HT1296 syncing iPad with iMac - syncing won't start

My iPad has always synced automatically with my iMac when I connected them. Today I get the message "could not be synced because sync session failed to start".
What di I do now?

Thank you so much. This worked immediately! Such a simple solution that it would not have dawned on me to try. Regards
Jerry

Similar Messages

  • I purchased Keynote for my iMac, when I sync my iPad with iMac isn't Keynote suppose to be installed on my iPad?

    I purchased Keynote for iMac, when I sync my iPad with iMac isn't Keynote suppose to be installed on my iPad too?

    I think that only files are synced, and not applications.
    On your iPad, go into app store and download keynote. 
    It is possible that you have to buy it again though, once for the desktop, once for ios devices. 
    please let me know if this helped. and if it's incorrect, so i can change it if so.
    Thanks,
    Finally iMac!

  • Itouch sync won't start

    Hi...I am trying to do a sync with my iTouch 4th generation (running 5.1.1), but am getting message that the "iTouch sync won't start".
    I've done some searches on this, but most just say to reboot or do a reset, which I have done, but with no success.  Anyone know other options on resolving this issue?
    Aggiebeach

    Was the error sync session failed to start? If so have you looked at these previous discussions:
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities
    iphone could not be synced sync session failed to start...: Apple Support Communities

  • My iMac G5 won't start up.

    My iMac G5 won't start up, and I don't know why. Before I had this problem, my iMac was working fine, but slower than my expectations. So, I decided to reinstall Mac OS with the erase and install option, and the installation went ok. When I turn on my iMac, I usually see a brief glimpse of a light gray screen, which changes to the white screen, and then shows the Apple logo and the spinning indicator. Now however, whenever I press the power button of my iMac, it doesn't get past the light gray screen. I hear a chime, and it changes to the light gray screen, but it never gets to the white screen with the Apple logo and the spinning indicator. If I leave the computer on at the gray screen, after a while, the fans start to spin at full speed. I didn't know what to do, so I tried to turn it on while pressing option. It kept searching for my operating system, but it never found anything, the watch indicator kept spinning and spinning and never stopped. So next, I tried to reinstall my operating system with the archive and install method. It worked, but after my computer went to sleep, it got frozen when I woke it up and the colored disk kept spinning at the password request screen (requests password when I inturrupt the screensaver or sleep).
    My questions are:
    1. What is the problem, and what can I do to solve it?
    2. Could my computer be affected with the problem at: http://www.apple.com/support/imac/repairextensionprogram/ (my serial number is in the range that Apple said that is effected)
    3. I have not reset the SMU. Should I try that?
    Thanks!

    Here's what I did. (bold text represents what the computer did after what I did)
    1) I opened the back cover.
    2) I plugged in the power cord.
    The first green light went ON
    3) I pushed the top internal button (internal power button).
    Lights 2 and 3 went ON.
    4) Even though the lights went on, which means that everything is fine, I still pressed the bottom internal button (reset SMU)
    The computer stopped everything. Fans stopped, the computer turned off, etc.
    5) I don't know if I did it right, so I put the back cover back on my iMac, and pressed the external Power Button.
    The computer still has the same problem.
    What should I do? First call Apple Care and then take my Mac to the Apple Store to repair?
    Thanks again!

  • IMac just won't start up!

    I'm running out of ideas here, fellas.
    My first-generation iMac G5 won't start up. I turn it on and it only goes up to the screen with the gray Apple logo. It never gets to the point of the spinning gear. After a while, the fan makes a constant loud sound.
    I have read similar posts but I have a more complicated situation: even before this start-up problem, my iMac's internal optical drive had died out, so I've been using an external one.
    So far I've done the following (with peripherals removed):
    Reset PRAM
    Reset SMU
    I've also tried doing the following with the external drive:
    Hardware Test
    Run Mac OS X Install CD (Both original and Tiger)
    Nothing going, and my warranty's out.
    Help?

    Might be worth trying a new PRAM battery, alternativeman. It is a CR2032 lithum button battery - used in many calculators, remote controls, etc etc and available from any electronics part store (and many other places too) for a couple of dollars (or from an Apple dealer for about $50).
    Very easy to replace on this model. See http://manuals.info.apple.com/en/imacG5allModelsBackupBattery.pdf
    Cheers
    Rod

  • Macbook pro blue screen with spinning disk, won't start up. desperate!!!

    macbook pro blue screen with spinning disk, won't start up. desperate!!!  i'm a student and have a paper due tomorrow.
    my macbook was really sluggish so i ran a hardware test. it said NO PROBLEMS. i did restart. my current login and password were REJECTED.
    then the macbook went into blue screen and it just sits there and flashes to gray and back to blue and the white lines that make up the circle icon just spin and spin. i am DESPERATE to get this running so i can print my paper. please email me directly to my cell phone because i can't access computer. using someone else's computer to request help. DIRECT EMAIL PLEASE   thank you.
    <Email Edited by Host>

    Hi ...
    my current login and password were REJECTED
    Try resetting your admin password >  Mac OS X: Changing or resetting an account password

  • Sync mail on iPad with iMac

    I have what I believe to be a simple question/request.  I would like to sync the mail messages (sent, received, folders) on my iPad2 to my iMac.  In other words, when I send a message on my iPad, it goes into my sent folder on the iPad.  When I sync my iPad with my iMac, I would like my iMac mail program to reflect all the activity from my iPad (messages sent and received).  I just got off the phone with an Apple support representative who told me that function does not presently exist.  That seems odd to me.  If my messages don't sync between devices such that the two devices do not include messages sent on either or both, that doesn't exactly seem to me like the two device sync at all.  Any help would be appreciated.  I'm currently using a sbcglobal.net account, which I believe is a POP3 account. 
    Thank you.

    You need to have an IMAP account.
    Pop accounts are not designed to work with multiple computer/devices.  IMAP account are designed for this very thing.

  • Syncing iPad with iMac

    I want to sync my ipad with my new  imac in order to copy all my carefuly comleted contacts from imac to ipad. When I connect ipad to imac the info button in itunes on the imac does not exist so I cannot sync. My ipad is synced with my old pc without difficulty.

    Hello, shells hip. 
    Thank you for visiting Apple Support Communities. 
    I see you have a new iMac and assume that it is running Mavericks.  With Mavericks the only way to sync information via the Info tab would be to use iCloud.  Here is some information that will walk you through the process of using iCloud. 
    If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
    iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12117
    About iCloud
    Cheers,
    Jason H. 

  • Problems with syncing Ipad with ITunes: apps won't appear on Ipad and organizing icons won't save

    I have a new Ipad 4 for three weeks. Yesterday I start having some problems with syncing my Ipad with ITunes (earlier all was without troubles):
    - downloaded in ITunes on PC apps won't transfer to my Ipad - I press Apply and sync, it goes successfully, but apps won't appear on Ipad.
    - I tried organizing icons on Ipad from PC, press Apply and sync, it all goes succesfully, but on Ipad icons won't rearrange. But ITunes shows that they are rearranged...
    - also I tried syncing my books adding one new book, press sync all books, and new book won't appear. Only when I've chosen every book separately, they transfered.
    I use USB for this.
    I tried resetting my Ipad, reinstalling ITunes on PC, deauthorizing and authorizing my computer, but it didn't help.
    Apple ID are the same on PC and Ipad.
    I hope that I'm not the only one with this problem. And also forgive my mistakes if there are any - English is not my native language. Thank you!

    I know that it is time consuming and a bit of a pain in the butt to have to do it, but I would backup the iPad, restore to factory settings and then restore from the backup, and sync everything back to the device. It's going to take a while because you have a ton of music on the iPad, but IMO, that would be your best option now.
    You could try unsyncing all of the music, and then resync it all again, but that takes time as well. If you are going to spend that much time trying to fix it, you may as well restore the device ...IMO once again.
    Use iTunes to restore your iOS device to factory settings

  • Sync won't start

    New Ipad2. I am trying to sync to ITunes which has my aps from my IPhone. Why do I keep getting sync failed to start messages?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Ipod sync won't start

    iPod 3rd gen.. plug in and get error that sunc won't start.. What do I do now?

    Maybe here:
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities
    iphone could not be synced sync session failed to start...: Apple Support Communities

  • My sync won't start. It stays on step 1. waiting for sync to start, then i receive a notification that it cant

    My sync won't work, it can't start past step 1

    I've been having the same problem. It would either get stuck at "Waiting for changes to be applied" or "Waiting for items to copy". My last successful sync was on 10/15. Tried a number of times either via wifi or direct connect.
    Solved it in the following fashion:
    Connected the phone to the computer via Lightning cable.
    My phone was set to back-up to iCloud. Changed that setting to back up to the computer.
    Unchecked the "Sync Music" option under the music tab.
    Hit apply.
    After a wait - the back-up completed and all the music was removed from my phone.
    Once it was done, re-checked "Sync Music" - it got past "Waiting for Changes to be Applied" at this point.

  • My I-pad sync won't start

    my I-pad won't start to sync

    The Stores are currently down. It is not a problem with your device.  https://www.apple.com/support/systemstatus/

  • So my i just dropped my iPad and now it won't start up. It just keeps turning on and off. Like the apple symbol shows up and then goes away? What happened and is there a way to fix it. I tried restoring and that didn't work

    I pretty much stated it in my question. I dropped my iPad and now it won't boot itself up. The apple symbol shows up, then the screen turns all black and weird looking with a strange green color at the bottom, and just turns off. It keeps doing this over and over. What happened and is there a way to fix it? I also tried connecting it to itunes and that doesn't seem to be working. It detects an ipad but can't seem to read anything else. It tells me to try and restore it but I can't. HELP!!!

    Try this. It worked for a few users after a drop.
    Turn the iPad over and give it a very HARD slap on the back. May take several slaps.
     Cheers, Tom

  • IMac G5 won't start up

    I have an iMac G5 (iSight) 20" that won't start up. Press the power button, the power light comes on, but no startup chord, screen stays black. I can hear a quiet humming sound if I put my ear to the case, either the fan or the hard disk spinning (but no access sounds, if it's the disk). After about a minute the fan comes on high and loud. That's it.
    I've tried (twice) resetting the System Management Unit (SMU), as described in http://docs.info.apple.com/article.html?artnum=301733, but that hasn't helped.
    I tried resetting the PRAM (hold down opt-cmd-P-R and press power button): Fan comes on high immediately, it makes three beeps (not the startup chord), and fan continues while the power light blinks three times - pause - blink three times - etc.
    Anyone have any thoughts?
    Andrew Main

    +I live in San Diego, Ca and that week it had been pretty hot, perhaps it over heated.+
    It's possible; I work mostly with portables, so don't have much experience with this model, but it does have a lot of parts stuffed into that flat case, and I get a feeling it could overheat. The one I'm working with I noted the fan intake on the back was covered with crud, which can't be good; it's not mine and I haven't been to where it was, but apparently there was a lot of dirt around, and a lot of dirt inside it now.
    +I was furious at Apple for selling me an iMac that would break after only 1+ year of use.+
    All technological products fail eventually. Some fail early, some fail later. Apple warrants Macs for a year, which is about normal in the industry. Past the first year, you can either gamble that you'll be among the +great majority+ whose Macs last five years or more, or you can buy AppleCare (which I've never done). You don't even have to buy your AppleCare from Apple; if you shop around a bit you can save 20% or more.
    +I know that the logic board alone is around $600-$800, not including the labor. I could buy another computer, not an Apple, but a pc with that amount of money.+
    As a 20 year Mac user, with 15 years as an independent Mac support guy, I confess I'm just a little tired of the common complaints about the cost of Macs. Macs are not for everyone, no. If a $600-$800 PC would have satisfied your needs (and wants), that's what you should have bought in the first place. It's like going into a Mercedes showroom and complaining to the sales guy that you could buy a Chevy for a fraction of the price. You're just wasting everyone's time.
    Actually, a look at eBay shows this model now selling for ca. $600-$800. That's how the computer world goes.
    You're lucky to be in California, where there are a lot of independent Mac repair providers. (I'm in New Mexico, which is less convenient.) For a computer out of warranty that's what I usually recommend, using refurbished parts rather than the expensive new parts from Apple. For instance, I've done a lot of business in past years with DT&T Service, who will replace a logic board in an iMac G5 iSight for $425-$495 + shipping:
    http://www.dttservice.com/imacg5.html

  • IMac Help - won't start up in OSX, starts to text...

    I was wiping my hard drive so that I could give away my old 20" white iMac G5. It worked fine the first time using the OSX Installation disk, but someone told me I should do it several times to be sure to remove all the data in the binary. So I did it a second time and that worked fine too. I decided to do it a third time so that I could put the new person's info onto the computer and I got a disk error during the re-install. It asked me if I wanted to "try again" so I clicked yes, but something bad must have happened...
    Now the computer won't start up in OSX and it won't boot from the disk (even if I hold down the C key). When it starts up, first I get a gray screen with the apple, then I have a quick flask of a tiny file folder with a question mark, then a quick flask of the same file folder but this time with the Mac face graphic, then the screen goes black and there is a bunch of white text. I can post the text if it will help - at the very end it says something like: localhost:/ root#
    I tried calling apple and they just told me to turn off the mouse and keyboard and try again - didn't work. I have tried to boot in safe mode, I have tried to reboot from the start up disk (it just ejects the disk), I have tried to reset the PRAM, nothing is working. I do not have any peripherals other than the mouse and the keyboard (I had to go out and buy a new wired keyboard today just to push the C button to try to start up from disk since the wireless keyboard wasn't being recognized).
    I have searched all the support docs and nothing seems to work or be just right. I am not an idiot, so if I need to type in a bunch of code that would be fine, just tell me what to do! Otherwise, I am hauling this beast into the so-called Genius Bar.
    Please help!

    So hooked the iMac up to my MacBookPro as a firewire target disk and ran a disk utility on it overnight. It didn't fix the problem completely, but it didn't get worse. Now, instead of the black screen with white programming text, I get a gray screen with a flashing question mark (a file folder that flashes between the mac face and a question mark) this time it just keeps flashing (unlike before where it only appeared once).
    I have tried resetting the PRAM, the NVRAM, and I have tried resetting the SMU (thanks for the advice, Barry, I was hopeful about that one!) but nothing is working. It won't let me start from a disk, even though I have checked the disk in another computer and it works fine. I am thinking that the computer has lost the ability to recognize the disk drive.
    Is there any way to re-install the operating system remotely (via my MacBookPro or anything else)?
    Thanks again for any advice!

Maybe you are looking for

  • JDeveloper bug

    Hello ! When I extended the UIXPageBroker with MyPageBroker in order to read a configuration from the uix-config.xml (necessary for activating PPR) and replacing it inside web.xml, I observed that you cannot preview any uiXML page... Please give me a

  • Filtering specific tables in obiee answers?

    In "Answers", is there a way to apply a filter in one table but keep all data in the other? For example, table 1 would have everything A B C Table 2 would only have: B Do filters always need to be applied across the entire report?

  • ORA-01427: single-row subquery returns more than one row 01427. 00000 -  "single-row subquery returns more than one row"

    Hi All I have facing the  Single row sub query Error . I tried to resolve , but my condition not working .can please any help to rewrite the query (sub query) SELECT DISTINCT wdlsv.serial_number      ,wdlsv.date_shipped      ,wdlsv.inventory_item_id

  • Open .ico files from Bridge CS4

    Hey all, I just got done reformatting my hard drive. After reinstalling my Adobe CS4 software, I can't open .ico files from Bridge -- before the hard drive reformat I COULD open .ico files from Bridge. I can open .ico files directly from Photoshop (I

  • After installing Leopard, spinning wheel does not stop and machine freezes

    Hello everyone, I succesfully install Leopard, got the green check mark, but after the machine restarting, playing the intro movie and asking for my info, I didn't want to register at the moment. Now I'm trying to do it and got the spinning color whe