

    whatever you are trying for me to see, it blips up on my screen for a half a second and then it goes immediately to the reply page, can you type out or cut and past the entire link or tell me the title of what the post or article is? This is even worse, Firefox doesn't work within Firefox!! now that is sad

  • Deployment Rule Sets do not properly launch the latest available version from the JRE6 family when the jpi-version is specified by the RIA

    Issue Summary
    In Java 1.7 Update 71, Java 1.7 Update 72 and Java 1.8 Update 25 Deployment Rule Sets do not properly launch the latest available version from the JRE6 family when the jpi-version is specified by the RIA.  We've noticed this with Oracle Forms and Reports 11g where we have forms that specify Java 1.6 Update 20.  We used to be able to specify Java 1.6 Update 26 in our Ruleset, but now the only version a that works in our ruleset is Java 1.6 Update 20 which is the same version requested by the JPI-Version attribute of the jar.  The long term solution would be to upgrade Oracle Forms and Reports, however this isn't currently in the cards.
    RuleSet.xml Test
    Ruleset.xml
    1 
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    <ruleset version="1.0+">  
    <rule>
       <id location="*.javatester.org" />
       <action permission="run" version="1.6*" />
    </rule>
    <ruleset version="1.0+">
    <rule>
       <id location="*.internaldomain.name" />
       <action permission="run" version="1.6*" />
    </rule>
    </ruleset>
    Test 1 (Control)
    Installed Java Versions:
    – 1.7 Update 51 b13 (both x86 and x64 however x86 is invoked)
    – 1.6 Update 26 b03 (both x86 and x64 however x86 is invoked)
    Deployment Ruleset works as expected for both URLs
    Test 2
    Installed Java Versions:
    – 1.7 Update 72 (both x86 and x64 however x86 is invoked)
    – 1.6 Update 26 b03 (both x86 and x64 however x86 is invoked)
    The RuleSet works for JavaTester.org however on internaldomain.name we get the following error:
    With the trace logging turned on, I suspected the version attribute supplied by the RIA. I was able to trick Java by adding the following to my system deployment.properties file:
    deployment.javaws.jre.0.product=1.6.0_20
    deployment.javaws.jre.0.path=C\:\\Program Files (x86)\\Java\\jre6\\bin\\javaw.exe
    deployment.javaws.jre.0.enabled=true
    Because the RIA requests 1.6.0_20 it matches 1.6* from the deployment ruleset sooner than 1.6.0_26. However, if 1.6.0_20 is not available 1.6.0_26 should match according to the Deployment Rule Set documentation:
    http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/security/deployment_rules.html
    The version of the JRE that is used is determined by the following order of precedence:
    1. The current version of the JRE is used if it is available and matches both the version attribute and the version requested by the RIA.
    2. The latest available version of the JRE is used if it matches both the version attribute and the version requested by the RIA.
    3. The current version of the JRE is used if it is available and matches the version attribute.
    4. The latest available version of the JRE is used if it matches the version attribute.
    If no version is available that meets the criteria, then the RIA is blocked, and a message is shown to the user. To provide a custom message, include the message element.
    As a result:
    If Java 1.6.0_20 is listed in the version requested by the RIA and 1.6.0_20 is listed in the deployment.properties file, #1 matches.
    If Java 1.6.0_20 is listed in the version requested by the RIA, but 1.6.0_20 is NOT listed in the deployment.properties file the #1 SHOULD match, but doesn’t. It used to match up-to and including JRE 1.7 Update 51 however the ruleset appears to no longer match in subsequent versions.
    #2 should never match with our current Deployment Ruleset. It would match if we specified 1.7* as a version in the Ruleset.xml.
    #3 used to be broken as well after JRE 1.7 Update 51 however this bug has been marked as fixed. See: http://bugs.java.com/view_bug.do?bug_id=8032781
    I have reproduced this issue with Java 1.7 Update 71, Java 1.7 Update 72, and Java 1.8 Update 25 when one of these versions are installed with Java 1.6 Update 26.

    I can't seem to edit this post anymore, for some odd reason.
    So here goes;
    I found this post in NVIDIA's knowledge base;
    When installing an after-market graphics card into a certified Windows 8 PC with UEFI enabled, the s...
    The interesting parts in this post are as follows;
    When an after-market graphics card is installed into a motherboard with UEFI enabled in the system BIOS, or if the system is a certified Windows 8 PC with Secure Boot enabled, the system may not boot.
    UEFI is a new system BIOS feature that is provided on most new motherboards. A UEFI system BIOS is required in order for the Windows 8 Secure Boot feature to work. Secure boot is enabled by default on certified Windows 8 PCs.
    In order to get the PC to boot with a graphics card that does not contain UEFI firmware, the end-user must first disable the secure boot feature in the system's SBIOS before installing the graphics card.
    Note: Some system SBIOS's incorporate a feature called compatibility boot. These systems will detect a non-UEFI-enabled firmware VBIOS and allow the user to disable secure boot and then proceed with a compatibility boot. If the system contains a system SBIOS the supports compatibility boot, the user will need to disable secure boot when asked during boot process
    This leads me to believe that the BIOS update that wrecked my setup was 9SKT58A/9SJT58A, which only contains one change;
    "Adds support for updating BIOS from a WIN7 BIOS to a WIN8 BIOS".
    I've just ordered a cheap UEFI-compatible GT640 from Gainward, so I hope I'll be able to try that out this weekend.

  • Will my iPod 3G be compatible with the latest iTunes (11)?

    Hello all.
    As the title asks.....Will my iPod 3G be compatible with the latest iTunes (11)?
    The reason is I am having problems making my iPod 3G, iTouch 2G and iPhone 3GS all connect to iTunes store etc. I am having an error message of -42408 when launching my present iTunes 10.6.3.

    We have 2 out of 3 of those and iTunes 11 works great on all of them.
    It does take some getting use to from iTunes 10.

  • I have a new 7th gen iPod, I have up loaded the latest iTunes version, I go to the music tab to sync, I click sync and the ipod starts to sync, but it does not sync all the music. It indicates all the songs on the screen, but not on the ipod

    I have a new 7th gen iPod, I have up loaded the latest iTunes version, I go to the music tab to sync, I click sync and the ipod starts to sync, but it does not sync all the music. It indicates all the songs on the screen, but not on the ipod

    I do not have the screen shown with the
    Pull down the “Store” menu and choose “Deauthorize This Computer”
    3. Now go back to the Store menu and choose “Authorize This Computer”
    options.

  • HT201263 iphone is stuck in recovery mode and wont restore with the latest itunes

    My iphone 3 is stuck in recovery mode. It wont restore with the latest itunes what can i do aside from thowing it. please help.

    I have the same problem today. I accidentally let it slip off my lap right in the middle of the restore.   I didn't capture the error code when failed but now I just have a black screen with the itunes logo.  It isn't displayed in Windows explorer or itunes, however I do hear my computer acknowledge something has been plugged in when I disconnect the cable and reconnect.  What should I do?

  • HT1923 I downloaded the latest iTunes version and now get the following error message: "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes." Can anyone provide suggestions on what I should do next?

    I downloaded the latest iTunes version and now get the following error message: "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes." Can anyone provide suggestions on what I should do next?

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • Iphone 4 sync issue -  My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

      My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

    Remove the song in question from the sync list and see if the rectifies the problem.
    If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

  • Hi there, got 3 issues at once.... 1) can't download the latest itune version (it simply stops, not even an error message) 2) can't access the itune store and in order to fix this i need the latest version 3) one of my ipods isn't recognised by itune

    Hi there, got 3 issues at once....
    1) can't download the latest itune version onto my PC (it simply stops, not even an error message)
    2) can't access the itune store and in order to fix this i need the latest version - catch 22!
    3) one of my ipods isn't recognised by itune, nit sure if because of the earlier problems?
    .... thanks
    S.

    Hello SAB7700,
    This first article can help get iTunes successfully downloaded and updated, which should restore access to the iTunes Store.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Once iTunes is successfully updated, the following articles provides steps that can help get your iPod working in iTunes again and the iTunes Store functioning, should the update not resolve these issues
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • HT1491 with the latest Itunes, how do you buy songs appearing in my wish list ? you use to be able to hit the button that said buy, but it's no longer found. thanks

    with the latest Itunes, how do you buy songs appearing in my wish list ? you use to be able to hit the button that said "buy" or "buy all", but it's no longer found. thanks

    http://support.apple.com/kb/PH12295
    or
    http://support.apple.com/kb/PH12503

  • I can only listen to music in iTunes when i'm connected to the internet. Everything seems to have uploaded onto iCloud - something I didn't sign up for. Happened with the latest iTunes update. Help!

    I can only listen to music in iTunes when i'm connected to the internet. Everything seems to have uploaded onto iCloud - something I didn't sign up for. Happened with the latest iTunes update.
    All of the music is still on my computer, but when I play it through iTunes, it either buffers first (when I'm connected to the internet) or it is greyed out (offline) and I can't listen to it.
    This is beyond annoying. Is there anything I can do to sort this out?
    Cheers.

    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
    Check out the following KB Articles:  http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
    http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer

Maybe you are looking for

  • PDF to Word Document problem

    First time user on Acrobat 9 Pro and am trying to convert a PDF document (I'm not the author) to a Word document. Once a word document I want to be able to edit or e-mail to a 3rd party to edit. Each time I have attempted "save as" or export the foll

  • The Apex 3.2 Installation Documentation - How to Install under 10g?

    I finally have a project that looks like a great candidate for Apex. My target database is 10g (as most of our customers are running that version). My problem? [The Apex 3.2 installation guide|http://download.oracle.com/docs/cd/E14373_01/install.32/e

  • Multi page tiling grayed out?

    So I'm trying to save a lot of work recombining individual pages by doing a project as 1 sheet in illustrator (CS3) and then printing it to a PDF.  But, I cannot click the Create Multi-page PDF from Page Tiles option in the General section like the i

  • Hyperlink not working

    I  have a button symbol on the top layer in a flash file.  I have it fade in and on the last frame of the tween, I placed an action of: on (release) { getURL("http://www.url.com", "_blank"); I copied that frame and pasted it on the last frame of the

  • Iphoto hogs my cpu, even when running in the background

    Hi, I can't leave iPhoto running in the background because it regularly uses 47% to 98% of my cpu (although there are times that it only uses 12%).  Eventually the computer heats up to over 200 degrees (F) and freezes, forcing a hard re-start.  I did