HT1296 I used sync to get notes from my i-pad to my computer. It apparently went to my windows 2007 but where do I find the notes on my computer?
I used sync to get notes from my i-pad to my computer. It apparently went to my windows 2007 but where do I find the notes on my computer?
Thank you.
Your answer led me to the notes I was seeking.
When I looked at the bottom of the left side in outlook I did not see any icon but I saw a little arrow.
When I clicked on that it I was able to specifiy that I wanted an icon for notes.
When I added the icon, I was able to click on the icon and find my notes.
Similar Messages
-
I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?
If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD
-
Where do I find the NOTES on my laptop after syncing iPhone?
I have downloaded the latest software on my MacBook and my iPhone. However, after syncing, I cannot find the NOTES from my iPhone anywhere on my MacBook. Where do I find them? TIA
KaydeeceeWhen you open Mail on your Macbook, look under "Reminders" in the left sidebar.
-
Where do I find the notes that were supposed to be synched on the computer
I just did a restore and my notes did not sync...the notes from the iPad were moved to the iphone...they must be hidden somewhere on the computer hard drive....anyone know how to find them?
Notes is included on the back up w/c you cannot view directly to your computer because it is an encrypted file and if you're using Windows you may use Windows Outlook to view those notes or if Mac it will be synced on your Mail app as long as you're using the Mail app on your Mac.
-
I need to authorize my laptop with the itunes store in order to sync it with my ipad but when I go into the store I cannot find where to do the authorization?
johnbescoby wrote:
Hi Roger, Many thanks I found the authorization section activated it and it was confirmed by itunes. But then I encountered another problem as attempting to sync my computer to my ipad i still received the same notification that it was not authorized so I really would not know how to rectify that so any assistance would be appreciated,
Thanks John
I was under the impression that once you had authorised the computer, transferring purchased and other songs to your iPod/iPad wasa then straightforward. However it gets more complicated with apps, and as I don't have an iOS device I can't advise. You've actually asked in the forum for questions about these forums, and you would do better to ask in the iPad forum, where people who actually have these toys hang out. -
Where can i find the 'notes' icon on my iMac?
Bought an iMac a couple of years ago and only just realised the 'Notes' icon is not in the Applications so I can't sync notes with m iPhone or iPad. Can anyone help with this?
Notes isn't available in Mac OS X versions prior to 10.8. Back up your data and download Mavericks from the Mac App Store.
(101314) -
My apple TV was working great. Did everything in manual.
in settings, do not see my appletv.
How do I add to system. How do I find IP address
restarted per manual, had appletv box checked at apple store, worked fine. Bought new apple HDMI cable
Getting light to blink but no service when i use remote. worked last nightThe option to look for Apple TV's in the preferences went a while ago.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted. -
How do I switch from one column to the next, skip around? Tab key doesn't seem to do itl. I can't find any "help" in "help". Help. Please. Thank you.
Hi Karen,
It is simple.
Columns fill with text as the text becomes enough to spill over from the previous column. Below is an example. I have used a huge (6" botom margin setting to shorten the page to a reasonable length for a screen shot, and turned on Show layout and Show invisibles so the column boundaries and invisible characters can be seen. Here there's no text in column 3 as there is only enough text to fill column 1 and part of column 2.
As more text is added, it eventually fills column 2 and flows into column 3:
You can force the text into the next column by inserting a column break. Here, a column break has repalced the paragraph break in column 2 (after 'fascilisi."):
Regards,
Barry -
I have a Mac Book and just purchased Dragaon Dictate. I need to download Bonjour to allow the microphone to work. But where do I find the application to download Bonjour?
Sue321,
It's a waste of a very expensive Mac to use it as a simple Netflix/TV streamer when less expensive and more capable devices exist. The Mac will get dirty from being exposed, overheat and just be a pain hooking cables whenever you want to watch TV and trying to fiddle with a remote.
A better low cost option is to get either a $60 Roku or a AppleTV, or if you want to play BlueRay and regular movie DVD's and have a few video games around for the kids, then a Playstation. Buy a HDMI cable online, they are only about $10.
All three options have a remote control, and every thing is designed to work on the screen, no need for the computer.
With the Mac, your going to have problems with copy protection, sound and other accessibility problems as computers are not really designed to be used as entertainment devices, or to power a big screen, but rather versatile tools, and along with that versatility comes some sacrifice.
You can use the same Netflix account for both the Mac AND the Roku etc., at the same time, in fact both are very much integrated, watch one show on the Mac while having another on the TV.
Also if you so happen to burn out or have a electrical accident with the less expensive device, it's only $60, instead of a few thousand $$ with the Mac. Not to mention once you set it up, the Roku, AppleTV etc is pretty much done, sits there ready to be used as intended for anyone to use who can push a button. -
Where can i find the sent emails from iphoto?
Sending emails from iphoto works.
But where can i find the history of my sent emails from iphoto. I can´t find it in mail.
Thanks for help!iPhoto and Mail are two entirely separate apps, so Mail keeps no record of what iPhoto does and vice versa.
iPhoto's mail feature is aimed at folks who use web mail generally, and who wanted templates. It's a handy way to send photos to Grandma, it's not an email client. It doesn't have a history or sent mail box.
Workarounds:
You can set iPhoto to bcc yourself automatically
or
Use Mail. It has templates too, and more of them. -
Where can I find the note 977156? Thanks!
go to service.sap.com\notes..you need service userid..your client should have one ..
FYI ..copying the same.
Summary
Symptom
You are unable to physically delete data from PSA tables.
Even though the system reports error message RSM1 622 " Request & successfully deleted from the PSA" after you delete data from the PSA tables, all requests still exist when you subsequently check the tables.
Other terms
RSA1
Reason and Prerequisites
This problem is caused by a program error in RSDU_PSA_DELETE_ADA.
Solution
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Support Package 10 or SAPKW70010) into your BI system. The Support Package is available once Note 0914304 with the short text "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can use the correction instructions.
However, you must ensure that Notes 932065 and 948389 are implemented beforehand, as otherwise an attempt to deimplement this or another note may cause major problems with SNOTE.
The above notes may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "preliminary version".
Before implementing an advance correction (if one is available and required), refer to Note 875986. It contains notes relating to the SAP Note Assistant and tips on how to avoid problems when implementing notes.
Header Data
Release Status: Released for Customer
Released on: 17.11.2006 06:48:37
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-SYS-DB-SDB BW SAP DB
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 70 700 700
Highest Implemented Support Package
Support
Packages Release Package
Name
SAP_BW 700 SAPKW70010
Related Notes
983618 -
Message was edited by:
Manga -
I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.
Downgrading the iOS is not supported by Apple.Have yo tried:
- Backing up and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
- Go to the OverDrive support site -
Trying to use FTP to get data from a different server
Hi Friends,
I have to use FTP to get data from a different server and upload it on SAP server. Now my problem is when I m trying to do ftp through command line it brings the file but with no data.
Through ABAP program nothing is happening.
Here's my code--
V_PASSWORD = 'test@123'.
V_PWD_LEN = STRLEN( V_PASSWORD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = V_PASSWORD
SOURCELEN = V_PWD_LEN
KEY = CS_KEY_500098
IMPORTING
DESTINATION = V_PASSWORD.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'test'
PASSWORD = V_PASSWORD
HOST = '176.0.1.6'
RFC_DESTINATION = 'SAPFTPA'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
cmd = 'lcd d:\ftp'. .
PERFORM FTP_COMMAND USING CMD.
CMD = 'asc'.
PERFORM FTP_COMMAND USING CMD.
CONCATENATE 'dir' 'ftpt*' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'ls'.
concatenate 'ls' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'mget trial.txt'.
CONCATENATE 'mget' 'trial.txt' INTO CMD SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = CMD
TABLES
DATA = MTAB_DATA1
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA1.
WRITE: / MTAB_DATA1.
ENDLOOP.
ELSE.
CONCATENATE 'Error in FTP Command while executing' CMD INTO ERROR SEPARATED BY SPACE.
WRITE: / ERROR.
ENDIF.Hi
try this.....in one of my reqt, i done this successfully....
FORM FTPCON.
FTP-------------------------------------------------------*
CLEAR DSTLEN.
SET EXTENDED CHECK OFF.
DSTLEN = STRLEN( S_PWD ). -
> (S_PWD (password) is a selection screen field )
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = S_PWD
SOURCELEN = DSTLEN
KEY = KEY
IMPORTING
DESTINATION = S_PWD.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = P_USER -
> Username
PASSWORD = S_PWD -
> password
HOST = P_HOST -
> Host
RFC_DESTINATION = P_DEST -
> Destination
IMPORTING
HANDLE = HDL
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = HDL
COMMAND = 'set passive on'
TABLES
DATA = RESULT
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = HDL
FNAME = G_FCNAME
CHARACTER_MODE = 'X'
TABLES
TEXT = T_FILE1
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = HDL
FNAME = G_FCNAME1
CHARACTER_MODE = 'X'
TABLES
TEXT = T_FILE2
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
DESTINATION = P_DEST
EXCEPTIONS
DESTINATION_NOT_OPEN = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " FTPCON
Hope it helps..... -
I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars. I downloaded it for the first time a month ago and had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error. What do I do now? Can anyone help with this?
Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M. -
There used to be a preview window in mail where you could read the message in the mail box but now its gone. It just shows me who its from and the date. I now have to click on the message twice to get it to display. How do I get the preview box back?
There is a bug in Mail triggered by receiving a password-protected PDF as an attachment. According to reports, the bug is fixed in OS X 10.8.5.
Maybe you are looking for
-
Unable to open AirPort options sheet in Network System Preference
Hi there, There are several posts (and a Radar bug number, 4273111) reporting a certain difficulty with systems that have been upgraded to Tiger. For some reason: When viewing the AirPort network interface in the Network system preference, certain in
-
What's the difference between "My Contacts" and "All Contacts"?
What's the difference between "My Contacts" and "All Contacts"? I have no other account other then my iCloud account (from what I can tell), but "My Contacts" has a significantly smaller number of contacts then "All Contacts". What's the difference?
-
Dear SDN, We had a requirement to activate the 'Get Support' Functionality for password reset. We have set parameters in System Configuration -> UME Configuration. When we click on the 'Get Support' link, we do get the page which asks for the user cr
-
Why won't my LR 5.5 import any images from my cf cards or external drive
Hi. My Lightroom was working just fine until yesterday, no problem importing anything and now nothing. I have tried importing my raw images from my cf card and I get "following images could not be imported because they could not be read" (97). I c
-
What needs to be done to avoid the vulnerability discovered according to hacking story yesterday?
what needs to be done to avoid the vulnerability discovered according to hacking story yesterday?