HT1277 After i upgrate my mac pro OS X 10.9.2 (13C64) some application not responding

I Don't know after i upgrate my mac aplecation such quick time player app store and update are not working

Hello Ketut,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If no change on restart...
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Similar Messages

Bought the Iphone 6 2days ago. My mac pro finds the phone on bluetooth but phone will not discover ANY bluetooth divices. Have hard reset the phone and restarted as well. nothing. Any suggestions or issues. This is the first apple phone I have owne

Bought the Iphone 6 2 days ago. My mac pro finds the phone on bluetooth but phone will not discover ANY bluetooth divices. Have hard reset the phone and restarted as well. nothing. Any suggestions or issues. This is the first apple phone I have owned. Am not very happy that Bluetooth would present a problem.

I can't help with the other devices but note that an iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

Application Not Responding - Mac OS X Lion & CS5

I keep having issues with my DW CS5 (11.0 Build 4993) & Mac OX Lion. I bought a new MacBook Air and installed DW CS5 on it, I did all the updates too for DW, but I'm having issues with it freezing and then crashing and not relaunching. I do some simple change on a website and the application freezes and says Application Not Responding. After force quiting I try and relauch and I get the green welcome screen like it's launching but then nothing comes up and it says Application Not Responding (ANP). I've tried restarting and sometimes that will make it so it actually launches completely but then after a while it starts up again with the ANP. I considered that maybe the MBA wasn't quick enough, but I think it's plenty powerful for doing DW. When I got back to my iMac at home I started to have the same issues after upgrading it to Lion. There seems to be an issue with CS5 and Lion. Any ideas?
Thanks,
Cody

CS5 was a fresh install on the MBA, on my iMac it was a fresh install as well (but back when I got the iMac a few months ago and was still using SL). I do have extensions on my iMac, but not on my MBA so I don't think that could be the cause (although I may try it and see). I usually would have Firefox, Safari running as well. Sometimes Photoshop and iTunes would be running too. If an error message does pop up it's usually the Mac's "Application Quite Unexpectantly" is that the type of message I should try and provide to Adobe?
I don't believe a specific action invokes the freeze/crash I've had it happen when I try and open an HTML page, when I try and save an HTML or when I try and select text to make a text change. I'll try and note exactly what I was doing the next time it happens, it seems to be speratic but very annoying cause it can take a few times of force quitting and relaunching to get DW to open back up.
Thanks,
Cody

Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

Hi my Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

Please include your Mac model and OSX in your profile, as it will help the community to help you. Thanks and welcome to Apple Communities.

I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding"

I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.

The application Safari can't be opened -1712
What to do about "The application 'Safari' can't be opened" -1712 ?

My keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random.

my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.

No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair.

Mac osx 10.6.8 itunes launches automatically and will not respond to quit or force quit

mac osx 10.6.8 itunes launches automatically and will not respond to quit or force quit in the Activities Monitor. When I quit or go into the Activities monitor and try to quit, it goes off, briefly, then immediately relaunches. If i turn the computer off, and then on, iTunes launches automatically. ITunes 10.4. The only thing I remember doing different, lately, is I just updated a couple of days ago. Has anyone else had this issue? Thanks!

Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Mac is running SUPER Slow, applications not responding when i open them, Beachballs everywhere

Whenever i open an application (Take Google chrome for an example) it bounces like 20+ times, then on activity monitor it says "Application Not Responding". Whenever i type too fast on spotlight or finder, my whole desktop freezes, im suspecting this can be maybe HDD failure, i have repaired my MacintoshHD probably 3 times this past week. I have 150GB free out of a 250GB hdd, and i have 4 GB RAM. PLEASE HELP! Im currently enrolled in college and this is vital and needs to be fixed ASAP.

Hi Rbmx1_,
Thanks for using Apple Support Communities. See this article for some steps to try if your Mac is running slowly:
Mac OS X 10.6: If your Mac computer runs slowly
http://support.apple.com/kb/PH6844
Cheers,
- Ari

How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

You could try booting into Safe Mode to see if that will help. And "Repair Permissions" in Disk Utility.
Have you got Keychain set to open on Login or is it attempting to open on it's own.

Mac Pro 2006 won't boot after attempted cpu swap, Mac Pro 2006 won't boot after attempted cpu swap

I just picked up a used Mac Pro 1,1 (2006). It has 2x2.0 GHz dual-core processors and 5GB of RAM with the 7300GT card.
In this configuration, the machine was running perfectly. I, of course, wanted to upgrade....
I ordered a pair of 5160 3.0GHz processors cheaply and followed a video tutorial to install them. I used Arctic Cleaner and Arctic Silver 5 for the thermal paste.
Bottom line is: I installed the two new processors and when I fired it up, I could hear the fans, optical drive and hard drives all spinning (normal fan speed - NOT "jet mode", and the HD sounds like it's spinning - NOT like it's booting). NO boot chime and NO display. I popped the cover off and saw the CPU B FAIL light on. I swapped CPUs to test the processor, expecting to see the CPU A FAIL light come on. It did not. It just powered the fans/drives with no result (again, with no boot chime and no display).
To make a long and frustrating story short, I wound up putting one of the original 2.0GHz processors in slot A, leaving B empty (maybe I damaged the socket?) and IT STILL WILL NOT BOOT. I have tried all of my processors - the original 2.0GHz and the new 3.0GHz ones - with the same result. There are NO symtoms or indications - no error LEDs, no beeps - no indication why this machine will not boot.
I have reset the SMC, pulled (and replaced) the coin battery, and left it unplugged for over an hour. I have re-seated everything I can think of.
As of rigt now, I can hear the fans quietly humming with the optical drive making a quiet "click" sound as it seeks for a disk to read, and I can hear the faint chatter of the HD head. The power LED is nice and bright (no flashes or pulses), and there are no red LEDs on inside the case. The memory LEDs flash once during bootup and that's it (it's the RAM the machine came with). Pressing the DIAG LED button tells me the machine has power (green LED), has trickle (yellow LED) and the GPU light flashes green.
Of note, during the swap, I got a tiny bit of thermal paste (non conductive) on the contacts of my 2.0 CPUs - which I cleaned off with alcohol and let dry. The gold contacts all appear to be good on the original processors. I can't really see the tiny little pins in the CPU sockets (my eyes are not as young as they used to be!), but the "look" like they're all there.
I'm going to leave this unplugged overnight, but does anyone have any ideas?? If I managed to somehow destroy ALL of the CPUs, wouldn't I get a warning LED or beep or something? Ideas are welcome, as I cannot afford to replace this machine - it has to get me the rest of the way through college.
thanks
Richard

Hello Grant
>
Hardware sets the fans to maximum, and only properly-operating software resets them to "normal levels. If you have fans at normal levels, some software is running.
>
That's what I was thinking, but I'm not even getting the startup chime, and the HD sounds like it's powered on but not doing anything.
EDITED TO ASK: what software could be running at this point? Nothing has loaded from the HD, that much I know...
>Do you still have CPU A or CPU B failure lights?
No. I have just one original processor installed in the CPU A socket. No lights of any kind. (Even if I install an original processor in CPU B, I still occasionall will get a CPU B FAIL light, so I'm thinking I damaged the socket somehow...the light will not be consistent, but it's always the CPU B FAIL light - the light only turns on some of the time (and stays on once lit) - so that's why I pulled the B processor and am simply trying to boot with A alone)
>Do you have a flashing power on light, indicating failed or no memory?
Again, no. I can "make" the light flash by removing the memory riser, but when I re-install the riser, the light stops blinking (with power off during removal/install, of course!)
>Have you done the more severe SMC reset with the reset button OR:
unplug AC power.
Yes. I have used the SMC reset button 3 or 4 times. I unplugged the machine and left it (with coin battery installed) for an hour. The last thing I did last night was that I left it unplugged overnight (with coin battery removed). I have yet to attempt a power on this morning. I will do so and report back.
>
unplug AC power.
Press and hold power-on for a quarter minute to drain the power capacitors.
Re-plug AC power.
wait a quarter minute.
then power on.
>
Haven't done that one yet. (Didnt know about it!). Will try that second today, after attempting the initial boot up after leaving it unplugged all night. (fingers crossed) Of course, the capacitors are likely discharged now after being unplugged and battery-less all night, but you never know...
>Many things have to get synchronized after a CPU swap. It may take a half-dozen reset attempts before everything lines up again and goes.
Thanks for the hope. I will keep trying.
>
I recommmend you remove ALL distractions: all drives, all graphics cards, all PCI cards, all USB devices -- until you get the chime nothing else matters.
Already have done so. Last night I was down to 1 original CPU (CPU A), one memory riser with 1 set of original 1GB DIMMS, 1 bootable HD and nothing else (not even a keyboard/mouse - literally NOTHING else). Will keep trying in this configuration. All I really wanted last night was to hear the "bong" at power on!
Will do a bit more troubleshooting today and will report back.
Thank you!
Richard
Message was edited by: Richard Williams Jr

After migrating to new Mac Pro Dreamweaver won't launch, says missing menus.xml file. How do I resolve this?

After migration to a new Mac Pro Dreamweaver CS6 won't launch. It says it is missing menus.xml file. How do I resolve this?

Hi rustyg12,
Go to Applications/Adobe Dreamweaver CS6/Configuration/Menus/menus.bak
You'll see a menus.xml there - it is a backup copy of the actual menus.xml file that DW uses.
Copy it from that folder, paste it 1 level above (in Menus folder).
Fire up DW. See if it works.

HD problem after connecting to new Mac Pro

Went to our first MUG meeting of the years tonight. And took along my Lacie 500gig firewire external H/D. This was going to be used to demo the new iTunes 7 app. The computer being used was a new Mac Pro duo core intel etc.
When I plugged the H/d in to the Firewire 400 socket on this machine it would not mount. So sadly the demo would have to wait for another meeting.
MORE SADLY.... when I returned home and tried to connect it to my 15" iMac it would not mount..... What has happened??
It is more than obvious to me that my hard-drive has been corrupted by trying to use it with Apples latest entry into the market.
I have swapped cords Ports etc. The drive does power up when I start the computer and sounds like it is going to mount... Profiler does not show it...
any help would be appreciated...

Seems that I have a solution.... It would seem after some troubleshooting that the FireWire 400 port in no longer working.... why? I can only guess. The other FireWire 800 and USB 2 ports are fine.... Thankfully I am still in the warrantee window....
Let me say that this is the first and only problem I have had with Lacie H/D's....other than ...."Make sure that you initialize it before adding any files to it"... I know it is supposed to be Plug & Play with Mac, But I am betting it will think it is connected to a PC....unless you take the initializing step...

I can't find After Effects CC on Mac Pro

On my Apps list is says that After Effects CC is up-to-date, but I've searched the Mac and can only find a older version of After Effects CS5. I've also tried to uninstall the App but it cannot find it. Any Ideas?
(Mac Pro 2.26Ghz Quad-Core Intel Xeon, running OS X 10.9.2)

CC desktop lists applications as "Up to Date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

Can't open After Effects on new mac pro

When I try to open After Effects on my new mac pro it tells me that I cannot use this version of After Effects with this computer. I have the CS6 master collection and all the other apps in the same collection work fine.

MLM_ANIM did you migrate or transfer your Adobe applications to the new Mac Pro? What version of Mac OS specifically are you using?

No Video After Mavericks Upgrade on Mac Pro

I have a 2008 Mac Pro (A1186 - EMC 2180). It previously worked fine running Mac OS X Lion. Based on information gathered from friends and various forums, I upgraded the OS to Mavericks. It worked for a bit but, after a restart, there is no video. The computer powers on but I do not hear the standard Mac OS X tone. At this point, I am only concerned about getting the system up and running on any recent OS (Snow Leopard or above). Whether or not I can get Mavericks on it is secondary.
I'm using a Windows-based keyboard and mouse. My theory is if I can wipe the hard drives, I can get another Mac OS installed from a clean start. Any thoughts?

The default graphics cards for the 2008 are long past their prime. Failure in the graphics card is common.
Once Mac OS X is loaded, the Caps-Lock light is under software control.
Command Eject will bring up this familiar dialog box, whose default (by pressing Return) is Shut Down:
The simplest thing your Mac can do is boot with the Alt/Option key held down. This should draw a gray screen and present an icon for each potentially-bootable volume. It takes a few minutes to finish drawing.

HT1277 After i upgrate my mac pro OS X 10.9.2 (13C64) some application not responding

Similar Messages

Maybe you are looking for