HT1277 i did try all that and I still can't seem to send e-mail I can receive it though

I tried to send e-mail and can't seem to tried all suggestions used my ISP for quite a while went through all the suggested steps several times I can receive e-mail but cannot send it forward it am asking if there is any other things to try 

Your SMTP server host name setting, your SMTP server port setting, whether SSL/TLS is needed or not, amd/or your server login username or password credentais, some combination of these, are likely incorrect here.  
These are the typical triggers, when a send (or a forward) fails.
If you have more than one mail account configured within Mail.app, ensure that the mail account you are testing with is configured with the expected SMTP server, and is not referencing the SMTP server for another account.
Connection Doctor (available in the Mail.app menu bar Window menu) can sometimes help figure out some of these connection problems, too.

Similar Messages

  • TS3276 The mail doctor is saying my username and password are incorrect. They were not. I changed my password anyway, and it still won't let me send my mail. How do I fix this?

    The mail doctor is saying my username and password are incorrect. They were not. I changed my password anyway, and it still won't let me send my mail. How do I fix this?

    try to log in using webmail. if you can't do that, then issue is solved.

  • HT1535 so I've done all that and I still can't add a playlist I've created in iTunes to the iPod...?

    I've followed the instructions to tell the iPod that I want to manage music and video manually, but I still can't add a playlist I've created in iTunes to the iPod...

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Help !!!!!!!!!! I upgrade my itunes to 10.5, But, my cpu start to reach 100%, and I cant connect to Itunes store! Morever , I did try something that ppl saying delete all program and reinstall again! It dont work to me!

    Help !!!!!!!!!! I upgrade my itunes to 10.5, But, my cpu start to reach 100%, and I cant connect to Itunes store! Morever , I did try something that ppl saying delete all program and reinstall again! It dont work to me! It drive me CRAZY!!!! HELP PLEASE HELP!!!!

    It took about an hour to upgrade my iphone. You're also left a couple of times with a blank screen on the iphone whilst it does things in the background which is a bit confusing. Suggest you wait - it starts doing things again (like reload your apps and then your photos etc) after you think it's finished. It's finished only when it says it is.....

  • Went to watch a video on You Tube that I have watched before on my iMac and got the prompt that I had to upload Adobe Flash Player.  Did that, and am still getting the same prompt and can't watch any videos at all.  What is going on here, Apple??

    Went to watch a video on You Tube that I have watched before on my iMac and got the prompt that I had to upload Adobe Flash Player.  Did that, and am still getting the same prompt and can't watch any videos at all.  What is going on here, Apple??

    I do not know how to do this with an Apple TV (I don't have one), but as far as I know Apple TV only does mirroring.
    If you have an HDMI cable long enough to reach your TV from where you sit, then it's easy. The TV could be set up in Extended Desktop mode (mirroring off) as if it was simply another computer monitor, and then you could just drag windows to it. If you have the Displays icon in your menu bar, that's where the setting is, or if the icon is not there, then the setting is in the Displays system preference. But again, that's for conventionally connected monitors, not Apple TV. If you don't have an HDMI cable and wanted a long one that's affordable you can get those at monoprice.com.
    The answer we are still waiting for is if anyone knows if Apple TV can be used in extended desktop (non-mirroring) mode.

  • HT202358 can't open my iPhoto it says i need the upgrader did that and it still won't open.

    can't open my iPhoto it says i need the upgrader did that and it still won't open.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • My iPad will not update apps.  I did try all previous suggestions.

    My iPad will not update apps.  I did try all the suggestions.  When I click on the rapidly growing number of updates, the screen stays blank.  Nothing is being downloaded.  I have worn out the re-boot function.

    This is a problem that many users are experiencing now. Apple is working on a fix.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this, because you cant fix it. It is a workaround only.
    you can update your apps in iTunes on your computer and sync the, to the iPad as well.

  • HT1766 I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved

    I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved. Can anyone help?

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Ive migrated my apps from an old mac to my new mac. When i try to open my CS5 programs it get a pop up that says i need to install the legacy java SE 6. Ive done that and it still does not open?

    Ive migrated my apps from an old mac to my new mac. When i try to open my CS5 programs it get a pop up that says i need to install the legacy java SE 6. Ive done that and it still does not open?

    I'm having a similar problem...but mine results from an OS upgrade from 10.6.4 to 10.8.5.
    Where did you access a clean copy of Java SE 6?  The link at adobe for archicval plug-ins is a dead download (and it doesn't appear to contain Java SE 6.).
    Jerry

  • HT201274 my device have now 8 hours  after i did Erase All Content and Settings doing erasing , is this normal

    my device have now 8 hours  after i did Erase All Content and Settings doing erasing , is this normal

    Something has gone wrong, as this should have happened almost instantaneously. Turn your phone off, then force it into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • Hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

    hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

    http://support.apple.com/kb/HT1808
    Regards.

  • HT1277 all of a sudden I am not able to send out mail. I have checked and rechecked my account information including incoming and outgoing server info.

    all of a sudden I am not able to send out mail. I have checked and rechecked my account information including incoming and outgoing server info. Does anyone know what the problem might be? Thanks

    If you're having trouble sending mail, then either the SMTP (outbound) mail server settings — the server, the port, the user, the password, and whether SSL is in use or (unlikely) not — are incorrect, or the mail server is offline or has been reconfigured. 
    The SMTP (outbound) settings are in Preferences, but are buried rather deeply.  Select Preferences > Accounts > select the account > switch the outgoing mail server (SMTP) to Edit SMTP Server List... and then select the SMTP server from the list, and verify that the settings are correct with your ISP, and that your username and password are correct.
    The required settings vary by your particular mail ISP; you'll have to check with the ISP for the server and login details.
    To test settings, select Window > Connection Doctor > then (when the tests fail) show the details, and (if you can't sort out what happened) sanitize the settings and post the output here.
    Caveat: do not repeat password tests with the mail server, as various mail providers can be configured to assume these are a password brute-force attack, and lock out repeated login attempts.
    Caveat: never, ever, ever, ever, ever, ever, ever not-at-all enter a password when Mail pops up a dialog box with the "OMG YOUR PASSWORD IS WRONG!!!!!!!!!!! PLEASE ENSURE YOU CANNOT LOG IN AGAIN!!!!!" dialog box.  (I'm paraphrasing that error dialog box slightly.)  The correct answer to that Mail.app password dialog box is almost always "cancel" button.  Passwords stored in Keychain generally don't get lost or corrupted, and trying random passwords as that dialog box encourages just gets you locked out of various servers, and...

  • TS4062 I lost all of my contacts and notes when attempting to move over music. When I try to restore the backup the day I want to restore to is not present. I do see a copy on my I cloud but I can't seem to retrieve it. What can I do?

    I lost all of my contacts and notes when attempting to move over music. When I try to restore the backup the day I want to restore to is not present. I do see a copy on my I cloud but I can't seem to retrieve it. What can I do?

    Hi bluegrandpanash,
    Thanks for visiting Apple Support Communities.
    If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Best Regards,
    Jeremy

  • I just wrote all that and submitted and now you want me to write it again??????

    I just wrote all that and submitted and now you want me to write it again??????

    Hi Ronn,
    It looks like you are encountering the problem while printing from Acrobat. If that is the case could you please request the same on Acrobat forum(http://forums.adobe.com/community/acrobat/printing_%26_prepress).
    I'm sure Acrobat folks would help you on this.
    Regards,
    Dhirendra

Maybe you are looking for

  • I can no longer get my email to open

    My email has stopped working on my IPAD. It has worked for months but stopped. I have deleted and re-entered my email address....I have syned again....still doesn't open email. Any help would be appreciated.

  • Transaction BP start in sales area - status view screen

    I'm calling from outside of R/3 (from CRM). I want to start online transaction BP started, but I want to start up in the sales area, and the screen status. This is crucial because it is must be done several times by the users. I have tried to see exa

  • How can i transfer my sms from iphone 3gs to iphone 4s?

    Hi I am thinking about getting an iphone 4s How can I transfer my sms from an iphone 3gs to an iphone 4s?

  • F110 - Posting orders: 8 generated, 7 completed

    Hi, One of our payment in a payment run was not completed. In payment log, payment document was generated and there were no errors.  But in FB03 or table BKPF, there is no such document number. In other words, a document number was skipped. I checked

  • Using JButtons in a JTable

    I'm trying to find some information about how to use a JButton within a cell of a JTable. I'm able to insert the button using a custom cell renderer. Basically I create my own renderer which is triggered for JButton.class. That works well. Of course