HT1296 how to transfer Iphone 4 data to my Dell pc
how to transfer Iphone 4 data to a dell laptop ?
Read here:
http://www.apple.com/support/iphone/syncing/
Similar Messages
-
i am switching from iphone 3gs to iphone 4. can some one guide me how to transfer all my data to iphone 4?
i have a back up in my itunes account .can anyone suggest please ????http://support.apple.com/kb/ht2109
-
My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?
Use the backup you have of the old computer and restore that data to the new computer. Also and backups that you have made of your iTunes library (it has a method to back it up as well) can be copied back over to the new computer. If you attempt to sync the phone to the new computer without the data, it will delete that data from the phone. The iPhone is not designed as a storage/backup device and as such will not sync music from itself to a new computer.
If by chance you had not been backing up the computer and/or iTunes, you can google for some third party software, such as Touchcopy that will do some of what you are asking. -
(urgent)How to transfer(outbound) the data of invoices to flat file?
HI All,
i am new to oracle Receivables. i have assigned task like below. How to transfer Oracle Receivables data(open invoices) to flat file(format like Xl Sheet or csv).i mean to say that outbound interface with sample data and code. can some one help me to sort out this issue. pls send me sample code for invoices outbound.
Thanks.
Edited by: user627525 on Feb 18, 2009 9:30 PMHi, Here is what you required...Below logic shows how to use utl_file to write a data into file which is store outside of database. Please let me know in case of any additional information is required. Thanks!
V_Extract_Dir:=ltrim(rtrim('/cdunix/erp/'||V_Instance_ID||'/global/acctrecon/wrk'));
V_Rename_Dir:=ltrim(rtrim('/cdunix/erp/'||V_Instance_ID||'/global/acctrecon/snd'));
V_Fname := 'ASSURENET-GL-'||V_SOB_ID||'-'||V_Date||'-'||V_Fnum||'.csv';
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,V_Fname);
V_File:=UTL_FILE.FOPEN( V_Extract_Dir,V_Fname,'w');
FOR C3 IN C2 LOOP -- Header record
UTL_FILE.PUT_LINE(V_File,'"HEADER"'||','||C3.V_Con ||','||C3.V_Total);
END LOOP;
FOR C4 IN C1 LOOP -- Body
UTL_FILE.PUT_LINE(V_File,C4.md);
END LOOP;
FOR C3 IN C2 LOOP -- Footer Record
UTL_FILE.PUT_LINE(V_File,'"FOOTER"'||','||C3.V_Con ||','||C3.V_Total);
END LOOP;
Regards,
Murali -
How to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
how to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
Plz suggest me any BAPI or IDOC for that ..
thanks in Advance .You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right -
How to transfer internal table data to Applicatiion Server in XML fromat.
how to transfer internal table data to Applicatiion Server in XML fromat.
Hi if u want to transfer from to application server using xml in
do like this,
v_xml_table is u r internal table,
and define li_xml_table as line of u r internal table
OPEN DATASET g_file FOR OUTPUT IN BINARY MODE .
LOOP AT v_xml_table INTO li_xml_table.
TRANSFER li_xml_table TO g_file .
ENDLOOP.
CLOSE DATASET g_file.
ENDIF.
<removed_by_moderator>
Regards,
Prasad.
Edited by: Julius Bussche on Jul 16, 2008 2:43 PM -
?? Can you transfer iPhone 3GS data and apps to an iPhone 5S
?? Can you transfer iPhone 3GS data and apps to an iPhone 5S ??
Yep. Follow the directions here:
http://support.apple.com/kb/HT2109 -
Is it possible for me to transfer the backup data of my iPod touch and iPhone from my old computer to a new one? I don't own any Macs, only PCs. My backup data are saved on a PC (desktop) which has Windows XP SP2 as its OS and I am planning to transfer my iPod/iPhone backup data to a laptop with Windows 7 as its OS. Is it possible? If so, can someone tell me the step-by-step procedure on how to do this, including how to find the folder where my backup data is stored. I would be very much grateful. Thanks a lot for those who may be able to help me with this matter. ^_^
P.S. I am planning to use an external hard disk to transfer my backup data to the new computer.
Message was edited by: Angeal_Hewley03Ah, I see. In that case your life will be much easier if you convert your library back into a portable format before you attempt to migrate it.
The normal location for the iTunes Library.itl file is the iTunes folder at <User's Music>\iTunes though it is possible that you have previously moved the library separately from moving the media folder, or you could have your media stored outside the designated iTunes Media folder.
Here are the typical layouts for the iTunes folders:
In the layout above, with the media folder (everything in the red box) inside the library folder, the library is considered to be portable. You can rearrange things to make a split library portable by taking a number of small steps which don't break the library.
Before you start any media files that are outside of the designated media folder will need to be consolidated. N.b. Your iTunes Media folder location should be on the target drive that you are going to build the portable library on. If you have the bulk of your library is stored in a folder on an external drive that is not currently designated as the iTunes Media folder then change this property (Edit > Preferences > Advanced) before consolidating.
If the library is in the old style layout then it should ideally be be upgraded to iTunes Media Organisation (Library > Organise Library > Rearrange files in the folder <Media Folder>) to ensure that iPod Games, Mobile Applications etc. are brought inside the media folder.
The basic non-fatal manipulations are:
You can connect to an alternate set of library files by holding down Shift (Win) or Option (Mac) when starting iTunes.
You can move the library files to a new location as long as the media stays put.
You can move the library files and the media together if the media folder is a direct subfolder of the library folder.
If you have already moved/copied the media content from a subfolder of the library folder to a different location then you only need to copy the library files for it to appear as if you have moved the entire library in the way allowed above. I.e. just copy the library files into the parent folder of the media folder.
You can rename the media folder to iTunes Media (if it isn't already) if the media folder is inside the library folder.
iTunes uses the name of the folder holding the library files as the window title. Having made a library "portable" you may need to take a final step of renaming the library folder to iTunes or, if the library files have ended up at the root of a drive, moving all of the library files and content folders into a new folder called iTunes.
After each change you need to open, test and close the relevant library before attempting another change. If a change broke the library, undo it or revert to using the previous set of library files.
In essence all you need to do to make your library portable is copy the library files into the parent folder of the media folder on the external/secondary drive and use the hold-down-shift/option-when-starting-iTunes method to connect to it. Other manipulations may be required to normalize the library so that the library and media folders have standard names.
tt2 -
HT1296 how to transfer my iphone contacts to outlook
how to transfer my iphone contacts to outlook?
Here is the way about how to transfer contacts from iPhone to Outlook:
Step 1: Connect the iPhone to the computer using the supplied USB cable and launch the iTunes application. iTunes displays your iPhone on the left panel under "Devices".
Step 2: Click your iPhone on the iTunes panel and click the "Info" tab. Click "Sync contacts with" and select "Outlook."
Step 3: Select "All Contacts" if you want to sync all the contacts from your iPhone to Outlook. If you want to select specific contacts, click "Selected groups" and place a check on the contacts you want to sync to Outlook.
Step 4: Click "Apply" to sync your iPhone contacts to Outlook. Click the "Eject" button on the right panel and disconnect your phone from the computer. Close iTunes.
Step 5: Launch Outlook and click the "Contacts" tab. You should see the imported iPhone contacts. -
How to transfer iphone content to new Macbook
I've just replaced my PC laptop with a Macbook and I'd like to know how to transfer my iphone content to the Macbook. I've read various help pages and posts and I'm totally confused about the conflicting information.
I understand that the iphone is designed to be used with only one computer, but getting it to the new computer is the challenge. I have thousands of songs, hundreds of photos, 150+ contacts and 13 apps (some of which I rely on heavily). As well as notes which I was never able to synchronise previously, so they only exist on the iphone.
Most of the songs were loaded from my CD collection and it took weeks to rate and categorise them, which I would prefer to avoid doing again. I suppose I could export as data CDs but it's still a lot of disks and time. Most of the photos were taken by camera (not iphone) which again I could transfer via data CD.
If I've understood things correctly, the authorise/deauthorise option in iTunes refers to items purchased via itunes only? And the iphone backup only backs up settings, rather than content? Would an external hard drive help (I don't yet have one)?? I'd appreciate your thoughts for a simple-ish, not to time consuming solution.
Thanks in advance,
AlisonBy design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you replaced your computer, your phone, sees your computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in itunes(under the edit menu if using Windows).
2. Make sure you have one contact & one event in the supported applications(Address Book & iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go. -
How to transfer iphone files to icloud?
how do i transfer files,apps/photos from my iphone to icloud? i bought addtl icloud storage but im not sure how to transfer my iphone files to icloud.. is there a way to do that using iphone only without using laptop? thanks
Hi gd4lyf,
You can setup which items you want stored in iCloud with the iCloud Settings.
iCloud - iPhone
Thank you for visiting Apple Support Communities.
Nubz -
How to Transfer apple mail data to windows outlook 2013
Looking for a solution that will help me transfer all my data, from emails to address book and contacts from apple mail to outlook 2013 in windows system.
I have gone through Imap way of email, but there are some few thousand emails stored as archive and are not available on server. And via Imap I cannot export my contacts and address book. So how can I transfer all the data from mac to windows outlook 2013.
Please help.If both system are using the IMAP mail provider all you have to do is setup the connection to the mail server and all the emails and folders will be copied down to the windows computer. That is what IMAP is for. The mail stays on the server, and can be store on the local computer also, and when you connect to the server with another device, computer, phone or pad, all the mail with folders gets copied to the other device.
But I think some of your mail was gotten using POP so it is not longer on the server.
Or you have emails in local folder only and they would be on the server. But you can create folder on the server in one mail program, or on the mail web interface and then copy those emails into those folder on the server byt copying them in one of the email programs. Then when you log on with the other device all of them will be downloaded to the other device.
Other alternative:-
You can find various solutions on having a google search for your problem.
Or you can have a look at the following link: Apple mail to Outlook Windows
Hope this will help.
Thank you -
HT1296 how to transfer photo , music and video from ipad
how to transfer photo , music and video from ipad
Sync with itunes on the usual computer you use for syncing.
For photos and video...
http://support.apple.com/kb/HT4083 -
How to transfer the transactional dat a using ale
hi to all abap gurus
i heard that we can transfer the transactional data ( like so data , po data ) using message control technique by ale technology . . can u please give all steps in message control technique with one exapmle . i searched in the forum but i did not get answer . pls points will be rewrared for good answers. if u want to give links pls give exact links .Hi ,
here is the configuration.
MESSAGE CONTROL (USING EDI / ALE)
For Purchase order (Message control using EDI and message type ORDERS) STEPS
Settings to be done in the Sending system
From NACE
Choose Application EF ( Purchase order), press on condition record
Output type NEU Purchase order / double click ;choose Purchasing output determination:Doc type/purc org/vendor . Key in the data (Purchasing doc type NB, Purc organisation 0001, Venor vendor11) execute. Key in the data (vendor vendor11, name name1, partner function - VN, Partner Vendor11,Medium 6 (EDI), time 4(send immediately), language EN).
Press on output types , choose NEU Purchase order, double click, Access sequence 0001(doctype/purcorg/vendor) tick mark the access to condition, go to default values (dispatch time send immediately, Transmission medium EDI, Partner function VN)
Create RFC destination from SM59 (ZNARA_ALE_EDI).
Create a port from ZNARA_ALE.
Create partner profile vendor11 under LI and not LS. PARTNER NUMBER SHOULD BE SAME AS THAT OF VENDOR SET IN THE CONDITION TYPE.
In the outbond parameters of the partner profile Vendor11 key in the data (Reciever port -> ZNARA_ALE,
Basic type ORDERS05, Message type ORDERS ) Go to the message control and key in the data (Application EF, Message type NEU, Process code ME10, Transfer immediately )
Create a purchase order from ME21 with data (Purchasing doc type NB, Purc organisation 0001, Venor vendor11). System will generate an outbond Idoc automatically which can be seen from WE02.
For Purchase order (Message control using ALE and Message type ORDERS) - STEPS
To transfer the idoc from Client 555 to 500
Settings do be done in 555.
From NACE
Choose Application EF Purchase order, press on condition record
Output type NEU Purchase order / double click ;choose Purchasing output determination:Doc type/purc org/vendor . Key in the data (Purchasing doc type NB, Purc organisation 0001, Venor vendor11) execute. Key in the data (vendor vendor11, name name1, partner function - VN, Partner Vendor11,Medium A (ALE), time 4(send immediately), language EN).
Press on output types , choose NEU Purchase order, double click, Access sequence 0001(doctype/purcorg/vendor) tick mark the access to condition, go to default values (dispatch time send immediately, Transmission medium ALE, Partner function VN)
From SALE create two logical systems and assign them to the respective clients (ZALERECV_N 500, ZALESEND_N 555).
From SM59 create RFC destination with the same name as that of the receiving logical system (ZALERECV_N).
From BD 64(distribution model), create a model view with Technical name ZNARA_PO (message type ORDERS, Sender ZALESEND_N, Receiver ZALERECV_N). Generate partner profiles. Distribute.
Note that partner profile will be generated under LS.
Settings do be done in 500.
From NACE create two logical systems and assign them to the respective clients (ZALERECV_N 500, ZALESEND_N 555).
From BD 64(distribution model), keep the cursor on Technical name ZNARA_PO. Generate partner profiles. Note that partner profile will be generated under LS. Change the process code to ORDE in the inbond parameters .
Now in client 555, Create a purchase order from ME21 with data (Purchasing doc type NB, Purc organisation 0001, Venor vendor11). System will generate an outbond Idoc automatically which can be seen from WE02. The purchase order details will be updated in 555 thru the inbond idoc.
IMP data for message control in Sales order creation.
Partner profile to be created under KU.
Outbond parameters in the partner profile (Message type ORDRSP, Basic type ORDERS02, partner profile - SP) In Message control (Application V1, Message type BA00, Process code SD10)
Notes:
Check the entries in the NAST table to see whether outbond idoc has been created successfully or not
If you have choosen collect idocs in the partner profile, use trans code BD87 to process them
Table EDP13 - Partner Profile: Outbound (technical parameters)
Table EDP21 - Partner Profile: Inbond (technical parameters)
Please reward if useful. -
HT1296 How to transfer photos from windows XP to IPad2
Want to know how to transfer photos from windows xp to IPad2
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom
Maybe you are looking for
-
The ethernet port on the thunderbolt display is not working
The ethernet is working when the cable is connected directly to my mac laptop but when connected the thunderbolt display there is no connection. Is there some type of set up for the ethernet connection or can this port just be broken? Thanks for th
-
Issues with images in Portfolio (Acrobat X Pro)
Hi all, I am having an issue with my portfolio file in Acrobat X Pro. I insert images from my hard drive, then proceed to give them display names and tags. This works fine, but then the next time I open the file, some of the pictures have become brok
-
In iphoto how to get the gold you delete a photo warning message when you check the box not ask
in iphoto how to get the gold you delete a photo warning message when you check the box not ask
-
Required Config and testing Docs for cash management/cash forecasting
Hi All, My client need to implement cash management/cash forecasting .. Can anyone send the details Required Config and testing Docs for the same as earlier i have not worked in this area.. Thanks in advance... Regards, Sandip
-
Can anyone let me know how to integrate crystal reports with bi 7?
HI all, Can anyone pls let me know the steps involved in integrating crystal reports with bi 7? thanks Pooja