HT1281 How to do this with Airport Utility V.6.0 ?

This functionality vanished with v.6.0 - ?

Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion to get the functionality that you need. Keep both 5.6 and 6.0 on your Mac and use the one that you want.
AirPort Utility was available on the same day....January 30....as AirPort Utility 6.0, but apparently a number of users missed this.

Similar Messages

  • How do you archive a disk with AirPort Utility version 6?

    Has anyone figured how to Archive Disks with AirPort utility version 6?  I can see both drives but it refuses to do an Archive in version 6?  (I don't even see a button to do so in the UI?)

    Please download and install AirPort Utility 5.6 for Mac OS X Lion
    Keep both 6.0 and 5.6 on your Mac (6.0 cannot be deleted).

  • HT5022 10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

    10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

    You are trying to install a version of Airport Utility earlier than 6.0, correct? If so see the following: Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • Printer problem with Airport Utility and Epson CX5500

    Hi,
    I recently bought an iMac '24 2.66 Computer and was able to set up my internet through an airport. When it came to hooking up a wireless Epson CX5500 printer, the airport recognized it, but when it came to print in the printing queue it simply wont print. I was able to find a very helpful post that would possibly be my next step in fixing it (probably just a program error or hook up)
    Here is that post:
    ideapod
    *Posts: 5*
    *Registered: Jul 16, 2007*
    *Re: Problem connecting a Epson USB Printer*
    *Posted: Sep 29, 2008 5:42 AM in response to: tonys28661 *
    +Hi there,+
    +I had the same problem, but with an Epson CX5500.+
    +Firstly, BTW - I found out there IS a list of supported printers: http://support.apple.com/kb/HT1370?viewlocale=en_US. Before you scream - "that's leopard you idiot"; in the table, if the printer is listed with a MODERN driver, then it will work with Airport Base Station - eg TimeCapsule.+
    +Next. My problem was solved by deleting the spaces put into the printer name by timecapsule. When the printer is recognised it was called "Epson CX 5500". My Macbook printer service then set up a Queue which was mdns://...Epson%20CX%205500... Note - substitution of %20 for space in the name. I removed the spaces from the name via airport utility, manual set up, printers. Now the macbook could print to it.+
    Cheers,
    Mark
    The problem that i have is the step by step process of altering this or finding it. As i made the name of the shared printer EPSONStylusCX5500 but could not acess the printer name one to change it. The url link still shows the 20%. If someone could please take the time to explain on how to do it, then maybe just maybe, i would be able to print wirelessly. Any other ideas or even cheap printers that would work without a problem as i would simply go out and buy one instead. Thanks.

    When you say.....
    I cannot get it to work with AirPort Utility....
    What does not work?  Can you open up AirPort Utility and  take us through the steps? What happens after each step?

  • I used to drag and drop newly loaded CD's from Recently Added to one of my iPod Classic playlists. I have no idea how to do this with the new version of iTunes. I thought perhaps checking Sync might give me a clue but it warned me Syncing would wipe conte

    I used to drag and drop music loaded from CD's from the Recently Added folder to a Playlist on my iPods Classic. Can't see how to do this with new iTunes version. Probably need to sync somehow but when I checked on Sync it warned me it would wipe out my iPod contents. Don 't know why Apple makes something that used to be simple so difficult. Can't even figure out how to display both my library and iPod contents on same screen.

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • How to do this with message mapping in PI  ?

    Hi All,
    Field 1 = 100 characters having values in  first fifty characters and last 50 characters blank . I need to remove all the first 50 characters with blank and pass 100 blank characters .How to do this with message mapping
    Thanks

    Adding to that, since usually a tab = 8 spaces. What you can do is to open notepad, press tab 4 times. Copy it and paste 3 times, afterwards press space 4 more times and you get 100 spaces.
    Regards,
    Mark

  • HT201303 last time i bought apps by using visa gift card so iam trying to use the kind of visa gift card and the system is denying the method payment ....any idea how to solve this with my itune account ?

    last time i bought apps by using visa gift card so iam trying to use the kind of visa gift card and the system is denying the method payment ....any idea how to solve this with my itune account ?

    A few reasons I can think of, but instead of shooting in the dark, lets check with experts who can look at your account.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

    I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

    It may be due to Continuity
    The following quote is from  Connect your iPhone, iPad, and iPod touch using Continuity
    Turn off iPhone cellular calls
    To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.

  • Aggregating table - how to solve this with ADF Faces

    Hello.
    I am trying to solve something that would typically be really simple. However, now i' using ADF faces which is new to me and i'm stuck.
    I want to show a table of rows with aggregated numbers (department in example below) and then "open up" any row by clicking on it to display the numbers that make up the aggregate (the guys in the helpdesk department in the example below).
    Something like this:
    DEPARTMENT SALARIES
    +Sales                  1.234.567
    +Warehouse         3.425.553
    -Helpdesk 655.000
    Joe 155.000
    Jill 300.001
    Burt 199.999
    +Personnel           546.225
    +Management     9.646.383
    And to make things more complicated, some of the aggregate rows in my real life example don't have any underlying rows. They just have the total. Can anyone give me hint about how to do this with an ADF Faces-control? I need to show management this can be solved quick and simple with ADF Faces, so i can convince them that it is the way we should be working in the future.
    Edited by: GoodCoffee on Jun 2, 2009 4:15 AM. Trying to indent the three rows under "Helpdesk"

    Hi,
    if you use ADF BC as the business Service then you can create a transient attribute (one that does not ave a database column ) and compute the total. Using JDeveloper 11g, you can use a Groovy expression. The below example calculates the Overall Salary paid by an department. The transient attribute is defined on the Department Entity Object
    XML View
    <Attribute
        Name="SumSalary"
        ColumnName="SUMSALARY"
        SQLType="NUMERIC"
        Type="java.lang.Long"
        ColumnType="NUMBER"
        IsQueriable="false"
        IsPersistent="false">
        <TransientExpression><![CDATA[Employees1.sum("Salary")]]></TransientExpression>
      </Attribute>The Employees1.sum("Salary") string is the Groovy expression that you need to add for the attribute. You select the created transient attribute in the EO editor and press the pencil icon. Then you select "Expression" as the value type and add the string.
    See: http://www.oracle.com/technology/products/jdev/11/how-tos/groovy/introduction_to_groovy.pdf
    Frank

  • Time Capsule 4 gen. with iMac OS X Lion   3 Windows PC (XP OS, Vista OS, Seven OS) cable modem with TC as Wi-Fi. Time Machine on iMac found TC for backup easily. Have Wi-Fi access on PC XP with Airport utility but cannot create TC.

    Installed today Time Capsule 4 gen. with iMac OS X Lion. I also have  3 Windows PC (XP OS, Vista OS, Seven OS). Internet Access is cable modem with TC as Wi-Fi. Time Machine on iMac found TC for backup easily. Have Wi-Fi access on PC XP with Airport utility but cannot create TC. Does the Airport utility under Windows is way to access backup capabilities with TC ?

    The TC is really just an external networked hard disk plus router.. you can access the hard disk and place files on it from any computer. You can backup any computer to the TC but it will have to use a backup software in windows.. there are literally thousands available. The built in msbackup is horrible.. but you can download lots of different software and buy then online for not a lot. Macrium Reflect has a free disk image backup, and when you pay for it includes incremental. I think disk images are well worth it, as they recover much better.. and their is a proper method of recovery using a boot cd.
    BTW the TC space is not endless. And it is designed to hold a large number of incremental backups.. so anything you do in backing up several machines will make the number of backups limited. Remember you can also use a usb hard disk plugged in as a Network accessible disk. But it has to be formatted HFS+ or Fat32.. the later being highly undesirable.

  • Time Capsule Connectivity Problem with Airport Utility and Mavericks

    I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

    When you say.....
    I cannot get it to work with AirPort Utility....
    What does not work?  Can you open up AirPort Utility and  take us through the steps? What happens after each step?

  • TC will not communicate with Airport Utility error -6753.  Wireless, internet (unsecure), and backup work fine., ,

    TC is not communicating with Airport Utility (error -6753).  I do have a flashing amber light.   The wireless (printer, TiVo), internet (unsecure), and backups to Time Capsule work fine.  I have done many hard and soft Resets, but that has not helped.  Airport utility show the TC as amber and but won't let me findout the status of what is causing the problem.  

    What mode is the TC running in, router or bridged? You can sometimes have issues if the TC is bridged and the network is getting IP in a different subnet.
    I would recommend disconnecting the TC from the network and plugging it directly into the Mac via ethernet. You may also need to do a reset if the dhcp is off, as in bridge.
    Also note are you pressing the reset for long enough that the led on front starts blinking rapidly.. hold it in for 15sec to be sure.

  • HT1281 Is this no longer possible with Airport Utility 6.1 ???

    I would like to "Archive" our Time Capsule Drive to an external using the USB port, as outlined in the above article for Airport Utility 5.3.1 "or later", but this function does not appear in 6.1.  Is it possible?  If not, why not?!

    It is not a function provided in v6 utility.
    Why?? Because Apple decided you don't need it. And what Apple decides is for your best interest.. you just say thankyou sir for making all my decisions for me.. it makes life easier when I am ruled .. etc.
    It is slow.. and the TC will be out of action as far as backups while it does it. But IMHO there was no need to scrap it.
    Apple have a set of instructions on backing up the TC.. with USB plugged into the computer.. this is actually much faster.
    http://support.apple.com/kb/HT5096
    The best way if you do still want to use archive.. and lots of other things that got eliminated in v6 toyland utility.. is to install v5. This is not that difficult even on Mountain Lion.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0
    I have both available on the Mountain Lion MBP I have.. I only use the v6.1 to answer support questions though.. as it adds nothing and is a subset of v5 tools.

  • I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

    I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome. 

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

Maybe you are looking for

  • Hotmail and Mail on Mac

    I read other posts on how to get the mail program to access hotmail. There are two users on my computer and I got it to work on one of the users but not the other. Do I have to do something else to get it to work for two users? Thanks!

  • A way to change metrics to 1 digit after comma?

    Hello. I have just noticed Flash CC is using 2 digits after comma, and im just wondering if there is a way to change it to use only 1? In my work i ususally have to avoid having any other digit after comma in symbols position other than 0 and got use

  • How to enable DHTML viewer in Java Infoview Portal

    Hi, I am using BOXi 3.1.  I have created a crystal report with cross tab, having the drilldown hyperlink enabled.  But when I export the report to Infoview I am not getting the drill down option.  When I searched the manual its mentioned that drill d

  • How to display xml code in page?

    Hi,    I have a string which content is a xml file, I want to display the content of string in xml mode, such like dispalying a xml file in IE browser. How to do it?     Thanks a lot!

  • HT202667 Is there a workaround to adopt an existing iCloud address to work with my AppleID?

    I have an old iCloud / @me.com email address I would like to use with my Apple ID. Apple won't let me register this email because it says it is already its own AppleID. Is there a workaround for this?