HT1273 mobileme on 1st generation apple tv

How do i set up Mobileme on 1st generation apple tv......now is icloud but will not let me in

didn't apple close down mobileme ?

Similar Messages

  • HT1551 I ordered a rental movie on my computer and want to watch it on my 1st generation apple TV and it is not showing up there...any suggestions?

    I ordered a rental movie on my computer and want to watch it on my 1st generation apple TV and it is not showing up there...any suggestions?

    I had same problem last night with a movie rental not showing up under the 'Rented' tab in iTunes/Movies on my iMac: as I had no other rentals, there was no 'Rented' tab at all.
    In iTunes 11, the Downloads icon only appears next to the Search bar while there is an active download. Once any  downloads are finished, the icon disappears.  I had no icon so I had to assume the downloading had finished (in the previous UI you could check download progress even after they had finished).
    My movie rental did, however, show up under 'Rented Movies' under the 'Movies' tab in iTunes/Devices/(select any i/device) so I knew it was somewhere in my iTunes.  Yet, we couldn't access it via Apple TV.
    I fiddle around for a bit, restarting iTunes, restarting the iMac, to no avail.  Then I did a little housekeeping and moved a different movie I'd imported awhile ago, from the 'Home Videos' tab under iTunes/Movies.  Under File/Get Info, the 'Media Kind' was incorrectly set to 'Home Video' so I changed it to 'Movie'.  Thus the file was moved over into the Movies tab.  Hey Presto!  The Rented tab suddenly showed up, and there was my rented movie!
    This is the second time a movie rental did not show up after downloading.  Unfortunately my husband initiated the download so we figured he must've messed up somehow as he's not as familiar with iTunes as me.  Hence we opted to download the movie under a different iTunes account, which worked the second time with no problem.  Needless to say the invoice for the original download had no problem in finding us, hence we were effectively being charged twice for the same movie!  We have to contact apple support (such a hassle) but hopefully they will understand the issue (that's the difficult bit) and they are usually good at refunding when they finally accept the customer is genuine in their claim.
    In case anyone is tempted to critique my method, we download rentals through iTune on our computer as we had too many problems trying to rent via Apple TV.  Often the movie was not available to watch for many hours after it was rented, even though we'd start 'download' halfway through the day and sit down at night to watch it!  We have also had problems with movies that kept stopping during viewing because it wasn't streaming fast enough.  We'd give some time and come back to viewing, only to encounter the same.  One time we gave gave up and tried again the next evening, only to find the movie expired.  There is meant to be 48 hours after you've started viewing to resume watching a movie.  Apple's only response to this was to advise we needed a broadband internet connection to stream the movie - this was despite me already telling them we have broadband.
    Anyway, I hope this helps anyone experiencing similar issues with movie downloads.

  • Have a 1st generation Apple TV, which is not showing as a device in iTunes. Had no problems with Apple TV until I changed from a Windows PC to an iMac. I have changed my IP address, sub mask address and router address in the Apple TV, Can anyone help?

    I have a 1st generation apple TV, which was working perfectly until I changed from a Windows PC to a Imac. The Apple TV will not show in Itunes. I have changed the IP address, sub mask  and Router IP address. Since changing I have switched everything of and on again. Can anyone help?

    I have a new router and computer. I have just remembered that just before my old PC died on me, I transferred my iTunes library to a hard drive. I can't remember exactly just how I got my library back, but there are definately things in my library now that were in my library on my old PC! Hope this makes sense. What do you mean by same location? Do you mean in the same place in the house?
    Another difference I have just thought of was my old router was connected directly to the computer bu I have not been able to do this with Sky as my PC is not near a phone socket! Will this make a difference?

  • Hello.  My 1st Generation Apple TV with HDMI cable does not turn on.  Its a used model purchased on eBay.  I've checked and ensured that the electrical plug works.  Is there anyway to manually check to see if the unit turns on or do I have a defective uni

    Hope I'm using this forum right.  I purchased a 1st Generation Apple TV on eBay.  Unfortunately, I cannot get it to turn on.  I have another Apple TV (1st Generation) that works flawlessly on another TV.  So I tried to use the new unit on this TV with same electrical cord and HDMI cable.  No luck.  It would not turn on.  So I do not know if I have a defective unit or if there's another method of turning on the Apple TV.  Again:
    1.  I double checked and it was on the correct HDMI setting (the other Apple TV worked on it) and used the same cable
    2.  I double checked that the electrical was correct - again, the other Apple TV worked correct.
    Any suggestions on fixing this would be most appreciated. 
    Thank you

    Welcome to the Apple Community.
    A good indication would be the status light to begin with, it should flash rapidly on start up and then settle down (assuming the status light is working-they have a habit of fading)
    The other thing you could try is cycling the resolutions in case the previous user has left it on a setting that your TV doesn't support.
    Press and hold both the 'menu' and '+' on the Apple Remote for about 6 seconds.
    Press '+'or '-' on the Apple Remote to cycle through the display resolutions.
    Pause a couple of seconds after each press for the Apple TV to accept your selection.
    When Apple TV reaches an acceptable display resolution and “If you can see the Apple logo, select OK” appears on your TV screen, press 'select' .
    If that doesn't help, I fear the Apple TV is defective.

  • I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

    I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

    Welcome to the Apple Community.
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • 1st Generation Apple TV

    How can I get my 1st generation Apple TV to connect to my new MacBook Pro?

    Welcome to the Apple Community..
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • TS3354 I downloaded a HD and SD version of the movie and can't play it on my 1st generation Apple TV

    I bought a HD version of a movie and it won't play on my 720 p TV or WIndows PC, then I went back and re-downloaded the SD version of the movie. Now the SD version will play on my Windows computer, but it still won't play on my 1st generation Apple TV.

    AppleTV1 can sync with 1 iTunes library - the top one listed in Settings>Computers.
    Other libraries are 'shared' or streaming only, and appear under the top entry.
    You basically need to remove the current iTunes library from AppleTV - select it and remove it - then adfd it again as the to 'sync' compuetr entry.
    NOTE - changing the sync liubrary wipes AppleTV of data though apparently it does not delete items not yet reverse synced to iTunes.  If it buggers up contact iTunes store support.
    AC

  • I need to transition my 1st Generation Apple TV from an older instance of iTunes to a new instance of iTunes on my brand new Mac... How do I "switch" from one instance of iTunes to another? How do I get the 5 Digit Code Network to come back on my Screen?

    I need to transition my 1st Generation Apple TV from an older instance of iTunes on my iBook to a new instance of iTunes on my new Mac... How do I get the 5 digit Network code to come back? Is there anyway for 1st Generation Apple TV to be synched to two instances of iTunes or do I have to choose one or the other? I appreciate any advice or suggestions. Thanks!

    The 5 digit code is every time different. That does not matter. Just integrate every device into your network.
    You can connect many computers to Apple TV but syncronisation works exactly with one computer. That's why I use "streaming". But you can sync one computer, then another, and so on. The content on your Apple TV is the content from your computer that has synced last. But you can not mix it.
    The new Apple TV has no syncronisation. Everything is streamed,
    Regards,
    Torsten,
    Germany

  • Does 1st generation apple tv work with windows 8?

    Having trouble getting windows 8 to reconize 1st generation Apple TV.  Says nothing about windows 8 in online manuals.  Talks about iTunes as being 32 bit system - windows 8 is 64 bit system.  Is there a problem?

    As long as iTunes is installed on the computer and it is on the same network as the Apple TV, they should simply see one another.
    Do you actually have iTunes installed on the computer?

  • Stuck on version 2.4 software - 1st Generation Apple TV

    I have just completed a factory reset and am now stuck on version 2.4 software. Is there something else that I need to do to upgrade to the latest version available for a 1st generation Apple TV?

    tried
    http://support.apple.com/kb/HT1600

  • Airplay on 1st generation apple tv

    How do you use airplay on 1st generation apple tv

    AppleTV1 doesn't support Airplay which is a new feature of AppleTV2.
    AppleTV1 has Airport function which means you can send audio to it like an Airport Express.
    Apple are highly unlikely to upgrade ths AppleTV1 software to allow Airplay.

  • Does anyone know how to fix a 1st generation apple tv that plays moves by frames?

    My 1st generation apple tv is playing moves in frames. Does any one know how to fix this?
    I have done a factory reset but did not work?
    I have checked that I have the latest softwear 3.0.2. Is this the problem?

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode use this program
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I bought a movie on my 1st generation apple tv and it isn't automatically transferring to my computer so I can watch anywhere. Anyone have this problem? Is there a solution?

    I bought a movie on my 1st generation apple tv and it isn't automatically transferring to my computer so I can watch anywhere. Anyone have this problem? Is there a solution?

    AppleTV1 can sync with 1 iTunes library - the top one listed in Settings>Computers.
    Other libraries are 'shared' or streaming only, and appear under the top entry.
    You basically need to remove the current iTunes library from AppleTV - select it and remove it - then adfd it again as the to 'sync' compuetr entry.
    NOTE - changing the sync liubrary wipes AppleTV of data though apparently it does not delete items not yet reverse synced to iTunes.  If it buggers up contact iTunes store support.
    AC

  • Why is Apple trying to phase out the 1st generation Apple TV, but they still sell shows, and movies?

    Why would Apple continue to sell movies to people who won the 1st generation Apple TV,  while they are obviously trying to phase it out?  That is totally unfair to the original customers!  The upgraded remote only works with audio content, and not video!  If they are phasing it out, than they should no longer sell products to download to it!  Or when they upgrade their remote app, have it work with the item that you're still making money off of! Now, I have to turn on my computer in order to listen to music with the new upgrade, whereas I never had to do that before!

    Hello:
    You are only talking to users here (not Apple).  I suggest your direct your question to Apple HQ in Cupertino.
    Barry

  • Does homesharing prevent 1st generation apple tv from appearing on itunes?

    does homesharing prevent 1st generation apple tv from appearing on itunes?

    Welcome to the Apple Community.
    prozak57 wrote:
    does homesharing prevent 1st generation apple tv from appearing on itunes?
    No.

Maybe you are looking for

  • 10.1.3 - Remote Debugger not connecting to remote OC4J

    I have been using a previous version of JDeveloper and connecting to a remote OC4J instance without any problems. However, 10.1.3 does not seem to be able to connect. I select the Remote Debugging/Profiling option from Project Properties-Run/Debug Th

  • Task Due date in SharePoint 2013

    Hi All, we have an issue where we want some customization or possible turn around solution on SharePoint 2013. i want to know that if we are allocating any Task to any user then we have Start Date & Due Date in Task Form. Here what i want that automa

  • DBMS_PIPE Package Help

    Hi, Below block is executed successfully but when i use it to dynamically fetch the values in SQL* Plus no values are getting printed. Please help me out in rectifying the issue. SET serveroutput on size 1000000 SET wrap on SET linesize 80 DECLARE v_

  • I have deleted my Mac Air's IP address in Wifi system

    Guys! I m really sorry that I think I changed my IP address....You know.....When I try to join with my son's Mac Book Pro by airport......,he just changed the IP address of mine and put his IP address in my Mac Air.....Now cannot connect to INTERNET.

  • Concurrency in Java Thread.

    Hello Friends, I need to create two threads and these threads should be run parallelly. I explain in detail. I have function1(). From that i will call func2(). Inside func2() i will start a Thread also call func3(). Now i need to perform these proces