HT1277 I can't do an update because MAIL will not shut down!!!! The Quit Mail choice in the drop down menu is gray and does not repond!

I am not able to do an update because mail is open.

Hi Charlie,
Hold these keys to get a Force Quit to come up where you can choose Mail...
CMD+alt+esc
Sometimes alt is option key.

Similar Messages

  • The printed material on my Bank Atlantic site has shifted up and does not allow me to enter. I can go in to bank atlantic from I.E. Does anyone have a solution??

    If you can go to the Bank Atlantic site, you can see the printing on the left side that gives bank information, and the 2 boxes for sign in and password. The printing in this area for some reason or other has shifted upwards and is not aligned with the page. As a result I cannot enter my name or password.

    If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Trying to unblock iPhone 4s.  made all the steps, at the end of restoring i get an error no. 9, and does not finish the restoring, who can help me?

    trying to unblock my iphone 4s, because i moved to another country and need to use another carrier.  followed all the steps to restore but at the end i received an error no. 9 and can not finish the restoring.  i asked my older carrier for the unblock permission, it should not be a problem. can someone help me?

    Read here:
    http://support.apple.com/kb/TS3694#error9

  • Software Update can't check for updates because of a network problem....after firmware update

    I just bought a MBP w/Lion (10.7.4) and ran software update.  The first two items I updated were firmware for SMC (ver 1.5) and EFI (ver 2.7) and now my MBP says: "Software Update can't check for updates because of a network problem."  However, I can connect to the Internet to surf the web just fine.  This is the only update I've made.  Can firmware be uninstalled?  If I reverted to the image on my external drive that I did with CCC prior to the update, would that fix it?

    Hi! i hope i'm able to explain what i worked out and what worked for me. I had the same message coming up "no internet connection, run network/internet diagnosis" etc etc. Internet connection was fine. What i finally did:
    Open airport, check internet, internet options ; with me, IPv6 was set as  this (the letters are in german order and not in a english order, sorry...):
    In system prefs, network/TCP/IP  IPv6 was set to "automatic":
    I did change the settings in Airport back to "Link Local" and Software Update worked immediately normal whithout restarting the computer.
    No idea what changed the settings; however i did run permission repairs beforehand with no connection to any problems, just as a normal kind of 'maintenance routine'.
    Hope this helps others, it worked for me.
    Cheers
    Csico 

  • Software Update can't check for updates because of a network problem.

    The software update app fails with following error msgs. But all network functions fine.
    +A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.+
    +Software Update can't check for updates because of a network problem.+
    Deleted the software update plist files in $HOME/Library/Preferences, $HOME/Library/Preferences/ByHost, and HD/Library/Preferences, as per some posts. no effect. Problem persists.
    Any Ideas?
    Thanks

    Same here
    The last update I managed to do without problems was +Java for Mac OS X 10.5 Update 5+ - since yesterday the update process has become much, much slower and when I try to install +Security Update 2009 005+ and +iTunes 9+, it fails, usually with the aforementioned error, but also sometimes with Error 400 or Error 600, IIRC.

  • Software update can't check for updates because of a network problem mac

    hi i am facing below probelm on my mac ... i have done all the ip setting on my mac  Error is software update can't check for updates because of a network problem mac.Can any one please assit me...

    Can  Some solve my problem.....

  • "Software update can't check for updates because of a network problem" - help!

    Recently, when I perform a software update check on the pulldown Apple menu, I get this error:
    "Software update can't check for updates because of a network problem."
    The only problem is that my network works just fine. I use the internet and get emails without any problem. But I can't figure how I can fix Software Update.
    The only relevant updates have been for Glims and 1Password. Oh, and note the same problem trying to access the App Store; I just get a "Can't connect to the App Store" error.
    Any hints?

    I have to solve all my own problems.
    The problem was due to Little Snitch. Once I upgraded from 2.4.0 to 2.4.2, my system works swimmingly again.
    FIXED!

  • After installing Lion, the Software Update "can't check for updates because of a network problem.But I've no network problem. My internet is working properly. could you help me?

    After installing Lion the Software Update "can't check for updates because of a network problem". But I've no network problem. My internet is working properly. Could yoy help me?

    Hi All
    Same problem this morning but now resoloved.
    Update require using the following url  support.apple.com/kb/DL1437 update for lion 10.7.1
    updates now work with this update
    Hope this helps
    Thanks

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • TS2771 hi everyone, can you help me, because my ipod touch 5th gen, is not opening since this morning, i am just listening to music last night. And its not working anymore. THANK YOU

    hi everyone, can you help me, because my ipod touch 5th gen, is not opening since this morning, i am just listening to music last night. And its not working anymore. THANK YOU

    If not successful try the ramaining items of
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Can I change the order of lines in a drop-down menu?

    Can I change the order of items on a drop-down menu? Specifically, the "open" menu that comes up when I right-click on a link.
    Putting "open in new tab" on top of "in new window" makes sense, of course, since it is used more often. But I do a lot of surfing, and had the old position in muscle memory. Re-training my brain to click on the first line instead of the second is taking a long time, and makes me grumbly.
    I'd love to put it back to the old order. Can I? and, if so, how do I do it? (Please give me detailed instructions, IOW, please assume I am a complete simpleton, because sometimes I am.)
    HP G62 w/ Win 7 home premium. If it matters, it's 64-bit.
    And my old desktop, which has, yech, Vista. (I haven't upgraded it to F4 yet.)
    Thanks,
    Roo

    Where is that drop-down list, on a webpage?
    Please provide a screenshot of that issue. <br />
    https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem <br />
    It is best to use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed a maximum file size of 1 MB.
    Then use the '''Browse ....''' button below the '''''Post a Reply''''' text box to upload the screenshot.

  • How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
    Customized Progress Indicator - Captivate blog
    If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
    And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

  • Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

    Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
    How/Where to increase the relationship count?
    The message which I can see :
    Warning:
    This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
    Thanks

    This really brings up a larger topic around change management.
    The questions you should start with is
    1. What kind of change is happening to the raw material? 
    2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
    3. Who needs to approve this change?
    If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession.   Get Latest Revision will automatically switch out the material with the latest approved version.  This logic is also configurable in case you need to add additional guard conditions.   We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
    If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification.  Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur.   Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks. 
    Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes.  We can also schedule a change management training session for everyone where we can share our vision and tools available for change management.  This topic is quite large and generally requires a lot of business process discussion beyond just the tools available. 
    Thanks
    Kelly

  • When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

    When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

    Try restarting your computer and your router.
    If there is a specific error code, take a look at this article.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694

  • Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit

    Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit. What can be causing the issue?

    Hello, please checkout my post concerning lagging issues.
    I've also provided a link to a video I've recorded showing the Illustrator behavior on my iMac 27"
    Adobe Illustrator Cs6 Lagging Extremely Slow on Yosemite 27" iMac i7 late 2013

Maybe you are looking for