HT1296 I am needing help to figure out how to update my itunes
I need help. I have itunes on my computer and I have always been able to sync it with my phone and now it says I need to do an update on my itunes but not sure how... Please help
You can run Apple Software Update, or you can download the iTunes installer from the iTunes tab above and run that installer.
Regards.
Similar Messages
-
Can someone please just help me figure out how to update this stupid phone(iPhone 4)without losing anything? I somehow have more than one Apple ID on this,but I just want my music and my pictures to stay and I'm terrified of losing these things. I have a lot of music from old CDs on here,and for some reason I can't even transfer them manually onto my computer. I'm not tech savvy whatsoever. Someone please help,having my music is the the whole reason I still have this phone.
First read about back http://support.apple.com/kb/ht1766
Then read on how to transfer photos to your computer http://support.apple.com/kb/ts3195
Then
UPDATING iOS
Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
The following link explains how to update http://support.apple.com/kb/HT4972
This link explains how to update using wireless http://support.apple.com/kb/HT4623
This explains how to transfer purchases to your computer http://support.apple.com/kb/ht1848 -
I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?
Hi , a similar thing happened to me with another piece of software .. it was then that I realized I have two accounts .. I have no recollection of setting up two but it seems I did somewhere along the line.. I have jimkells and the second is [email protected] .. so when I logged in as the other acc there it was and I was able to update .. could it be FCPX was bought on another user account ??
Jim -
Need help in figuring out how to set up an IMAP Yahoo account
Hello,
I am trying to help my dad (who is 80 years old) in setting up his iMac and iPhone 4S with his email. His email address ends in "sbcglobal.net", however, he is able to check his sbcglobal email through Safari by going to Yahoo Mail. I don't know how or why this works, but it does--I've seen him do it many times. Even though he is logged into Yahoo mail, he is receiving his sbcglobal mail. And when he sends email through Yahoo Mail, it shows as coming from his sbcglobal account. I'm assuming that somewhere along the way, Yahoo bought sbcblobal or vice-versa.
My dad went to the Apple Store because he would like his email to be "sync'd" with his iPhone 4S. The only way to do this is to have an IMAP email account. His sbcblobal account is POP---not IMAP. However, the Apple employee he talked to (during a One-to-One training session) printed out a thing for him that shows him how to "add" an email account to his "Mail" application on his iMac. I've seen the printout, and it's just the usual manner where you go to Accounts and then click the "+" button to add an account. But I don't understand why this would accomplish anything, because he already has his sbcblobal email account set up in "Accounts"----why should he do it all over again with the exact same information? The Apple employee told him that if he adds the account, it will show up as a Yahoo IMAP account, but this makes no sense to me at all.
So I'm trying to figure out how to help him, and I'm trying to understand what the Apple employee was asking him to do by "adding" another Account to Mail. He already has his sbcglobal account in Mail, but the employee told him that it would show up as Yahoo IMAP? I'm VERY confused.
Attached is a picture of what the Apple employee told my dad to do. How did she get "Anthony" as an IMAP account?
Thanks much!however, he is able to check his sbcglobal email through Safari by going to Yahoo Mail.
Almost evert Mail Provider also has a WebMail interface you can get to in browser.
THe reason to set up a new one is safty, though it's possible to change the existing one, best to set up a new one first, then move any eMails he wants to keep to the IMAP account.
Yahoo Plus IMAP Settings for Mac OS X Mail
http://hints.macworld.com/article.php?story=20110208153256491 -
Wish I didn't upgrade! and now I need help to figure out how to make it wor
I have a Windows XP Pro 2nd edition with IE ver 6.0.2 (but I normally use FireFox)
I've never had any trouble with iTunes until iTunes "forced" me to upgrade my iTunes applicaiton to version 6 if I wanted to "purchase" music. (note to self: Purchase music from stores it's much safer)...
I upgraded and received no error messages. Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
I have uninstalled and installed 5 different times and ways.
First uninstall was "typical" uninstall. THat didn't fix it.
Second uninstall was "typical" unistall from the Control Panel, and then I removed the folders from the "program File" folder. Still wouldn't work.
Third unintall was "typical" then I removed folders from local drive and removed all "known" registry "itune" keys. That didn't work.
Fourth uninstall was first a "repair" to itunes, and then a "typical" uninstall, then I removed folders, removed registry (does anyone know all of itunes registry keys? Maybe I am missing a few.. the only ones I know of is the "itune" reg). Then I looked through my start up menu from "msconfig" and took a look at my firewall program to see if there was anything preventing the program from running...
Fifth uninstall pretty much fruitless as my previous attempts.
I know it HAS to be a registry key of some sort.. here's why:
When I uninstall and reinstall (no matter how thourough) every time I install the iTunes program Windows XP has never ONCE recognized the new install of iTunes as a "NEW PROGRAM" and it should!
I need help... what registry keys should I be removing? ANyone suggest for me to remove Quick Time too? What about the ipod updater software? Any connection?
HELP??????????????????
THanks
W.hi wmchisholm!
Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
hmmm. is itunes.exe persisting in Task Manager? if so, first check up on these two possibilities:
iTunes 6 won't open on a Windows computer if firewall software is not up-to-date
iTunes for Windows doesn't open after upgrading
but if itunes.exe is disappearing after a few seconds, try the following technique:
Using MSCONFIG to troubleshoot conflicts in Windows
... and let us know the names (exact spelling please) of the start-up items that you had to disable in order to get itunes to launch. (there's a nasty piece of malware out there that has been causing "error-less" itunes launch failures since late October.)
love, b -
Beginner! I need help on figuring out how to make a form display subforms/fields based on a drop do
I am trying to create a from that will allow the user to select a 1st, 2nd, or 3rd request. All of the request will need to be a little different so I would like to make the subform or feild that are relavant to the request type appear and the other be hidden. Should I use subforms to accomplish this or ????? I have looked all over for a answer but I can't find anything that seems to work for my needs. Can someone please help?
Thank YouThank You for the response! I was able to get that far but I am still having trouble. First, I was able to get the form to work even though I used postioned content. I used 3 radio buttons and JS to get the subforms to appear and disappear. (Request1.presence ="visible"; Request2.presence ="hidden"; Request3 ="hidden" each button has a similar script on the Click event) The problem occurs when you go from the 3rd button to the 1st button. Both subforms show up but if you go in any other order the subforms hide and appear properly. ??????? Maybe I am going about this completely the wrong way.
-
Need Help, Cannot figure out how to set up a network password
Also, i can connect to the internet, but the light in the base is always flashing amber
Hello, cb1981. Welcome to the Apple Support Discussion Forums!
Let me be sure I understand correctly:
1. You have an AirPort Extreme that is flashing amber.
2. You are able to access it via AirPort Utility.
3. You are having trouble setting a password for the wireless network.
Is all of that correct? -
I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.
Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there. -
Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get my purchased music back onto my ipod?
Hi kimcinma!
Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
Sandygirl -
Can someone please help me figure out how to "clear" recent email addresses used in Mail?
Can someone please help me figure out how to “clear” recent email addresses used in Mail? For example, as I begin typing a name/email address in the “To:” field, Mail begins suggesting addresses that I’ve previously used. I don’t want any suggestions unless they are in my contacts.
Another example: When using MS Outlook, it will also remember and suggest email accounts previously used, but I can arrow down and delete an account from the list so it won’t automatically popup or suggest in the future.
I appreciate any guidance in this matter.The iOS email app stores all email recipients in a list of previous recipients which cannot be turned off. The email address autofill feature when addressing an email pulls from contacts and from the list of previous recipients which can't be prevented. There is no option to clear the list of previous recipients - not at the present time anyway.
If you don't want any suggestions, select from contacts instead when addressing an email. -
Can anyone help me sync calendars from my iPhone to my Mac and help me figure out how to edit or delete lists in Reminders? I thought upgrading to Mountain Lion would work, but I'm having the same problem as before under Snow Leopard. So, here's my situation.
I'm running 10.8.2 on a Macbook Pro. I have a 3GS iPhone running 6.0.1. I can make entries on my Mac Calendar and they will show up on my iPhone, but if I make an entry on my iPhone, it never makes it to my Mac. Also, I notice that when I log in to my iCloud account on my Mac, it has a "me.com" email address as my apple i.d., but it is not my primary account i.d. and I can't figure out how to delete it. Also, my Reminders application won't allow me to delete lists I created. Contacts, on the other hand, work instantaneously regardless of where the change is initiated.On you iPhone check Settings>Mail,Contacts,Calendars>Default Calendar (in the calendars section). Here be sure you have selected the Calendar listed under your iCloud account ID as your default. If you haven't, make this change, then enter a new event on your phone and see if it syncs properly now.
You should be able to delete you reminders list by, from the Lists view, tapping Edit at the top, then tapping next to the list you want to delete and tapping Delete. -
Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!
I'll stay in this chat ... I answered in the other one ... I have a Sony digital Handycam ... from years ago. I just got the LaCie and I think I formatted it for only to be used on my Mac ... how should I go about reformatting it to be HFS Extended like you said?
-
Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.
Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh -
I made a website, but have now deleted it in order to take it down. However, after deleting it, the website is still online? Can anyone help me figure out how to remove the site completely?
The site is joehewett.uk and I am worried that now I do not have the files of the website I cannot remove it?
James.Did you delete the files from your Remote server?
Deleting the local site folder or the site definition in DW will have no effect on your remote site.
When I go to your URL, I see the index.html page with 16 code errors and this background image:
http://joehewett.uk/Untitled-1.jpg
So the site is still online until you delete those files from your server.
Nancy O. -
Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?
Use markers on every beat.
The edit the zoom/scale to the markers.
Adobe Premiere Pro Help | Working with markers
Maybe you are looking for
-
So frustrating!!! Nothing will play since the update. I've also tried to import CD's and I can't tell if that even worked. I'm not happy with this update!!
-
Export Markers w/ SMPTE Timecode (subtitling-related)
I am about to scream with frustration. I have a nice, long sequence on the timeline that needs to be subtitled. I've spent the last two days setting markers, extending them until the speaker's finished speaking, and transcribed what they said into th
-
Hi all, We are in ECC 6.0. When we reverse the cheque through Off-cycle, the process working ok but at the end it is not balancing. There should be two entries one is new cheque no in one column and the other entry in the reverse cheque no in the ot
-
Adding custom fields in IW41/42/43.
Hi All, I have a requirement of adding custom fields in the order confiramtion screen i.e IW41/42/43. i found this user exit CMFU0001: Determine customer-specific screen layout. but i am not able to figure out a way to use it. has anyone done such an
-
Consuming Web Service from ABAP: ERROR_WEBSERVICE_RUNTIME_INIT
Hi fellows, I have to make a call from SAP (CRM) to external system (via webservice) for this purpose I've setup a new Proxy-Object, uploaded the WSDL file (locally) and Created a Logical port. In the Logical Port under the tab Call Parameter I've de