HT1277 How can I force a demand for receipt of my message?

I am a new Mac user.
Under Windows Mail I could ask for a confirmation of opening a mail message.
What do I have to do on my MacBook Pro?
I am sure this is a stupid question but I am not yet accustomed to the Apple logic.
Gracias
Jicé

Hello Jice. For read-receipts Mac Mail is the same as Windows: even if the sender requests a receipt, it is up to the receiver to send it. It depends a lot on your reasons for requesting read-receipts, but because they're voluntary they shouldn't be considered reliable for many purposes. For example, I usually have my mail set to never provide a read-receipt (because it might provide confirmation of a working e-mail to spammers).
Mac Mail doesn't offer a way to request read receipts, but a quick search online found a way to do this by entering a command in Terminal (a software app you'll find in your Applications folder). I'm not endorsing this option, but it's out there if you want to try it: http://email.about.com/od/macosxmailtips/qt/et_request_recp.htm

Similar Messages

Time Capsule and Time Machine: How can I force Ethernet Connection for the first backup ?

Hi,
How can I force the Time Capsule - Time Machine Couple to communicate via an Ethernet cable for the initial backup without changing the wi-fi configuration of the Time Capsule?
I do not want to change the wi-fi configuration of the TC because it appeared that I was not able to restaure it proprerly after a first "ethernet backup".
Please note that I do not want to use my TC to extend my wi-fi network nor create a new one. But, when I disable the wi-fi on the TC, as I want to restaure it, I only can see "expend" or "create a network" options within the wirless config page of AirPort Utlity; "Connect to a network" is not shown in the list!
Thx a lot for your attention,
François
MBP 15' mid-2010
OS X 10.8.2 (12C54)
Time Capsule end-2011 (2TB - v7.6.1)

You MUST change the TC mode to something other than join a wireless network.. because in that mode, TC turns off the ethernet ports.
The join a wireless network is hidden option because apple do not support it and it works poorly.
You can access it by holding down the option key.
You can also save the current settings and restore them after you finish the ethernet backup.
Please note using join means double hop wireless and your TC data speed to the Mac will be extremely slow.. this will also affect your other internet connections and any other computers on the wireless network as it will use most of the capacity for much longer period than directly connecting to the TC.
Basically that is why Apple do not support it.. it is lousy way to work a TC in a network.

How can I force new JVM for new browser instance?

I have an applet with some static variables.
When I run the applet in multiple browser instances that have been opened by clicking on the IE icon there are no problems because each browser instance has its own JVM.
However if I after downloading the applet I open a new browser by clicking CTRL + N or going to File->New Window, the new browser uses the same JVM as the original browser which causes problems with my static variables.
So I'm wondering is there a way to force the new browser instances to always have their own JVM instance?
Cheers,
D

No. Internet Explorer is trash. CTRL-N (or File > New > Window) causes so many more problems, e.g. sharing cookies and therefore also sharing session IDs (!).

How can I turn off ring for notifications e.g. messages but not for calls?

Simple question:
Is there a combination of settings where I can turn off sounds and vibrate for notifications e.g. whatsapp, facebook but still have it vibrate for calls.
E.g. if its in my pocket I'd prefer not to keep getting vibrations, but it would be necessary to know if someone is calling
Thanks

i dont know about whatsapp or other 3rd party apps 0 they may have setting options to do what you want - but for text messages and Facebook posts you can go to Settings/Sounds and set the sound for those 2 things to None

How can I force ITunes store to demand a password before purchases?

A certain teen offspring of mine is ordering ITunes songs at will and regardless of cost or my warnings for her to stop. It's set up so you just go into ITunes store and order, i.e. it bypasses any password question. How can I force the process to demand a password which I have already set? This way she would have to ask permission from me, and I can decide yes or no.

Remove your CC info. Re-add it when you want to purchase then remove it immediately after.
Also, change your iTunes password and log out of the iTunes store.
It's set up so you just go into ITunes store and order, i.e. it bypasses any password question
Select the iTunes store in iTunes.
Log out of the iTunes store.
Find any item to purchase (or download free) then click on Buy.
A window will pop up and ask you to log in to the store.
Uncheck *Remember password for purchasing*. This will require a password a when you make a purchase. If you have removed your CC info, that will also need to be input to make a purchase.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.

Hi I'd like to jump in here. Your app showed me this:
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
          Destinations:
                    Plastic Wrapper [Local] (Last used)
                    Total size: 999.86 GB
                    Total number of backups: 64
                    Oldest backup: 2013-07-24 23:25:11 +0000
                    Last backup: 2013-11-17 01:40:47 +0000
                    Size of backup disk: Too small
                              Backup size 999.86 GB < (Disk used 453.81 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
          /sbin excluded from backup!
          /usr excluded from backup!
          /System excluded from backup!
          /bin excluded from backup!
          /private excluded from backup!
          /Library excluded from backup!
          /Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy

How can I 'force' my Macs to look for each other on the network?

OK, I have an iMac with a wired connection to a router, and a MacBook Pro with a wireless connection to the same router. Most of the time, they can 'see' one another on the network, no problem. But, every so often, even after both have been on for a while, I will click the Network icon and the other computer will not appear as available - this happens even when the target computer can see the computer I'm using to try to access it.
So, here's my question: how can I 'force' my Macs to look for (and find) one another on the network?
Thanks... if you need further information, just ask... - beck

If you are using Tiger, go to
Finder menu -> Go -> Connect to Server
Enter the specific IP address of the other Mac where is says +Server Address+. You can find the IP address by running System Profiler or looking at System Preferences Network pane (on the other Mac).
Once you have mounted the volume you to access, make an alias for it and place it in the Dock or on your Desktop. The next time you want to connect to that server, use the alias.

How can I force iTunes Match to upload a "Duplicate" to the iCloud?

I have one album where the first track was uploaded, and the other eleven tracks are all tagged as "Duplicates." These tracks were not uploaded to the iCloud. How can I force iTunes Match to upload these eleven tracks erroneously tagged as Duplicates?

I'm adding my 2¢ because I just "discovered" iTunes Match yesterday and decided to subscribe thinking there was no downside (doh!).
Well, firstly, there's the enormous downside of Apple's structure not being able to keep up with (what they should have known would be) enormous interest... my iTunes has been matching for >20-hours and has yet to reach half-way up my library. BTW: I thought I read the iTunes Match info fairly thoroughly prior to subscribing and did not see anything about it being for songs vrs full library.
And secondly, and even more important to me, is that Apple's method of determining duplicate songs is not robust enough, especially for classical music and audio books (e.g., LoTR). I have >12000 "songs" in my library, and Match has determined a boatload are duplicates. They are not of course and even if Apple's duplicate-determining algorithm just looked at disc & track numbers it would "know" that. Anyway, there's a fairly good chance I will not have one complete album upload/match out of >500 albums. That's nae Scottish, in anybody's book.
Gotta say, using Garage Band to individually alter >2000 "songs" on the off-chance that may assist Apple's duplicate algorithm to be correct is not gonna happen. If, after the matching/uploading is complete, I still have >even 100-not-duplicate-songs listed as duplicates, I'm getting my $29.95 subscription back.
... and C: does anybody know why Apple's Lion spell check doesn't work on Apple's discussion forums???

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

How can I force Indesign cs5 to open cs5 documents when both cs5 and cs6 is installed?

We are using Indesign with cs5-specific plugins. Due to that we have both cs5 and cs 6 installed on our workstations. Trying to assign cs5 documents (INDD) to cs5, windows refuses to let us choose indesign.exe (cs5). How can we force cs5 to be the chosen application for .indd?

The best way is using Soxy:
http://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
How can i force FF to use the username from previous page when it asks to remember acct info?

This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

How can I force Firefox to remember my password on this site?

The language learning site Tell Me More has a login at http://sr4.tellmemore.com/Login.aspx . My username and password are very long, and I would like to use the Firefox password manager to remember them. However, unlike with other sites, Firefox does not ask me if I want it to remember the password. How can I force it to do so?

That looks like a normal password input form.
Check that you haven't set a block exception.
* Tools > Options > Security: Passwords: Exceptions
You can also check if there are any entries for that site or entries with an empty name listed in the password manager.
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
If you click "Never" then you create an exception that needs to be removed.
See also:
* Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

scottypet
For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
on the properties of the first drag to the Timeline.
To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
Then you import your source media, using the appropriate Add Media choice.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
Please let me know if you have any further questions on this or need clarification.
Thank you.
ATR

How can I force PDF's to open in IE?

I have Windows 7 machines with IE8, Reader 11 with current patches. No matter what setting I choose in manage add-ons, PDF's open in Adobe Reader, instead of in IE. I have reset IE, repaired Adobe Reader and verified settings many times. How can I force PDF's to open in IE?

Yes - those were the first steps. I have also tried the accessiblity assistant options and that also did not allow PDF's to open in Internet Explorer. I was only able to correct it on one machine by fully removing Adobe Reader 11.0.04, removing the HKCU registry for Adobe and reinstalling. This is not feasible on 1300 machines. I would prefer a reg file that I can push, if I can identify which registry entries affect PDF opening in Internet Explorer.

How can i change the ringtone for different contacts. "edit contacts" won't let me`??

how can i change the ringtones for different contacts on the razor. "edit contacts" wont allow me to

Here is the Instructions your Looking For: Down towards the Bottom of the Instructions shows how to set Ringtones for each Contact.
How do I download and use ringtones on my DROID Razr & RAZR MAXX?
Quick links
Set any of your songs on your SDcard as a phone ringtone
Choose Phone ringtones through settings menu
Customize the text message ringtone
Assign a ringtone to a specific contact
Download ringtones from Play Store
1. Set any of your songs on your SDcard as a phone ringtone:
Touch Apps > My music
While the music is playing, touch the phone Menu Key > More > Use as ringtone
The ringtone is set as your default incoming call ringtone and copied to your Phone ringtone list.
Note: The above instructions are for the My music player and not for other players such as Play music.      2. Choose Phone ringtones through settings menu:
Press the Menu key
Touch Settings
Touch Sound
Touch Phone ringtone (If option is greyed out, make sure handset volume is not set to Silent Mode)
Select a Phone ringtone from the list. Press OK to set. (Music files you have set as Incoming Call ringtone from your SDcard will be included in this list along with downloaded and preloaded ringtones.
3. Customize the text message ringtone
From the homescreen or from within the applications tray, touch Text messaging
Press the Menu key (On the left with 4 squares)
Touch Messaging Settings
Touch Select ringtones (if option is greyed out, make sure Notifications is turned on / actived)
Touch on any Notification ringtone to select and hear a sample.
Press OK to set as notification ringtone
CLICK HERE for instructions on creating your own custom ringtone for Text Messages
4. Assign a ringtone to a specific contact:
Press Contacts icon on homescreen or tap on Contacts application from the Applications Tray
Touch and select the specific contact
Press the menu key
Touch Options
Touch V (down) icon next to Ringtone
Choose a Phone ringtone from the list and tap OK to set.
Note: To assign a music/song from your memory card as a ringtone, first follow step1 above and follow step 4 again. 5. Download ringtones from the Play Store
From the applications menu, touch Play Store
Touch search to search for ringtones.
Answers others found helpful
How do I setup and use Bluetooth on my DROID RAZR MAXX?
How do I transfer files to/from my DROID RAZR MAXX?
How do I set up and use the Smart Actions application using the DROID RAZR MAXX?
How do I use the DROID RAZR MAXX for video chat?
How do I force my DROID RAZR MAXX to reboot or restart?

HT1277 How can I force a demand for receipt of my message?

Similar Messages

Maybe you are looking for