HT1296 Having a problem with new iphone 5c. have backup iphone 4 and trying to move info to iphone 5c. is not working. when plugging into computer backups from iphone 5c which does not have contacts on it. what am I missing?

I have backuped my iphone 4 on itunes.
plugged in iphone 5c- automatically backups the new phone and gets rid of the obackup on the iphone 4
How to transfer information from iphone 4 to iphone 5c

Is your 5C already setup? If so, you'll have to erase it before you can restore the backup of your iPhone 4 to it: Settings>General>Reset>Erase All Content & Settings.

Similar Messages

  • IPhone will not charge when plugged into computer

    My phone was not working, and so I took it to the apple store nearby. Here were the problems:
    -error message saying "this device not made to work with iPhone"
    -would not charge when plugged into computer OR wall charger
    -person on other end of phone calls said i sounded really far away and had trouble hearing me
    -when i shut it off, it restarts itself immediately
    -cant do a manual reset holding the power and center buttons at same time
    -when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
    At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
    Is there any way they will replace my iphone at no charge?

    Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
    And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
    I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
    But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say.

  • Camera not working when plugged into certain USB ports

    I just purchased a Creative Live! Cam for use on my dual G5 running 10.5. When I plug the camera into the USB port on the front of the Mac, it works fine with iChat.
    However, when I plug it into the back of the monitor (older style Cinema display), it says it is in use by another application.
    Any idea how to resolve this? The cable isn't terribly long and the machine is several feet away from the monitor, so I'd like to use the ones on the monitor. (Obviously it gives a power-error message when plugged into the keyboard, which is normal).
    Thanks

    Seems like it is a USB 2.0 or not problem
    10:38 PM Saturday; August 23, 2008

  • Iphone 5 not working when plugged into widows

    i have an iphone 5 around 6 months now, it charges perfectly and when i plug it into my laptop it does not show up at all, at the start this was not an issie and i now can now sync music or even charge it on the laptop. i have tried a different laptop and i different lead with no luck. the apple mobile device is intallef and both iphone and itunes are up to date in terms of upates. Ive tried alot f things at this stage and i looked at the thing on the itunes support on this and tried the things it said, again the phone is not even charging on the laptop, i have a windows 7 laptop and iphone 5.. any halp is great thanks

    With the device not connected to the computer, remove and reinstall iTunes, following the instructions in this support document http://support.apple.com/kb/HT1923. Make sure you follow them in order, or it could lead to problems. After reinstalling, connect the phone. It should reinstall the drivers at that time.

  • IPod will not update when plugged into computer?

    Just recently my iPod with not update when I plug it into my computer. My iPod does not show up on my Mac or my iTunes. When I plug it in the screen shows the do not disconnect sign. I have tried to reset my iPod and checked for new updates, but they haven't worked. If anyone knows what to do that would be great.
    Thanks

    Yes. Since I installed the new system software (10.4.6) update Sunday night, I cannot update any of my iPods except the iPod video. The iPods also do not show up on my desktop. The battery charges but that's all that happens.

  • HT4623 My iPhone 4 will not charge when plugged into computer or outlet.

    All software is up to date and I have used two different USA cords and neither will charge my iPhone 4.

    Clean out the docking port of the phone.

  • IPod Touch not recognized by iTunes and not charging when plugged into computer

    I plugged in my iPod touch to my Mac computer. My iPod doesn't charge and iTunes isn't recognizing it. I have turned my iPod on/off, I have reset it, I have the newest version of iTunes, and I restarted my computer. Nothing has helped. What do I do?

    Did it sync to the computer before?
    What model iPod do you have and what iOS is installed?
    Your post states that your have OSX 10.4.11. If you updated the iOS on your iPod on another computer your computer may not recognize the iPod.  The newer iOS require 10.5.8 or higher.

  • I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I

    I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I have tried all suggestions in this thread and nothing works. I also hooked up to laptop through iTunes with micro USB nothing!!!

    The new appletv software came out 2 or 3 days ago, how would Apple get it on the device in the box in a store?
    Why don't ou update the appletv software?

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    Having same issue here:
    https://discussions.apple.com/message/19043181#19043181

  • My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

    My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

    Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
    See this Apple support Article
    http://www.apple.com/support/ipod/five_rs/classic/
    You did not by chance bought the Hello Kitty special edition?
    Have nice day!

  • I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong

    I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong?

    Each email account can have its own alert or notification settings.
    Settings > Notifications > Mail > tap on each account and set the alerts you want.

  • HT204302 my itunes does not recognize my iphone when plugged into computer it recognizes my iphone as still camera

    Help
    Itunes does not recognize my iphone when plugged into computer it recognizes it as a still camera. I have installed the lastest version of itunes and gone through the troubleshooting tips and still have the same problems.

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • My new iPad mini will not charge when plugged into adapter. Any suggestions?

    my new ipad mini will not charge when plugged into adapter. What should I try?

    Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    The problem would seem to be in the firewall in your router.  Have you tried disabling it? I assume you've updated the router firmware, right?  Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

Maybe you are looking for

  • Exchange Rate date for Invoice posting for Slovak Republic

    Hi, We have a requirement wherein for Slovak Republic, Invoice should pick up ( at the time of Invoice Posting) the exchange rate from the Delivery Note date and not the Invoice Posting Date. This is applicable for all vendors which have a Slovak Rep

  • Allocation Function in Integrated Planning

    Dear all, When reading the documentation on Integrated Planning ("New BI Capabilities..") I noticed the Allocate function is not mentioned. These functions are mentioned: Revaluation Reposting Formulas Currency translation Unit conversion Copy Distri

  • Cant Open Any Adobe File anymore

    None of my adobe files will open.  They just give some version of "cannot find  c:\program files (x86)\adobe\Reader 11.0\reader\acrord32.exe"  (example) I have AVG installed and I did also have Ad Aware and AVG PC Tune Up but those last to are histor

  • Exclude mlog$ table during import

    Hi Experts, Could you please help me on how to exclude the materialized view log tables (mlog$ table) during data pump import. Error: ORA-31693: Table data object "RM_DBA"."MLOG$_ACTUAL_INCOME" failed to load/unload and is being skipped due to error:

  • Arithmatic Equation - How to change decimal point ?

    Dear all, I am very new to LabView. I am currently using LabView 7.1 for my project. I am building a voltmeter reader. (attached is the vi file). The flow should be like, i am reading voltage from I/O card. Then, the voltage value (eq. 10 volt) is ch