HT1296 itunes is not reading my device
I've recently updated itunes and plugged in my 3gs device and itunes is not reading my device for syncing, backup, and updating
Same here. iTunes isn't reading my iPhone, so all the helps here don't apply because I can't access my iPhone through iTunes! I'm so frustrated right now.
Similar Messages
-
Trying to update to IOS 5 but having problems - the iphone now wants to connect to itunes (picture on screen) and when connected to laptop via usb iphone not recognised (ie might as well be unconnected!) - help! If I reset the iphoneit comes back to the picture screen requesting connection to Itunes!
adamea5 wrote:
I'm assuming since my internet is down itunes loaded on the desktop will not recognize the device even though the phone is connected through a USB.
That is an incorrect assumption.
Device not detected in iTunes -
Itunes will not read my device
every time i plug in my device it makes a double noise. unlike the noise its supposed to make. i reset my phone numerous times and came out with the same result. i dont know what else to do. HELP PLEASE
Hello aamorio1979,
Thanks for the question, and great troubleshooting so far. There are a few more things you can check, including the Apple Mobile Device Support, and USB Driver:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
The screen shows the usb cable pointing to the iTunes ico. I've tried resetting the device by using the home and lock buttons, but the same screen shows up. Just redownloaded iTunes, but I can't get it to see the device.
Did you try to connect in recovery mode, explained in this article? iOS: Unable to update or restore
-
just wondering why you can browse, buy on itunes but not read on an imac. My kindle apps work on the imac, ipod, asus netbook, iphone and android devices. Why not ibooks on imac?
"just wondering why you can browse, buy on itunes but not read on an imac. "
Because Apple does not make an ibook reader for computers. -
my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
Help required please. "Itunes can not read the contents of my iphone"
Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description: PC
IP Address: (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers: 10.143.147.147
10.143.147.148
Adapter Name: {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description: Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name: {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description: Broadcom 43225 802.11b/g/n
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection: PC
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number: 85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again -
I have forgotten my passcode for ipad and itunes is asking passcode to be entered - even after following directions for computers not synced... multiple times, but iTunes is not "detecting a device in recovery mode." What do I do now?
DFU Restore
This will very likley result in loss of data.
Plug the iPhone into the computer.
Ensure that it is running the latest version of iTunes and that it has access to the internet.
Press and hold both the home and sleep/wake buttons for exactly eight seconds.
Release only the sleep/wake button but continue to hold the home button for another five seconds.
Let go of the home button, then look at the computer screen for an instructional popup.
The popup should say "iTunes has detected a device in recovery mode. . .(etc)" Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
If no popup appears, repeat the above DFU instructions. If you've never done a DFU, it may take about three attempts to get the timing right. -
itunes will not recognise my device iphone 5s, pls can some one help???
Hello Tantoh,
Welcome to the Apple Support Communities!
I understand that your iPhone is not being recognized by iTunes when you connect it. To help resolve this situation, please read over and work through the steps outlined in the attached article.
If you don't see your connected device in iTunes for Mac - Apple Support
Have a great day,
Joe -
itunes can not read the contents of the iphones "iphone 5s" go to summary tab in iphone preferences... . "what is this means?" "what i do????"
Hello there, Choochg.
The following Knowledge Base articles offer up some great steps for how to restore your iPhone:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
and
iCloud: Restore your iOS device from iCloud
https://support.apple.com/kb/ph12521
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I need to restore my ipod touch. I do not have access to my primary computer. I understand i will lose all saved data on my ipod touch. I have the latest vesion of itunes. I have a mac. Itunes does not recognize my device. What do i do?
Fix what?
You do not mention a problem. -
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?
So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store. -
after the update to IOS 5.1.1, my iphone is not being activated, it tells me ''your iphone could not be activated server is temporarily unavailable. . . .'', and itunes is not reading my iphone, itunes tells me that there is no sim card inserted, which is wrong, any solutions?
Does your computer recognize other iPhones?
If the problem is only with this iPhone, try following along with this Apple doc -> iOS: Unable to update or restore
If the computer doesn't recognize other iPhones, try following along with this Apple doc -> iOS: Device not recognized in iTunes for Windows -
Itunes does not recognized my device what will i do
itunes does not recognized my device what will i do
BigTarantula99 your link says:
If you have an iPod touch, see iOS: Device not recognized in iTunes for Windows. -
When I hooked up my new Ipod Nano, The message in I-Tunes reads, "An I-Pod has been detected but Itunes does not recognize the device" Any ideas to help?
Hi mulebacker,
Here is an article that provides troubleshooting steps for this message:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Cheers!
- Ari
Maybe you are looking for
-
How to trace the device who made purchase using my id? The
Someone close to me(i believe) has hacked my id and purchade hundreds of dollars at itunes. How can i trace the device itself? Is it possible that i can trace the device by referring to the purchase's reference number?
-
I have a computer workstation that consists of a GC760AV/GC459AV w/ an HP L1710 monitor. I teach language and I need to be able to record my students. My other, older computers have a mic built into the monitors. I can't record, so I started to look
-
Hello everyone, From the Adobe web site : "Volume management -New. Freely manage and organize your images across multiple drives, and continue to work with the high-resolution previews even when your originals are offline." I thought this mean I coul
-
I upgraded my iPad1 from ios 4.0 to 5.0 and I lost all my sent items
I upgraded my iPad 1 from ios 4.0 to 5.0, after that, the mails in the sent itms are missing. Inbox is fine. Can you please help me to get my mails in the sent items back? Thank you.
-
Calculation of bw statistics on query.
hai experts, creating the aggregate , due to query performance is low.please suggest me steps how to calculate the bw statistics on a query. thanks & regards karthik.M