HT1277 how to configure mail OSX 10.9 (iMac) with Small Business Server 2003 ?

How to set up mail on brand new iMac OSX 10.9 with Small Business Server 2003

Can you clarify a little more? What part of SBS are you referring to when logging in? Via VPN? Remote Web Workplace? Etc?
I administer a SBS2003 network and actually use a Macbook to do it all. Hopefully I'll be able to help!

Similar Messages

How can I connect 10.4 Mac to Windows Small Business Server 2003?

I have seen some other discussions touching on this topic and have tried the various solutions but am getting nowhere. I can't connect my iBook, which is running Tiger, to our office's server, a Windows Small Business Server 2003. I am the only Mac user and as a Mac devotee actually spent my own hard cash for the iBook. (I work for a non-profit with low funds.) Previously, when our office had a different server and I had Panther, I could access the server. Then it was purely an academic exercise, since I had no need to access the shared files. Now I have a project that requires this, and I am stumped. Our part-time IT consultant is also stumped. We have tried a lot of the suggestions from other posts, to no avail. I suggested to the IT guy that there could be a problem regarding the encryption of my password, and I think he tried that. We have tried various versions of the domain name. The server comes up in the list when I follow the "go--connect to server--browse" path, but we come up empty. We've gotten error message -36, a message that we are trying to connect an alias to something that can't be found, and a message that we don't have enough information to go any further (something like that). I am writing from my eMac at home, so I can't reconstruct the situation right now. I have found in my extensive internet search that Thursby has something called ADmitMac that is pretty expensive software ($119 for one person) that I could install on the iBook and could help me access the Windows Small Business Server 2003 without doing anything else to the server. Does anyone know if that would that work? Any suggestions would be so appreciated!
eMac and iBook Mac OS X (10.4.4)

I have specific errors listed below:
Actually, I have been encountering similar problems. I have an end user who wants to connect to an SBS 2003 server, and can not connect/use RWW because the Active X will not work, cannot use the VPN in PPTP mode because Windows 8 disallows the connection
("Error 942: The connection could not be established because the authentication method used by your connection profile is not permitted for use by an access policy configured on the RAS/VPN server."), and cannot use an L2TP VPN connection because it requires
a certificate "Error 766: A certificate could not be found. Connections that use the L2TP protocol over IPSEC require the installation of a machine certificate, also known as a computer certificate.". I attempted to utilize the SBS Connection Tool downloaded
from RWW, but it fails with a proxy error ("Unable to execute custom script (Configure proxy settings for IE). Required file could be missing." - likely due to the PPTP tunnel it tries to use). I went so far as to install the Enterprise CA on the server, installed
the Hotfix
(KB922706) so that the website could be accessed from Vista and above, and installed the requested certificate. The VPN fails to connect after
it times out and fails to negotiate a connection. This last one is "Error 789: L2TP connection attempt failed because the security layer
encountered a processing error during the initial negotiations with the remote computer."
I have screenshots to share if anyone cares to see. I really just get the feeling that Microsoft is trying to kill SBS 2003 by ingoring it into oblivion.
The VPN works fine with Windows 7 clients by the way.

OSX 10.4.8 - Microsft Small Business Server 2003

Hi,
having utmost problems connecting to out SBS 2003 server with my MacBook Pro. I can't tell which part of the address/password is not being accepted or correctly transmitted. I have tried all the normal instructions. I have no problem when connecting to the WIN2000 server with the same address/password, the same goes for the other computers in our network. The problem is definately SBS2003. Any suggestions?

Can you clarify a little more? What part of SBS are you referring to when logging in? Via VPN? Remote Web Workplace? Etc?
I administer a SBS2003 network and actually use a Macbook to do it all. Hopefully I'll be able to help!

How to configure the client tnsnames.ora parameters with a MTS Server

i have modified init.ora and start my oracle
as a MTS instance.
my client tnsnames.ora is the dedicate server
model.
how can i modify it and my clent can use
MTS server.
null

Hi,
I dont think u will have to configure anything seperatley on the tnsnames.ora file to connect to a MTS Database.
I Hope i am right.
Regards,
Ganesh R

How to install Small Business Server 2008 in an existing Active Directory domain

It is shown on this page:
http://support.microsoft.com/kb/884453, "How to install Small Business Server 2003 in an existing Active Directory domain".
Is it possible to do this with SBS2008 ?
If "YES", are there any published information about the procedure ?

Yes, it is. Thank you very much.
But there is something that confuses me - I want to migrate from Win2003Std to SBS2008. And also, I want to keep the existing Win2003Std as a second DC for a long time.
But it is written in the shown article:
... After the migration is finished, you must remove the Source Server from the network within 21 days. ...
Is this rule mandatory for the scenarios where the Source Server is Std, not SBS ? As I know, I can have more than one DC(Win2003Std/Win2008Std) together with SBS2003. But what about SBS2008 ?

How do I remove Outlook 2013 profile that refers to Exchange Server 2003, Outlook won't start

I have Office 2013 Pro preinstalled on my new Windows 8.1 (64bit) machine. I am on a domain with a Small Business Server 2003. The server has Exchange 2003 installed on it but I've never used it. I use Google Apps for Business for my email.
I clicked on the Outlook tile for the first time in the Start window. It took me to an email account set-up screen and set up a profile for me.
But then it came back with two error dialog boxes. One says "The resource that you are trying to use is located on an unsupported version of Microsoft Exchange. Contact your e-mail administrator for assistance." The other dialog
box says "Cannot start Outlook. Cannot open the Outlook windows. The set of folders cannot be opened. The file C:\Users\mark.hcs\AppData\Local\Microsoft\Outlook\<e-mail address>.ost is not an Outlook data file (.ost)."
Now every time I click on the Outlook tile it comes up with the same dialog and I can't get into Outlook. I've tried using the Mail control panel applet but, when I click on it, it does nothing.
What can I do to set up Outlook to not look for the Exchange Server so I can set up my e-mail account.
Mark
As Socrates said: "I drank what?"

Hi,
As far as I know, Outlook 2013 cannot connect to Exchange 2003 or an earlier version of Exchange:
http://technet.microsoft.com/en-us/library/cc178996(v=office.15).aspx
Thus, it’s expected behavior that there will be error when use Outlook 2013. I recommend you update your Exchange server or use Outlook 2003/2007/2010.
If you have any question, please feel free to let me know.
Best regards,
Angela Shi
TechNet Community Support

How to configure Mail Services in B1

Hi All,
I want to cinfigure the mail services in SAP B1 currently I am using SAP 2007 SP00 PL 12 My client wants that the daily reports and the Sales order should be mailed by B1 to cuntomer mail id. PLease tell the process to how to configure mail services in B1.
Thanks & Regards
pankaj Sharma.

Hi Pankaj Sharma,
The suggestion above would be a good solution to you. However, if you do not want to use this add-on, you may just configure SBO-Mailer to perform the task. You may check all available setting for the mailer and read through Administrator Guide for how to set it up.
Thanks,
Gordon

How to configure mail using portal collaboration

hi Guys..,
pls tel me
how to configure mail using portal collaboration and its uses..
thanks
regards
kamal

Hi,
Two Configure Email, first
You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
Then create a Groupwaretransport
implement SSO between your Mail server and your EP...
and finally
Create a Mail service...
More Info is available at below link..
http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
and have a look at the thread raised by be on Calender Configuration...
Collaboration calendar : No transport has been configured for the calendar
Regards,
Srinivas

How to Configure Mail in ECC5.0

Dear All,
Please guide how to configure Mail in ECC5.0
i have Activate / enabled SMPT using the T-code : SICF
using Transaction : SCOT
for SMTP Connection :
mail host : localhost
mail port : 25
Code Page : ???????????? what should i give i have given 1100 SAP internal (correct or wrong) Please guide
Supported Address Type:
Selected Internet
what should i give in "Address Area" and "output format for SAP documents"
when i am sending a mail using : SWBP and checking in SOST message error 272 i am getting.
Regards
Shankar

Dear all,
we are not using Exchange Server.
we enabled the Port 25 . we are able to telnet to the mail server.
Using SICF activate SMTP port.
when i am trying to send using SBWP t-code : getting
"error during send process " when we check further " you do not have a sender address in the choosen communication method".
Regards
Shankar.

How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

How to configure mail service in DRM 11.1.2.3.500

How to configure mail service in DRM 11.1.2.3.500.
There is a feature in Workflow Models to Notify users by sending mail.
Can anyone help me find from where to configure mail service.

Hi,
If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows...

TS3276 how to configure Mail ?

Hi !
How to configure Mail only to fetch a specific amount of messages on its first use?
I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
Thanks a lot!

Hi !
How to configure Mail only to fetch a specific amount of messages on its first use?
I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
Thanks a lot!

How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.

Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari

How to configure the services(WDA) in ESS with EHP7

Hi Experts,
I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with EHP7.currently we are using
ECC6.0 EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
How to configure the service in launch pad with WDA.please guide me the step by step procedure.
Please share the config guide if anyone have.

hi sap scn ,
Tips & Recommendations for customizing ESS Menu (WD ABAP) - ess launchpad
Summary of configuration options in ESS Personal Information scenario -personal information
go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
if any other revert back again

[SOLVED]How to configure pptp vpn start on boot with netcfg?

I've configured 2 profiles:
eth0 and ppp0, where ppp0 is a pptp vpn tunnel.
$ ls /etc/network.d/
eth0 examples interfaces ppp0
$ cat /etc/network.d/ppp0
CONNECTION='ppp'
INTERFACE='ppp0'
PEER='dxt'
PPP_TIMEOUT=10
$ cat /etc/conf.d/netcfg
# Enable these netcfg profiles at boot time.
# - prefix an entry with a '@' to background its startup
# - set to 'last' to restore the profiles running at the last shutdown
# - set to 'menu' to present a menu (requires the dialog package)
# Network profiles are found in /etc/network.d
NETWORKS=(eth0 ppp0)
# Specify the name of your wired interface for net-auto-wired
WIRED_INTERFACE="eth0"
# Specify the name of your wireless interface for net-auto-wireless
WIRELESS_INTERFACE="wlan0"
Manually, I can start up ppp0 correctly.
$ sudo netcfg -u ppp0
:: ppp0 up [ BUSY ] Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
CHAP authentication succeeded
MPPE 128-bit stateless compression enabled
Cannot determine ethernet address for proxy ARP
local IP address 10.100.3.132
remote IP address 10.100.3.1
[ DONE ]
$ ip addr list dev ppp0
8: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1496 qdisc pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 10.100.3.132 peer 10.100.3.1/32 scope global ppp0
But after booting, only eth0 is up. How to configure ppp0 to start on boot with netcfg?
Last edited by rchiang (2012-12-21 01:09:32)

Thanks a lot for your instruction.
netcfg works now!
chris_l wrote:
Did you
systemctl enable [email protected]

HT1277 how to configure mail OSX 10.9 (iMac) with Small Business Server 2003 ?

Similar Messages

Maybe you are looking for